Used Cuve Inox for sale (439)

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Specifications: Dodpfxey Ryrne Abvswb Capacity: 13,400 L

Condition: excellent (used), Thermix cook chill tanks x 18 Dsdpfx Abszwug Rjvjwb

Condition: good (used), Armor Inox Thermix Cook Chill System Operates using Thermix patented modular cooking and chilling process. It works by immersion with continuous circulation of water and recycling of hot, cold and chilled fluids. Assures best heat transfer and temperature control. 16 tonne system comprising 16 x 2 x 500 litre cook tanks, water storage tanks, panels, valves, pipework etc. Additional pipework, control system and valves would be needed if this was to be re-installed as some has been used already. Cost £3.5M Dodpfx Aboqyhakjvowb

Condition: used, Year of construction: 2015, Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Technical data - Application: Beer (bottles & cans) - Filling type: Isobaric Filling & Seaming - Bottle formats: 33 cl, 50 cl, 75 cl - Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) - Can formats: 33 cl, 44 cl, 50 cl - Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Brewhouse - Capacity: 650 L - Heating: Propane gas - Electrical: Single-phase Fermentation & Cooling - Total fermentation capacity: 9,800 L - Stabilization capacity: 2,940 L - Dimensions (refrigeration unit): approx. 1,100 × 930 × 840 mm Scope of Delivery  - Isobaric Bottle & Can Filler | Inox CG | — | — | 350–400 bph/cph - Can Seamer | — | — | 2022 | Brand new, never used - Brewhouse | — | — | 2015 | 650 L, propane gas, agitator - Refrigeration Unit | W3/4 | — | 2020 | Multi-unit control, 4 zones - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, cooling jacket (Unit 1) - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, airlock (Unit 2) - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 650 L, dry-hopping port - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 320 L, dry-hopping port - Atmospheric Fermenter | — | — | 2015 | 650 L, non-insulated - Semi-Automatic Labeller | — | — | 2015 | Circular reel labels Dedpfx Aey Sccxobvowb - Stainless Steel Kegs | — | — | — | 50 pcs, 30–50 L

Condition: used, Year of construction: 2016, Overview  This complete 1,500 L brewhouse system was manufactured by Spanish company Inox GC. It includes a three-vessel hot side, a 2,000 L mash/whirlpool tun, a 2,500 L lauter tun, and a 1,800 L hot water tank. The brewhouse comes with pumps, heat exchanger, CIP features, and a new AEM automatic gas burner for heating. The equipment is in good condition. Technical data - Brewhouse System – Inox GC (1,500 L) - Capacity per batch: 1,500 L - Vessels: HLT, mash/lauter tun, kettle/whirlpool - Material: AISI 304 stainless steel - Heating: Compatible with automatic gas burner - Includes: Temperature control panel, integrated pumps Dwodpfx Ajyb S D Nsbvsb - Isothermal Mash & Whirlpool Tun (2,000 L) - Capacity: 2,000 L - Insulation: 50 mm rock wool - Features: Hinged lids, agitator with VFD, CIP system, PT100 probe - Isothermal Lauter Tun (2,500 L) - Capacity: 2,500 L - Features: 5° sloped bottom, 500 mm manway, German V-screen, automatic rake, CIP system - Insulated Hot Water Tank (1,800 L) - Capacity: 1,800 L - Heating: 9 kW electric element - Features: Rock wool insulation, 50 mm inlet/outlet, CIP system - Process Equipment - Wort pumps (helical & transfer) - Tubular heat exchanger (removable) - Hop filter - Automation panel with VFDs - Automatic Gas Burner – AEM GR8 PHP (2016) - Type: Circular gas burner, automatic ignition

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Dwjdjyb S Dvopfx Abvsb Technical data & Scope of Delivery  - Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket - Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling - Isobaric Fermenter | Inox GC | — | 2024 | 4,800 L; cylindro-conical; isobaric; Double jacket for glycol circulation; carbonation stone in the cone - Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket - Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket - Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity - Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new

Condition: used, Year of construction: 2014, Overview  This 20HL brewhouse was built in 2014 by Spanish manufacturer INOX DUBRA. It can be visited at any time.    Technical Details Rash wort: 20 HL  Steam heated   Electric panel to control both pumps and heating temperature  Opening of valves done manually   Scope 2 vessel brewhouse   1x water tank 3300L with cooler   Heat exchanger  Accessories as different hoses, two pumps, etc.   Dodpoukafxjfx Abvewb

Condition: used, Used stainless steel tank Last application: Chemicals Article number: 10909 Volume: 1450 liters Dodpfx Abszxz Anevswb Type: Standing on 4 rollers Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Tank dimensions: Inner diameter: 1400mm Cylindrical height: 1000mm Height of legs: 240mm Overall height: 1200mm Overall width: 1446mm Materials: Inside: 1.4301 / AISI304 Exterior parts: 1.4301 / AISI304 Features: Nameplate: yes Distance from drain to bottom: 190mm Outlet diameter: 50mm

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Dwodpfx Abezmt Ufsvob Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Dwjdpfx Abszwmr Esvjb Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Dwedpow Dy Hlefx Abveb Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: new, Factory-new, electrically heated stainless steel mixing tank Article number: EBB150RWAD Volume: 152L Dimensions approx.: Ø 660mm x cylindrical height 625mm Overall height: 910mm Material: 1.4301 stainless steel V2A Surface: Matte finish inside and out Welds ground smooth Operating temperature max.: 110°C Operating pressure tank: ATM -Vertical design on rollers -Top: Central cross member for the agitator with two hinged lid halves -Bottom: Flat bottom with side outlet DN50 DIN11851 and disc valve Dwjdpsh Hxxfofx Abvjb -Agitator flange on the top -2x handle for pushing -1x nameplate Heating system: Indirect heating Double jacket around the tank with glycerine filling as the heat transfer medium. Heating is carried out by an electric heating element in the double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. supply line 16A CEE plug Centric agitator: Slow-speed anchor agitator with wall scrapers Type: SRTGMK/0.37-9.5 Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.37KW Speed: 0-9.5 RPM Operating voltage: 1PH 230V Material in contact with product: 1.4301 stainless steel -Gearbox and motor in the latest aluminum technology, manufacturer Getriebebau NORD -Gearbox with food-grade approved oil filling "Klüber" -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of large anchor agitator in the tank, welds ground smooth, arranged close to the wall -2 Teflon wall scrapers in the cylindrical area, one at the bottom -Stainless steel flange with shaft seal, EPDM Speed control: Compact frequency inverter on the agitator motor with on/off switch and potentiometer Control: 5m cable and RCD socket switch, undervoltage release Eccentric agitator: Speed-adjustable dissolver agitator Type: SRTMKD/1.1-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 1.1KW Speed: 0-1690 RPM Operating voltage: 3PH 400V Material in contact with product: 1.4301 stainless steel -Motor in the latest aluminum technology, manufacturer Getriebebau NORD -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of dissolver disc Ø 125mm screwed onto the end of the agitator shaft, seal O-ring, EPDM -Stainless steel flange with V-ring seal, EPDM -Stainless steel spacers for motor mounting Speed control: Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. On/off switch, potentiometer, phase inverter Control: CEE plug switch on the tank with undervoltage release and phase inverter, emergency stop

Condition: new, Factory-new electrically heated stainless steel mixing tank, insulated, with propeller agitator, including operating manual and CE declaration of conformity. Model: EBB150RWP Also available with alternative agitator types and in other sizes. Capacity: 152 L Approximate dimensions: Ø 660 mm x cylindrical height 625 mm Total height: 910 mm (+ agitator motor) Material: 1.4301 (V2A) stainless steel Finish: IIIc / 2B Weld seams ground Maximum operating temperature: 110°C Operating pressure (tank): atmospheric -Upright design on castors -Top: Hinged lid, half bolted, half hinged, with removable stainless steel safety grid -Bottom: Flat bottom with lateral outlet DN50 DIN 11851 and disc valve, EPDM gasket -Agitator flange connection on top -2x push handles -1x type plate Agitator: Propeller agitator Dwsdpeym Uclefx Abvob Power: 0.25 kW Speed: 980 rpm Operating voltage: 3-phase 400 V

Condition: good (used), Used, insulated stainless steel tank with agitator and double jacket Last use: Food Article number: 10340 Volume: Approx. 6300L Type: Standing on three legs Material (in contact with media): 1.4301 / AISI304 Design: Insulated with double jacket at the bottom Bottom: Flat bottom Top: Domed Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 2030mm Cylindrical height: 2000mm Distance from outlet to bottom: 330mm Height of legs: 390mm Overall height: 2940mm Overall width: 2050mm Dwodpfx Ajd Nap Robvjb Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Domed lid Ø 490mm Outlet diameter: 40mm Slow-speed agitator Cylinder insulated Bottom with double jacket

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 Dsdpfx Ajuy Ribebvswb 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Dsdow Dy D Dspfx Abvswb Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V Dwsdpeym Arbofx Abveb

Condition: new, Electrically Heated 545L Stainless Steel Agitated Tank Type: EBB500RWP Includes operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in different sizes. Volume: 545L Dimensions approx.: Ø 950mm x cylindrical height 880mm Total height: 1120mm plus agitator motor Material: 1.4301 / AISI304 stainless steel Surface finish: Internal and external IIIc/2B Internal weld seams ground Dwedpfxow Dy Dds Abvjb Max. operating temperature: 110°C Max. operating pressure: ATM - Vertical design on four legs with forklift tunnel - Top: Hinged lid, central crossbeam with two hinged lid halves - Bottom: Flat bottom with side outlet DN50 DIN11851 and disk valve - 2x side handles - 1x nameplate Propeller agitator for low-viscosity media Power: 0.75KW Speed: 1410RPM Operating voltage: 3PH 400V

Condition: new, Factory-new stainless steel agitator tank with propeller agitator Type: CILC100BRWP Volume: 109L Design: Vertical construction on legs Version: Single-walled Product-contact material: 1.4301 stainless steel Surface: Satin-finished exterior, interior BA finish Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Hinged lid, half bolted, half foldable Bottom: Conical bottom with forward-extended DN25 pipework, DIN11851 Tank dimensions: Tank diameter: 477mm Overall height: 930mm (plus agitator motor) Cylindrical height: 600mm Leg height: 330mm Equipment: - Hinged lid with stainless steel sheet grate as reach-in protection, bolted, removable - Hold function for hinged lid - 1x DN25 discharge ball valve, DIN11851 Agitator: Propeller agitator Brand: Schwarzer Rührtechnik GmbH Type: SRT4-1000 Power: 0.25kW Speed: 980 RPM Operating voltage: 3PH 400V Dwedpfsw Dy H Sox Abveb Product-contact material: 1.4301 stainless steel - Heavy-duty agitator shaft mounted to agitator motor, non-removable - Shaft balanced for concentricity within speed range - 1 piece 3-blade mixing propeller Ø125mm screwed onto end of agitator shaft - Stainless steel flange with V-ring seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, emergency stop, phase inverter, no-voltage release

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Prepared for agitator Type: SBPA150 Item number: 10796 Volume: 173 liters Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Dwedpfx Absr A Engoveb Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable DN50 ball valve outlet fitting DIN11851 Galvanized transport pallet Type plate

Condition: new, Brand new stainless steel container Article number: 10846 Volume: 550 L Type: Standing on a plastic pallet Material (in contact with the media): Stainless steel V2A / AISI 304 Number of fixings: Plastic pallet Bottom: Dished bottom Max. operating pressure: Atmospheric Container dimensions: Inner diameter: 815mm Outer diameter: 890mm Total height: 1330mm Cylindrical height: 1070mm Total width: 890mm Materials: Inside: 14301 / AISI 304 Outside parts: 14301 / AISI 304 Facilities: Nameplate: no Outlet diameter: 50mm Distance from drain to floor: 160mm Dwedev Dunfepfx Abvsb

Condition: good (used), Used stainless steel process vessel Article number: 10302 Volume: 200 liters Type: Standing on rollers Material (media-contact): V2A / AISI 304 stainless steel Number of fixations: 4 rollers Bottom: Dished bottom Top: Removable dished bottom Operating pressure according to nameplate: ATM Vessel dimensions: Inner diameter: 670 mm Outer diameter: 690 mm Height of feet: 220 mm Distance from drain to bottom: 1. 340 mm, 2. 330 mm Overall height: 1700 mm Overall width: 1020 mm Materials: Inside: V2A / AISI 304 External parts: 1.4301 / AISI 304 Dedpfx Ajd H Tvzebvjwb Equipment: Nameplate: No Outlet: Bottom valve Various connections Removable top Control box Propeller agitator present

Condition: new, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Tank dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable Dodpfx Asw Dy Ngobvowb - Tank mounted on a stainless steel transport base with forklift openings - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Year of construction: 2025, condition: new, Brand new stainless steel agitator tank with beam agitator and load cells CILC2000RWS Volume: 2107L Dwjdovtyf Iepfx Abveb Dimensions approx.: Ø 1430mm x cyl. Height 1250mm Total height: approx. 1650mm (plus agitator motor) Material: 1.4301 stainless steel V2A Surface: inside BA (IIId), outside satin finish Welding seams in the container ground -Standing design on three feet -Top: hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in 90° open position) -Metal grates below the hinged lid as protection against soap, screwed, removable -Bottom: conical bottom with central outlet DN50 DIN11851 nozzle -Agitator flange on the top -1x reserve nozzle DN50 DIN11851 on the top with blind cap -Type plate -180° spray head - Weighing cells - Speed control Agitator: Bar agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/1.5-149 Power: 1.5KW Speed: 149RPM Operating voltage: 3PH 400V -Gearbox made by Getriebebau NORD -Solid agitator shaft with sleeve coupling attached to the gear motor, removable -Agitator shaft balanced for concentricity in the speed range -2 2-blade bar agitators Ø 500mm, height adjustable on the agitator shaft, attached via side power screws Grilled and passivated -Stainless steel flange with shaft seal and O-ring seal -MFR converter

Condition: new, Brand new, heatable/coolable stainless steel container with double jacket/thermoplate and insulation Bases available! Item number: 10712 Volume: approx. 270L Type: standing design on three feet Design: with thermoplate and insulation Material (in contact with media): 1.4301 stainless steel Surface: IIId, satin finish on the outside Inside weld seams: ground Operating pressure: ATM Operating pressure thermoplate: +1.8 bar Max. operating temperature: 95°C Top base: conical base 15° Bottom base: conical base 60° Container dimensions: Outer diameter: approx. 537mm Inner diameter: 477mm Cylinder height: 1200mm Total height: 1833mm Height of feet: 550mm Equipment: 1x thermoplate H=600mm around cyl. Part of the container, inlet/outlet 1/2" sleeve 1x insulation t=30mm rock wool for cylinder and base, welded stainless steel insulation jacket 1x dome cover DN300, clamp and seal EPDM Dsdsv Durkepfx Abvswb 2x DN65 DIN11851 sight glass on the top / dome cover, provided 1x 1/2" nipple on the top 1x spray head in the container through the side wall, 360° rigid. 1x weld-in sleeve on the side, provided 1x outlet DN32 DIN11851 threaded connector 1x nameplate