Used Fps for sale (244)

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 Fpjdpfx Aszinzxog Top - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, mileage: 20,000 km, power: 100 kW (135.96 HP), first registration: 05/1992, fuel type: diesel, empty load weight: 4,790 kg, overall weight: 7,490 kg, tire size: 8,5 R 17,5, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: constant throttle, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 9, total length: 6,750 mm, total width: 2,380 mm, total height: 2,800 mm, loading space length: 2,900 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Equipment: additional headlights, cabin, differential lock, fog lights, trailer coupling, Vehicle location: Bovenden, steel superstructure, Doka, double bench seat, sun visor, switch 5, constant throttle, power take-off, tachograph, differential lock, fog lights, work lights, rotating beacon, leaf suspension, trailer coupling ball head Wheelbase: 3800 mm Body: Ziegler box body with roller shutters, built-in pump FP 8/8 and 600l fire water tank double cab, Ziegler box body with roller shutters, fire water tank 600L, built-in pump FP 8/8 (approx. 78 operating hours), trailer hitch, differential lock rear axle, brake hydraulic 2-circuit / compressed air 2-circuit, load-dependent brake, stabilizer rear axle reinforced, parabolic springs front and rear reinforced level II, flame start system, top speed 102 Km/h The sale to tradesmen or export is subject to 19% VAT! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fpjdpfsvhhyvox Ag Tep - .

Condition: good (used), Year of construction: 2023, functionality: fully functional, TEXA Konfort 760 Touch RID incl. integrated refrigerant analysis for refrigerant R1234yf KONFORT 760 TOUCH, complete with 10" touch display, 20 kg refrigerant tank, 100 l/min capacity, two-stage vacuum pump, and Bluetooth and Wi-Fi interfaces. Equipped with a vehicle database, protective cover, and manual. TECHNICAL SPECIFICATIONS Suitable for R134a or R1234yf Suitable for BUSES (760 Touch BUS) Fully automatic service control Automatic leak detection Refrigerant measurement with electronic scales Oil contamination prevention system - ATB (Air Tight Bottle - patented) Automatic oil management with electronic scales Measurement of recovered oil quantity by electronic scale Compatible with hybrid vehicles Automatic maintenance management (DATABASE) Manual maintenance control Safety system FPS (Fan Protection System) Internal flushing when changing oil type Service report printout via Wi-Fi 10" touch display Suitable for KONFORT APP Refrigerant tank 20 kg (760 TOUCH) Refrigerant tank 30 kg (for 760 BUS TOUCH) Filling accuracy +/- 15 g High refrigerant recovery rate (over 95%) Two-stage vacuum pump Automatic oil container recognition (patented) Scales locking system Operating mode: DATABASE Operating mode: MANUAL SERVICE Operating mode: MY DATABASE Multilingual software Fpsdpowzhnrsfx Ag Tsp Automatic service hose compensation Automatic maintenance management Simplified maintenance Automatic control of non-condensable gases Remote customer support Highly accurate automatic oil injection Automatic updates Incl. POE oil container for hybrid vehicles Incl. thermal printer

Condition: like new (used), operating hours: 50 h, Open tube 160kV HR – High Resolution – W Target (4W) & Standard W target (10W) Fodpjymmapefx Ag Topp 1308 HR FP Detector (13x08cm) High & Medium Quality and Realtime modes Detector Tilt ± 60° 24” Ultrasharp monitor BGA & Area Void analysis Traceability package X-ray ‘ON’ hours ~45 hour Win10 PC Available for transport!

Condition: as good as new (ex-display), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 2801 002016, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, quill stroke: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table width: 620 mm, table length: 390 mm, table load: 250 kg, overall weight: 1,700 kg, space requirement width: 1,800 mm, space requirement length: 1,400 mm, space requirement height: 1,800 mm, input frequency: 50 Hz, Equipment: documentation/manual, The machine is very stable and robust in its design and construction. Thanks to its good accessibility, it is extremely user-friendly. The machine can also be operated using mechanical handwheels. CNC Contouring Control DECKEL Dialog 4 Easy-to-program 3D path control with color graphic support, dialog-guided cycle input, contour calculator, editor functions, clear program and tool management, and the option for parallel programming. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull stud according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manual quill stroke: vertical 80 mm and horizontal 65 mm. Milling head: Manually swiveling +/- 90° Speed range: 31.5–6300 rpm stepless, geometrically stepped direct gearbox for maximum torque and milling performance at the working spindle. Fsdpfxjywhvhs Ag Tjpp Direct gearbox for maximum torque and milling performance at the spindle. Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angular table: 620 x 390 mm, max. load 450 kg

Condition: used, mileage: 48,856 km, power: 177 kW (240.65 HP), first registration: 06/1998, fuel type: diesel, empty load weight: 8,260 kg, maximum load weight: 5,740 kg, overall weight: 14,000 kg, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: engine braking, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 8, total length: 7,200 mm, Equipment: ABS, all wheel drive, differential lock, Schlingmann LF16/12, water pump Rosenbauer FP 16/8 with a delivery rate of 1,600 l/min at 8 bar, scene lighting, light mast, rapid intervention hose, water tank. Non-binding offer – subject to prior sale and modifications – sale is made without any warranty – all information provided without guarantee! Fedpfx Ageygmfxj Tspp

Condition: good (used), Stock no.: 3010 Manufacturer: Deckel Machine number: 31488 Type / Model: FP 1 Fedpow D N Thjfx Ag Tjpp Travel paths x-y-z: 300 - 150 - 340 mm Table: 600 x 200 mm Speed range: 40 to 2,000 rpm Spindle taper: MK 40 Feeds: 16 to 500 mm/min Power supply: 1 / 1.5 kW Accessories/Equipment: Elesta digital readout Condition: good Weight: 0.8 t Dimensions: 800 x 1,000 x 1,800 mm

Condition: used, Name: Used chamber filter press Manufacturer: Diefenbach Type: FP DE800-90 Year built: 1997 Plate size: 800 x 800 mm Number plates: 90 Press content: approximately 1350 liters Filter area: Approx. 99 m2 Filter pressure: 15 bar Cake thickness: 30 mm Cycle: Closed Plate transport: Automatically Fpsdpjzy H Dgsfx Ag Tsp Plate material: Polypropylene Construction form: Bridge beam press Filter cloth washer: No Filter cloths: No Dimensions: L 8500 x W 1300 x H 2100 mm Empty weight: approx. 8000 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system, a light barrier Condition: Second hand Price: By request

Condition: used, mileage: 33,000 km, power: 159 kW (216.18 HP), first registration: 12/1986, fuel type: diesel, empty load weight: 8,100 kg, maximum load weight: 5,400 kg, overall weight: 13,500 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 6, Equipment: all wheel drive, cabin, differential lock, fog lights, parking heater, trailer coupling, Vehicle location: Bovenden, Doka. Features: 1 air suspension seat, 5-speed manual transmission, auxiliary drive, differential lock, fog lights, storage compartment, leaf spring suspension, trailer hitch. Fpsdpfx Agjk D Smbj Tjp Wheelbase: 3600 mm. Body: Tank fire engine TLF16/25 with a body manufactured by Bachert, 2500-liter water tank & built-in pump FP 16/8. Body length approx. 3700 mm! Spare wheel available for an extra charge! Sale to businesses or for export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET A quality. Also applicable to all COLD JET blasting machines. AERO 30 AERO 40 FP / HP AERO 75 DX AERO 80 FP We have all parts in stock for these machines. Please contact us. Worldwide shipping. Fpodpfxsztkv He Ag Tep Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, mileage: 26,610 km, power: 64 kW (87.02 HP), first registration: 05/1990, fuel type: diesel, empty load weight: 3,930 kg, maximum load weight: 2,070 kg, overall weight: 6,000 kg, tire size: 8.5R17.5, axle configuration: 4x2, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, Equipment: cabin, Vehicle location: Bovenden, Doka, switch 5, rotating beacon, storage box, leaf suspension, U-protection Body: Magirus LF8 fire-fighting vehicle with FP 8/8 front-mounted pump Sale to tradesmen or export is subject to 19% VAT! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fodpjvhkf Iofx Ag Tjpp - .

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps - Quill movement on vertical milling head: 60 mm Fpodpor D T Uyefx Ag Tjp - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: used, mileage: 46,500 km, power: 85 kW (115.57 HP), first registration: 04/1988, fuel type: diesel, empty load weight: 4,270 kg, maximum load weight: 2,330 kg, overall weight: 6,600 kg, tire size: 8,5R17,5, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: constant throttle, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, total length: 7,000 mm, total width: 2,400 mm, total height: 2,750 mm, Equipment: additional headlights, cabin, differential lock, fog lights, Vehicle location: Bovenden, Doka, double bench seat, switch 5, power take-off, differential lock, work lights, rotating beacon, storage box, leaf suspension Wheelbase: 3700 mm Body: Ziegler box body with roller shutters & front pump FP 8/8 Body length approx. 2800 mm! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fsdpfx Aevhkfhjg Tspp - .

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz Fpedsv R E Rdopfx Ag Tsp - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine Manufacturer: Deckel, Type: FP 5 CC Year of manufacture: 1990 Fjdpfez S Ubcsx Ag Tspp Control system: Dialog 11 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 550 mm Spindle speed: 25 - 6,300 rpm Tool holder: SK 40 Drive power: approx. 12 kW Machine weight: approx. 5000 kg

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Fpodpfx Aor U St Ujg Top Weight: 770 kg Good condition

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° Fsdpfoyi Amwox Ag Topp • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: used, mileage: 32,610 km, power: 162 kW (220.26 HP), first registration: 10/1996, fuel type: diesel, empty load weight: 6,360 kg, maximum load weight: 4,140 kg, overall weight: 10,500 kg, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 3,650 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, Equipment: ABS, additional headlights, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 6, ABS (anti-lock braking system), differential lock, work lights, storage box, leaf suspension, low-noise G1, U-protection, roof hatch, environmental badge red Wheelbase: 3650 mm Body: Fire-fighting support vehicle with Ziegler box body, 1250 l extinguishing water tank, 100 l foam compound tank & FP 16/8 pump Sales to tradesmen or export are subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fsdpfovhkfnjx Ag Tepp - .

Condition: used, mileage: 11,590 km, power: 100 kW (135.96 HP), first registration: 04/1994, fuel type: diesel, empty load weight: 4,760 kg, maximum load weight: 2,730 kg, overall weight: 7,490 kg, tire size: 8,5R17,5, axle configuration: 4x2, brakes: constant throttle, color: red, driver cabin: other, gearing type: mechanical, emission class: euro1, suspension: steel, number of seats: 9, Equipment: ABS, additional headlights, cabin, fog lights, power assisted steering, Vehicle location: Bovenden, Doka, switch 5, fog lights, rotating beacon, storage box, leaf suspension, trailer hitch Superstructure: Ziegler box body with roller shutters, rear pump FP 8/8 & 640l water tank, differential lock rear axle, stabilizer bar rear axle reinforced, stabilizer bar front axle reinforced for extreme high loads, transmission oil cooling, parabolic springs front and rear reinforced level II. Fpsdpfxjvhif Ts Ag Tjp The speedometer was replaced at 18642km! The sale to traders or export is subject to 19% VAT! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 54,065 km, power: 85 kW (115.57 HP), first registration: 11/1988, fuel type: diesel, empty load weight: 4,130 kg, maximum load weight: 2,470 kg, overall weight: 6,600 kg, tire size: 8,5R17,5, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: constant throttle, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, Equipment: additional headlights, cabin, differential lock, fog lights, Vehicle location: Bovenden, Doka, double bench seat, switch 5, power take-off, differential lock, work lights, rotating beacon, storage box, leaf suspension Wheelbase: 3700 mm Body: Schlingmann box body with roller shutters & Rosenbauer front pump FP 8/8 Body length approx. 2800mm! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fjdpfsvhka Eox Ag Tspp - .

Condition: used, mileage: 36,200 km, power: 66 kW (89.73 HP), first registration: 12/1988, fuel type: diesel, empty load weight: 3,850 kg, maximum load weight: 2,750 kg, overall weight: 6,600 kg, tire size: 8,5R17.5, axle configuration: 4x2, wheelbase: 3,100 mm, brakes: constant throttle, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, total length: 6,400 mm, total width: 2,420 mm, total height: 2,700 mm, Equipment: additional headlights, cabin, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 5, rotating beacon, storage box, leaf suspension Wheelbase: 3100 mm Body: Metz box body with roller shutters & front pump FP 8/8 Sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Fpedpfx Aovhiiljg Tep

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm Fsdpfsr D T U Djx Ag Tspp - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, mileage: 27,864 km, power: 96 kW (130.52 HP), first registration: 11/1978, fuel type: diesel, empty load weight: 4,490 kg, maximum load weight: 3,000 kg, overall weight: 7,490 kg, tire size: 8.25R16, axle configuration: 4x2, wheelbase: 3,300 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 5,850 mm, total width: 2,450 mm, total height: 2,650 mm, Equipment: cabin, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension Wheelbase: 3300 mm Superstructure: Fire-fighting vehicle with water tank from 1st ownership, TLF 8, pump FP 8/8, water tank 2240 liters, Ziegler superstructure, engine 6 cylinders OM 352, top speed 89 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Fpedsvhha Nopfx Ag Top

Condition: used, mileage: 27,864 km, power: 96 kW (130.52 HP), first registration: 11/1978, fuel type: diesel, empty load weight: 4,490 kg, maximum load weight: 3,000 kg, overall weight: 7,490 kg, tire size: 8.25R16, axle configuration: 4x2, wheelbase: 3,300 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 5,850 mm, total width: 2,450 mm, total height: 2,650 mm, Equipment: cabin, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension Wheelbase: 3300 mm Superstructure: TLF8 water tender with 2,240l water tank From 1st owner, FP 8/8 pump, Ziegler superstructure, 6-cylinder OM 352 engine, top speed 89 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Fpjdpfxjvhhf Ss Ag Tsp

Condition: used, empty load weight: 8,993 kg, maximum load weight: 33,007 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2020, next inspection (TÜV): 03/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 8,100 mm, color: white, Year of construction: 2020, mileage: 6,303 km, Equipment: ABS, Tomvekt: 8993kg, tillatt totalvekt: 42000kg, Lasterom (L B H): 13.403 mm x 2.490 mm x 2.700 mmdekkdimensjon: 385/65 R22.5, Lasteromsvolum: 90 m³, Foraksel: , 2. aksel: , 3. aksel: , Luftfjæring, Underkjøringshinder, Boggi, Elektronisk bremsesystem EBS, Dobbeldekk, Tilkoblingsplugg 1x15 og 2x7 pin, Anti-spray, SKO 24/L - 13.4 FP COOL DB V7Schmitz cooling unit, multi temp, 270 internal / 410 external height, 18t king pin, 8100mm wheebase. MOT/PKK 18.03.2026, Fodpfx Agoyr Uazo Tepp