Used Fps for sale (298)

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Psdpfx Agezac Sbjxjgp

Year of construction: 2010, condition: good (used), Our Asys buffer system is for sale. Type: FPS 30 B Year of manufacture: 2008 Condition: good Pgedpfx Ageyylqzoxop Available immediately

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, Deckel FP1 FPS retrofitted tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a training department. Adjustable tilting table, SK 40 spindle taper. Accessories include various collets and arbor holders. In good, ready-to-use condition. Test run under power can be arranged by appointment. Pedpfoy Dz T Tjx Agxegp

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table Pgsdsu Dm E Hopfx Agxjp >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 Pgsdpsvbifgefx Agxsp >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: new, Year of construction: 2026, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Pgedpfjh Su Ipox Agxop Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes Pjdpfxsh I Nqwe Agxogp X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed Pgsdpfx Aeyitxqsgxjp 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: new, Year of construction: 2026, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Podpfx Agjh R S Tcexegp Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Podpfoh Sptnox Agxjgp Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: used, Year of construction: 2002, Gathering machine / booklet making Theisen & Bonitz TB ECO A 308 FP + TB Sprint QSM 303 8 stations, manual feeder TB ECO 308 FP Performance: up to approx. 3,100 cycles per hour Psdpfx Agjzicw Uoxogp Maximum book block thickness: 50 mm Stack height per station: 50 mm (5 cm) Paper and format range Maximum sheet size: 310 × 430 mm Minimum sheet size: 105 × 148 mm (DIN A6) Paper weight: 20 to 1,000 g/m² TB B304 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Year of construction: 2004, condition: used, functionality: unexamined, ASYS Rommel PCB Transport System – Items 1x LAG 55 WA Magazine Loader 2x TRM 01-S (1x OK, 1x spare part) 1x LAG 55 WA 470 Magazine Loader 1x LBE 55 WA 470 Magazine Unloader 2x FPS 30 Transport and Buffer Module - All devices are untested; however, where a power connector was present, at least the display was switched on and booted. Podpfx Aszktx Eogxogp - For an additional charge, we can arrange shipping or assist with it.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, total length: 6,800 mm, total width: 2,500 mm, total height: 3,700 mm, working height: 500 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, Lisec gas filling press FPS-36/27US, year 2006, working diresction from left to right, consisting of following: RTVN-27/27MZ, measuring section for gas filling press (length, height, glass thickness and spacer size) FPS-36/27US, gas filling for argon gas GML, gas dosing device The machine is in good working condition and will be sold as is EXW current location in Romania, dismantled and loaded to truck. It is available immediately Psdpszpvx Sjfx Agxsgp

Condition: as good as new (ex-display), Year of construction: 2025, Schiatti Angelo FPS-M4 Glas edging machine for straight edge and arris 2x straight edge spindle (1x Diamond, 1x Polishing wheel) 2x arris spindle (2x Polishing wheel) - Glasthickness 3-20 mm - min. glas size 60 x 60 mm Pedpfxewd E D Ne Agxsgp - Max. Loading weight 150 KG - Height 830 mm - massive and longlasting conveyer - manual thickness adjustment - tanks for waste water - 1,2 meters in- and outlet - Total length 4455 mm

Condition: ready for operation (used), Year of construction: 2003, pressing force: 138 t, number of axes: 6, This 6-axis GASPARINI PBS 1 125/4000 FP was manufactured in 2003. It features a bending width of 4000 mm and a press force of 135 tons. With 4 back gauge axes (x, r, z1, and z2), this machine offers enhanced precision for your bending applications. If you are looking to get high-quality bending capabilities, consider the GASPARINI PBS 1 125/4000 FP press brake we have for sale. Contact us for further details. • Backgauge: 4 axes (X, R, Z1, Z2) • Press force: 135 t • Bending width: 4000 mm Podpfx Agezauftexogp Technical Specification Bending Length 4000 mm

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (by phone at ...). Model: CO S-WAY AD190S40/FP4x2 Beverage Box Body with Swing Wall and Tail Lift. Pgjdpoyfvgpjfx Agxep Tail Lift: BÄR BC 2000 S4-C4 (2,000 kg). Body: BÖSE. Body dimensions (internal): approx. 6,800 x 2,470 mm (designed for 16 Euro pallets). Side passage height approx. 2,100 mm. Continuous side walls. Full roof retraction possible when open. Bulkhead allows smooth loading through. Speed limiter: 90 km/h. Front headlights: halogen. Cab: AD with flat roof. First aid kit, plastic bumper, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, manual cab tilting mechanism, front headlights halogen, black decorative film on doors, rear cab wall without window, AD cab with flat roof, front underrun protection for chassis with gross weight over 7,490 kg, first aid kit, plastic bumper, cab attachments black, unheated windshield, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, rear air suspension, Hi-TroniX 12TX 1810 TD, front axle air suspension, 2 wheel chocks, generator 2,160 W (24V x 90A) – recommended for tail lift operation, rear shock absorbers, chassis frame in grey, steel air tanks (number depending on suspension and trailer version), front stabilizer, exhaust pipe to the left, emission standard EURO VI E, ride height with second setting, rear frame overhang: 2,388 mm, fuel tank: 290 L aluminium, AdBlue tank: 50 L, rear axle ratio: i 3.36, heated fuel pre-filter with separator, preparation for toll system (OBU) including antenna and cabling on dashboard, no receiver, 4G connectivity box including TCO service contract, ECO-switch for changing from Power to Eco mode to optimize Total Cost of Ownership (TCO) via fuel-efficient engine and transmission settings, VDI (Vehicle Data Interface) for telematics (FMS) version 4.0, transmission software ECO-Roll (coasting function), driving style analysis (DSE), Adaptive Cruise Control (ACC), Lane Departure Warning System (LDWS), warning triangle according to ECE-27 regulation, warning beacon, Electronic Stability Program (ESP), Advanced Emergency Braking System (AEBS), Drive tires: 315/70R22.5, mechanical roof hatch, fog lamps incl. cornering lights, cab air suspension, transparent sun visor mounted outside on cab roof, leather steering wheel, air horn behind bumper (compressed air), luxury driver seat: air-suspended, heated, multi-adjustable, right armrest, lumbar and headrest, with integrated three-point seatbelt, fully automatic climate control, ashtray in centre console, front axle weight variant 8,000 kg/rear axle 11,500 kg (technically possible: 13,000 kg), heavy-duty rear stabilizer D 60 mm, battery master switch in cab, electrically operated, 2-cylinder air compressor 630 ccm, battery charging socket, terminals, trailer socket for 24V operation, 15-pin, tow hitch by Rockinger, trailer version for use with continuous braking system, rear cross member, D-value: 130 kN, 40 mm tow hitch, 130 kN, edge protection at frame end, Iveco DAB+ radio with Bluetooth, integrated microphone, Mini-USB/…

Condition: ready for operation (used), Year of construction: 1985, travel distance X-axis: 2,500 mm, table length: 5,000 mm, table width: 2,500 mm, spindle speed (max.): 2,000 rpm, total height: 125,000 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840, number of axes: 5, This 5-axis WALDRICH COBURG 17-10 FP NC/5 was manufactured in 1985 and lastly retrofitted in 2011. It features a maximum workpiece weight of 60 tons and a substantial table size of 2,500 mm by 5,000 mm. The machine is equipped with a Sinumerik 840 control system, ensuring precision in operations. If you are looking to get high-quality milling capabilities, consider the WALDRICH COBURG 17-10 FP NC/5 gantry milling machine we have for sale. Contact us for further details. • Max. workpiece weight: 60 tons • Tool Taper: ISO 60 • Milling Width without Column Covers: 3000 mm • Milling Width with Column Covers: 2850 mm • Cross Travel of the Milling Support: 5270 mm • Distance Table to Face of Vertical Spindle: 2750 mm • Vertical Travel of the Cross Rail: 2250 mm • Clamping Length: 5000 mm • Longitudinal Travel of the Table: 5700 mm • Table Height Above Floor: 500 mm Pgjdpfx Agoy S Twysxjp • Machine was retrofitted in 2011, 2008 and 1997.

Year of construction: 2016, condition: used, overall weight: 300,000 kg, total length: 16,000 mm, total width: 9,000 mm, total height: 8,000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling MachineMachine: 17-10 FP 300 NC / 5 mSerial Number: 2.8304.06Original Year of Manufacture: 1983In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction.The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17, ensuring versatile machining capabilities for demanding milling tasks.The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation.The system has been professionally dismantled and packed in containers.It is located at the Port of Hamburg and is immediately available and ready for worldwide shipment.Manufacturer: Waldrich CoburgOverhauled by Waldrich Coburg (2016)Siemens SINUMERIK 840D slUniversal Fork Milling Head USP 300 C 350Additional Angle Milling Head WFU 500 SZ 400 F17Workpiece weight up to 100 tFull protective enclosureExtensive technical documentation availableDismantled and ready for loadingLocation: Port of Hamburg, GermanyImmediately available Passage between the uprights: 3,500 mm 5-axis machining: Yes Pgjdpfx Agozc Sagexjp Travel Y-axis: 3500 - mm Weight approx.: 300,000 kg Travel W-axis: 800 - mm Travel Z-axis: 2050 - mm Tool holder type: ISO 50 Travel X-axis: 5700 - mm Movement B-axis: 0 - 180 ° Dimensions (LxWxH) approx.: 16000 x 9000 x 8000 mm Year of construction: 2,016 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: FOB Free On Board under power: No

Condition: ready for operation (used), Tool milling machine DECKEL FP 3 with Heidenhain digital display - Well-maintained, original condition - Travel ranges X/Y/Z 500x300x400 mm - Feeds / rapid traverses in all 3 axes - Tool holder ISO 40 - Speed range 40 - 2000 rpm - Vertical / horizontal milling capability Podpfjzcxtajx Agxjgp - Swivel table - Coolant system - Central lubrication - Chip tray - Documentation Dimensions: L x W x H 1.7 x 1.2 x 1.8 meters / Weight 1350 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,400 kg, fork length: 1,400 mm, Fork positioner ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Pgsdpjzi H N Uefx Agxsp Year 2019 ISO 2B (41 cm) Capacity 1400 kg Side shift Opening range 540-1545 mm Width 850 mm Fork length 1400 mm ID OS2010

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,400 kg, fork length: 1,200 mm, Fork positioner Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Pgjdezi H N Ispfx Agxep Description: Year 2019 ISO 2B (41 cm) Capacity 1400 kg Side shift Opening range 545-1765 mm Width 1050 mm Forks 1200 mm ID OS2009

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,200 kg, fork length: 1,200 mm, Fork positioner Pgodpfxjzi H Nus Agxsp Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018, ISO 2A (41 cm), Capacity 2200 kg, Sideshift, Opening range 560-2000 mm, Width 1250 mm, Forks 1200 mm, ID OS2007

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 2,500 kg, Fork positioner ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Pgjdpfxjzigt Te Agxop Technical condition: good Description: Year 2013, ISO 2B (41 cm), capacity 2500 kg, opening range 340-990 mm, width 1050 mm, sideshift ID OS1978.

Condition: ready for operation (used), DECKEL FP 2LB, including a 3-axis digital display, from a university, in well-maintained original condition. - 3-axis digital display "ACURITE" - Travel distances X/Y/Z: 795x300x400mm - Automatic feeds (18 speeds) / rapid traverses in all 3 axes - Spindle speed range: 40 - 2000 RPM (18 speed levels) - Vertical/horizontal milling capability - Swiveling vertical head with drilling quill - ISO 40 tool holder Pjdozbi I Eepfx Agxjgp - Table surface (angular table): 1000x440mm - Table clamping surface with additional table: 1000x770mm - Coolant system - Various tool holders - Machine light - Documentation Dimensions: L x W x H: 2.5 x 2.4 x 1.8 meters / Weight: 2200 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertical glass edging machine + water cleaning system Clean 20 glass thikness : 3 - 30 mm Pedpfxsyhpqae Agxsgp min. glass size : 50 x 50 mm max. glass weight : 1000 kg working height : 812 mm total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant . 67000 working meters total machine lenght : 720 cm