Used Fps for sale (244)

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes Fpodpfx Agsh Sptne Tep X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: used, Year of construction: 2000, Pressure total: 400 ton Ram stroke: 200 mm Slide adjustment: 150 mm Shut height (stroke down, adjustment up): 700 mm Table surface area : 2.000 x 1.525 mm Slide area: 2.145 x 1.200 mm Free frontal opening L-R: 2.150 mm Free lateral opening F-B: 1.050 Number of strokes: 20 - 80 s.p.m. Main Motor: 78 kW Height over floor approx.: 5.000 mm Dimensions L x W x H: 4.810 x 2.830 x 5.770 mm Height below floor level: ca. 700 mm Oil volume: 185 l Weight of machine approx.: 51 ton Fpsdpfo Ai Htxex Ag Top Standard configuration DREHER Feeding Line - Year of Manufacture: 2000Decoiler - Type 2386 F MO FPS Max. coil weight: 8 t Strip width: max. 800 mm Coil outer diameter: 1,400 - 1,500 mm Spreading range: 475 - 530 Mandrel height above floor: 1,400–1,500 Mandrel spread: hydraulic Drive: hydraulic Straightening unit – Type 1691 E-RDS ZWL Strip width: 50–625 mm Material thickness: 1.2–5.0 mm Feed rollers: 2 Straightening rollers: 7 Straightening roller diameter: 100 mm Exit rollers: 2 Strip speed: 5–50 m/min. Material strength: 400 N/mm² Extended machine accessories Dynamic Drive with modified overhead drive systemHydraulic die clampsHydraulic die lifting rollersDie change consoles

Condition: ready for operation (used), Tool milling machine Deckel FP 2 / 3-axis digital display "NEW" / ORIGINAL CONDITION from a university -Travel ranges X/Y/Z 400x200x400mm -Table clamping surface 700x350mm Fodsztdl Iopfx Ag Topp -Speed range 40-2000 rpm -Feeds and rapid traverses in all three axes -Tool holder ISO 40 -Vertical / Horizontal milling attachment -Fixed swivel table -Coolant system -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Fodpfx Aozxwz Teg Tspp Free loading D - 88433 Schemmerhofen

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Fodpfjzx Ep Sjx Ag Tepp Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: used, mileage: 730,000 km, power: 368 kW (500.34 HP), first registration: 06/2014, fuel type: diesel, maximum load weight: 6,740 kg, overall weight: 18,000 kg, tire size: 265/70r19.5, axle configuration: 4x2, wheelbase: 5,100 mm, brakes: intarder, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: air, loading space length: 7,350 mm, loading space width: 2,550 mm, loading space height: 2,550 mm, Year of construction: 2014, Equipment: ABS, air conditioning, cable winch, car registration, compressor, cruise control, low noise, navigation system, onboard computer, parking heater, retarder, spoiler, tail-lift, traction control, IVECO STRALIS AS190S50/FP CM HI-WAY - Chassis WJMA1VUH60C287126 Foden Nxyqepfx Ag Topp YearEURO 6 Mechanics: Cursor 13 - 12,900 cc - 500 hp - km 730,000 approx. Transmission EUROTRONIC + RETARDER Bodywork: Exterior \ full cab color green Tires: STRUCTURE: 5100 mm wheelbase - Cab bed \ high roof Active Space HI- WAY version. Front and rear air suspension Total weight on the ground: 180 - Payload capacity: 67.40 TECHNICAL EQUIPMENT TRUCK: * to be verified upon arrival at our premises Cursor 13 engine - 500 hp - 12,900 Cc, Euro 6, Abs, Electronic Brake System, Brake Assist System, Iveconnect, Iveco Navigator, Differential Locking, Eurotronic 12as 2330 Td Transmission, Retarder Hydruaulic, Immobilizer, Automatic Climate Control, Independent Cabin Heater Ad Air, Adaptive Cruise Control, Hill Holder, Rear Suspension Pneumatic, Front Suspension Pneumatic, 790-Litre Increased Aluminum Fuel Tank, 135-Litre Blue Fuel Tank, Cabin Bed/High Roof - Hi-Way Active Space Version, Engine Brake With Retarder Function,Towable Version With Towing Bell, Power Steering, Electronic Speed Limiter, Central Locking, Alloy Wheels Alcoa, Electric Window Raiser, Portable Smoking Kit, Reclining High Comfort Sunbed, Sunroof Electrically Opening Glass Roof, Fog Lights, Removable Refrigerator, Electric Cabin Tilt, Pneumatic High Comfort Leather Driver Seat, Pneumatic and Heated Leather Passenger Seat, Electric And Heated Rearview Mirrors, Electric Front Blackout Curtain, Rolling Curtains On Doors, Matching Cabin Plastic Parts, Sun Visor EQUIPMENT: VAN - Useful interior dimensions approx. 7.35 * 2.50 h 2.55 HINGED TAILGATE Make: DAUTEL - Serial No.: 414219-001- Useful lifting capacity 20 Documents: Nationalized - Certificate of approval For viewing and road test contact Valerio Roscini at 339/3170008

Condition: new, Year of construction: 2026, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. Fedpfjh R S Tcsx Ag Tjpp EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. Fpodpfx Agoxfkm Aj Tep We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: used, mileage: 113,141 km, power: 177 kW (240.65 HP), first registration: 12/1995, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1995, total length: 7,400 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, +++ Extremely clean vehicle +++ Immediately ready for operation Water tank 1600 l, rear-mounted pump FP 16/8, mechanical lighting mast, Fodpjz Amnqjfx Ag Tspp All-wheel drive 4x4 with 2x differential locks, center and rear, ABS Tires completely renewed in 2025 (DOT 3424) Fresh inspection including lubrication and a new fuel filter as well as a new air dryer cartridge will be carried out (status as of today) The engine runs smoothly and the gearbox is easy to shift; the transfer trip was without problems. Maximum speed = 92 km/h according to the vehicle documents. +++ Errors, changes, and prior sale are subject to confirmation.

Condition: used, first registration: 10/2023, Schmitz Cargobull SKO 24/L - 13.4 FP COOL V7 Reefer Semi-Trailer Manufacturing date: 10/17/2023, Chassis No.: WSM000005317619 Refrigeration unit: Thermo King SLXi-400, Operating hours: [Diesel 5,825 h / Mains 50 h] Young 3-axle reefer trailer with double-deck system, pallet box, lift axle, temperature recorder, ATP and HACCP certificate, as well as rail and ferry equipment. Chassis hot-dip galvanized, body white. DIMENSIONS AND WEIGHTS - Internal body length: 13,403 mm, usable: 13,315 mm - Internal body width: 2,490 mm, external: 2,600 mm - Internal body height: 2,650 mm, usable: 2,550 mm - Rear door opening: 2,490 x 2,640 mm (W x H) - Overall height approx. 3,950 mm, loading height at the rear: 1,202 mm (unladen) - Fifth wheel height: 1,130 mm (unladen), wheelbase: 7,600 mm - Permissible total weight: 39,000 kg - Permissible unit load: 24,000 kg (technically 27,000 kg), fifth wheel load: 15,000 kg - Tare weight according to manufacturer: 8,073 kg (without refrigeration unit) REFRIGERATION AND TEMPERATURE CONTROL - Refrigeration unit: Thermo King SLXi-400 - Temperature recorder: Euroscan TX3 with printer according to EN 12830 - 2 temperature sensors for temperature recording - Plastic air duct under the roof (hose design with zipper) - Circulation wall approx. 1,750 mm high made of aluminum hollow profiles with pallet stop - Plastic fuel tank 245 l with 2 filling nozzles, biodiesel-compatible - Preparation for partition wall REFRIGERATED BOX BODY - FERROPLAST reefer box made of polyurethane rigid foam panels, thermally insulated and vapor-tight - Side walls: COOL 45, front wall, roof and doors insulated - Interior cladding made of plastic-coated sheet steel - Double-leaf rear door, insulated, stainless steel locking mechanism - Rear wall frame made of stainless steel, additional impact protection at the bottom - Aluminum baseboard profiles 300 mm on side walls, front wall and doors - Rubber door protection strips in full height - Interior lighting with door contact switch CARGO SECUREMENT AND DOUBLE DECK - Height-adjustable double-deck system for 11 x 3 Euro pallets with 22 aluminum support beams - Body certified according to DIN EN 12642 Code XL - LDS certificate (cargo securing) - Hole-slot cargo securing rails made of galvanized steel, embedded on both sides in the side walls - Additional anchor rail 680 mm above the floor FLOOR - Multifunctional floor, test load 5,500 kg, forklift axle load - Floor pan with 300 mm high aluminum baseboard profile - Floor recesses in the wheel arch area CHASSIS / AXLES / BRAKES - Galvanized-bolted chassis, 10-year warranty against rust-through - 3 x Schmitz ROTOS SCB 9 t axles, disc brake 430 mm - 1st axle can be lifted (starting aid) - SCB air suspension, lifting and lowering device with auto-reset - EBS 2S/2M with stability program (RSP) - Two-line pneumatic brake system with standard and Duomatic couplings - Hub odometer - Support jacks JOST, single-sided operation, low maintenance - Kingpin 2" replaceable - 2 wheel chocks with holder RAIL AND FERRY EQUIPMENT - Underrun protection 18 t bolted with sliding plate for rail and ferry loading - 4 pairs of ferry lashing points according to DIN/ISO 9367 with support block mounting ATTACHMENTS Fedo Aiyk Nspfx Ag Tspp - Pallet box for 36 Euro or 24 ISO pallets - Spare wheel carrier (basket) for 2 wheels - Plastic tool box with insert and drawer - Extendable folding ladder at the rear right - Dynamic Ramp Protection DRP 3.0, rubber ramp buffer and rear ram protection bar -

Condition: new, Year of construction: 2009, operating hours: 3 h, Cold Jet Aero 80 – Machine for professional use. This machine is suitable for industrial cleaning, including both small and very large projects. An advantage of this machine is that it does not contain the latest generation of electronics. It is one of the most robust machines on the market and is in excellent condition. Cold Jet Aero 80 FP – Dry Ice Blasting Machine, complete with the following equipment: COLD JET Aero 80 FP (3 hours of operation) 1 x 20’ blasting hose 1 x air hose 1 x Coldjet applicator 2 x nozzles We have various new parts in stock for Cold Jet machines. This is one of the best machines in the world. It contains no electronics, which is why it is reliable and not overly expensive to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold have a 1-year warranty. Repairs and maintenance of Cold Jet machines are available. Fodpoznnyxsfx Ag Tepp Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, mileage: 19,000 km, power: 100 kW (135.96 HP), first registration: 05/2000, overall weight: 7,495 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: mechanical, emission class: euro2, loading space width: 2,290 mm, loading space length: 2,870 mm, loading space height: 1,600 mm, Year of construction: 2000, total length: 6,430 mm, total width: 2,400 mm, total height: 2,960 mm, number of seats: 9, Equipment: ABS, parking heater, First owner. Small volunteer fire department; it will remain fully operational at the fire station until the new vehicle is delivered in the summer of 2026. Originally driven only just under 19,000 kilometers. The vehicle passed its technical inspection (TÜV) without any issues on September 1, 2026, and was immediately approved for continued use. Valid until 09/2027. Last service at 18,138 km, with "no defects found." Maintenance was always performed exclusively at the local Iveco/Fiat authorized workshop, and this was consistently done until recently. 9 seats. WEBASTO AirTop 32 S auxiliary heating system. Fire engine LF 8/6 with a MAGIRUS superstructure, manufactured in 2000. 600-liter water tank. Equipped with a tank heating system. Rear pump FP 8/8 with 118 operating hours. Lighting mast located between the superstructure and the cabin. 24-volt and compressed air connection on the driver's side step. Engine: Iveco 4-cylinder inline diesel engine with 3908 ccm, Euro 2 emission standard; it starts and runs perfectly. 6-speed manual transmission. Differential lock on the rear axle. Maximum speed of 86 km/h, according to the vehicle registration documents. Robust truck chassis with leaf spring suspension. Power steering. ABS and ASR (Anti-Slip Regulation). Radio. Electrically adjustable exterior mirrors. Unladen weight according to vehicle registration documents: 5035 kg. Permissible total weight: 7495 kg. Overall vehicle dimensions: Length: 6430 mm / Width 2400 mm / Height 2960 mm. The box body has a main compartment measuring approximately 2.87 m long / 2.29 m wide / 1.60 m high. Fpodszpgphepfx Ag Tep The roof is walkable, with a large storage box on the left side; the box lid is easy to open and close thanks to gas-filled struts. Interchangeable tow hitch with a 2000 kg braked trailer load or 1500 kg unbraked trailer load (ball and pintle hitch). Tires: MICHELIN with snow flake symbol, DOT code 2020. Size: 205/75R17.5. Condition: 6 tires are almost new. Batteries: 2x NEW in 2025. Prepared for digital radio communication. The special warning lights with front flashers are functional. The Martin horn has been removed and is no longer available. The fire engine has minor signs of wear and is generally well-maintained. The vehicle was handed over to us in a ready-to-use condition after being taken out of service. The Iveco with MAGIRUS-Weisweil superstructure is immediately available here. The necessary manuals with wiring diagrams and some documents are included; the service booklet was only filled out at the beginning, but all essential original documents from Iveco are available. There are 2 original Iveco vehicle keys that operate smoothly and identically in all 4 doors and also in the ignition lock. The compartment door locks and flaps are all easy to open and close. The Iveco has recently received several new parts. According to the mayor, this vehicle has not been involved in any accidents. The vehicle is explicitly offered here as an "operational vehicle." If the vehicle is not put back into service as an operational vehicle in the future, the special warning lights must be completely removed, and all vehicle markings must be removed. This offer is only valid for commercial enterprises and freelancers of all kinds, as well as for authorities and emergency services (BOS) of all kinds. Sales to purely private end consumers are excluded. Subject to prior sale and erroneous information. The offer is subject to §25

Condition: used, mileage: 22,000 km, power: 162 kW (220.26 HP), first registration: 10/2002, overall weight: 14,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro3, loading space width: 2,460 mm, loading space length: 4,000 mm, loading space height: 2,500 mm, Year of construction: 2002, total length: 8,400 mm, total width: 2,500 mm, total height: 3,450 mm, Equipment: ABS, all wheel drive, First owner. 22,000 total kilometers with original inspection certificate. First owner: Voluntary German fire department. Always registered until November 2026. Euro 3 diesel engine, MAN inline six-cylinder, 6871 ccm. 6-speed manual transmission. 96 km/h. All-wheel drive with 2 differential locks (front and rear). ABS. Fire engine LF 16/12 with modern body. Year of manufacture 2002. Integrated ambient lighting. Wide crew cab METZ-AS (combined steel and aluminum construction, Metz-FGL, now Rosenbauer). 9 seats. Hydraulically tilting spacious cab with 4 doors. 1900 liter water tank. With electric tank heater. Rear pump Rosenbauer FP 16/8 (only 118 operating hours). TS extension with 220 kg load capacity on the front right, further storage and pull-out units according to standard, quick-attack system with dimensionally stable hose. Traffic warning system Boese TriBlitz 3 (can be switched on directly by the driver). Light mast GEROH with 2 spotlights, mounted between cab and crew cab. Small ball-type trailer hitch with 2000 kg trailer load (braked) or 1500 kg (unbraked). Connections for 12 V and 24 V. Robust chassis with full leaf spring suspension and approximately 3.85 m wheelbase. A parking heater was previously installed, but it has been removed. The WEBASTO sticker is still on the vehicle. Retractable hose reels from ZIEGLER, both included in the offer, with hose material. Total vehicle length with the 2 reels = 8400 mm. Vehicle overall external dimensions (dimensions without reels!): Length 7.70 m / Width 2.50 m / Height 3.45 m. Unladen weight: 8395 kg. Permissible total weight: 14000 kg. The pure box/fire engine body has the external dimensions approximately 4.00 m long / 2.46 m wide / 2.50 m high. Complete special signaling system with roof beacon and front flashers, operational, can remain for emergency services. The registration type is currently "Other motor vehicle, fire engine LF 16/12". This fire engine has valid inspections. TÜV (technical inspection) until 02/2027 and SP (gas inspection) until 02/2028. Fjdpfx As Aix Tcjg Tjpp Both inspections were carried out "without any defects found" and recently (the gas inspection was performed at 21,813 km). Original EC declarations of conformity are available for the body (Metz-FGL) and the light mast (GEROH). 2 original MAN keys are included, suitable for all doors. A radio, original MAN, is also installed. The diesel tank holds 125 liters. This fire engine was driven to us without any problems on the highway for a good 400 km in November 2026. The MAN is immediately available. This offer is only valid for commercial businesses and freelancers, as well as for authorities/emergency services of all kinds. Sale to private end consumers is unfortunately not possible. Subject to prior sale and errors. The purchase price is the final price, gross = net, without separate VAT (sale according to §25a UStG / so-called differential taxation).

Condition: ready for operation (used), Universal milling machine / DECKEL FP 33 including Heidenhain digital display & accessories - COMPLETE TECHNICAL DATA – SEE PHOTO - Heidenhain digital display Fpodpfx Agsz N S U Uj Tsp - Various accessories - Documentation - Crane Dimensions: L x W x H 2.5 x 2 x 2 meters / Weight 5000 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Fjdpfx Ae Aa Ikrjg Tspp Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: used, Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction via this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: Universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 Fpsdpfegyw S Tex Ag Tep   You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), mileage: 497,122 km, power: 265 kW (360.30 HP), first registration: 10/2009, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,750 mm, fuel: diesel, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 8,440 mm, total width: 2,530 mm, Equipment: crane, = Additional options and accessories = - PTO = More information = General information Year of construction: 2009 Fpodpfx Aozucqfeg Tjp Registration number: BX-FP-67 Technical information Number of cylinders: 6 Engine capacity: 12.740 cc Axle configuration Front axle 1: Tyre profile left: 30%; Tyre profile right: 30% Front axle 2: Tyre profile left: 30%; Tyre profile right: 30% Rear axle 1: Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 17.230 kg Carrying capacity: 19.770 kg GVW: 37.000 kg Functional Crane: HMF 1643-Z2, behind the cab Condition Technical condition: good Visual appearance: good Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: ready for operation (used), DECKEL FP 2LB, including a 3-axis digital display, from a university, in well-maintained original condition. - 3-axis digital display "ACURITE" - Travel distances X/Y/Z: 795x300x400mm - Automatic feeds (18 speeds) / rapid traverses in all 3 axes - Spindle speed range: 40 - 2000 RPM (18 speed levels) - Vertical/horizontal milling capability - Swiveling vertical head with drilling quill - ISO 40 tool holder Fpedpjzbi I Eefx Ag Tsp - Table surface (angular table): 1000x440mm - Table clamping surface with additional table: 1000x770mm - Coolant system - Various tool holders - Machine light - Documentation Dimensions: L x W x H: 2.5 x 2.4 x 1.8 meters / Weight: 2200 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). Fedpjz Hyyfefx Ag Tspp The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. A manual compiled from Deckel descriptions is also included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, MBO K 760-6 S KTL - age 2006 Pallet feeder FP 95 Delivery SBAP 46 ME 6 pockets - 2 knifes. 1 extra MBO knife unit Z-FW ( for 32 page production) Complete with all accessories , pumps , books tools. in god working condition. Fpedpfx Ags Ah D D Do Tep Available Immediately Price under request. More pictures are available.

Condition: used, Universal tool and cutter grinding machine DECKEL, Type FP 3 Serial No. 2201 - 5240, Year of manufacture 1981 Control system Type 2201, Serial No. 5594 Travel distances: X: 500 mm, Y: 300 mm, Z: 380 mm (manual adjustment and without bellows) Travel distances: X: 490 mm, Y: 290 mm, Z: 340 mm (with feed) Table size: 800 x 420 mm Spindle mount: SK 40 - S20x2 Tailstock travel: 100 mm Spindle speed: 25 - 2500 rpm, 18 steps Feed rate: Feed 5 to 500 mm/min. Rapid traverse speed: approx. 1200 mm/min. Motor power, spindle drive: 2/4 kW, pole-switching Power connection: 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN Type TNC 111 - Stepless feed in the X, Y and Z axes - Mechanical handwheels for all three axes - Spindle speed via 2 motor speeds and 18 gear stages - Vertical milling head, swiveling and extendable 200 mm horizontally - Fixed angular table 800 x 420 mm - Coolant system with mechanical pump in the machine base - Central lubrication - Control cabinet located beside the machine - Protective enclosure with hinged doors around the machine table - Original chip tray for attachment to the machine base Space requirement L x W x H: 1600 x 1600 x 1750 mm Fsdpfx Ago Ahzl Ds Tspp Weight: 1400 kg Good condition

Condition: used, first registration: 10/2023, Equipment: ABS, Schmitz Cargobull SKO 24/L - 13.4 FP COOL V7 Refrigerated Box Semi-Trailer Date of manufacture: 10/17/2023, Chassis No. WSM000005317617 Refrigeration unit: Thermo King SLXi-400 Operating hours: [Diesel 5,497 h / Electric 51 h] Young 3-axle refrigerated trailer with a double-deck system, pallet box, lift axle, temperature recorder, ATP and HACCP certificate, as well as railway and ferry equipment. Chassis hot-dip galvanized, body white. DIMENSIONS AND WEIGHTS - Internal body length 13.403 mm, usable 13.315 mm - Internal body width 2.490 mm, external 2.600 mm - Internal body height 2.650 mm, usable 2.550 mm - Rear door opening 2.490 x 2.640 mm (W x H) - Overall height approx. 3.950 mm, loading height at the rear 1.202 mm (unladen) - Coupling height 1.130 mm (unladen), wheelbase 7.600 mm - Perm. total weight 39,000 kg - Perm. unit weight 24,000 kg (technically 27,000 kg), drawbar load 15,000 kg - Unladen weight according to manufacturer 8,073 kg (without refrigeration unit) REFRIGERATION AND TEMPERATURE CONTROL - Refrigeration unit Thermo King SLXi-400 - Temperature recorder Euroscan TX3 with printer according to EN 12830 - 2 temperature sensors for temperature recording - Plastic air duct under the roof (hose design with zipper) - Circulation wall approx. 1,750 mm high made of aluminum hollow profiles with pallet stop - Plastic fuel tank 245 l with 2 filler necks, suitable for biodiesel - Preparation for partition wall BOX BODY Fpodps Aiykzofx Ag Top - FERROPLAST refrigerated box made of polyurethane rigid foam panels, thermally efficient and vapor-tight - Side walls COOL 45, front wall, roof and doors insulated - Internal lining made of plastic-coated sheet metal - Double-leaf rear door insulated, stainless steel locking mechanism - Rear wall frame made of stainless steel, additional impact protection at the bottom across - Aluminum baseboard trim 300 mm on side walls, front wall and doors - Rubber door protection strips in full height - Interior lighting with door contact switch CARGO SECUREMENT AND DOUBLE-DECK SYSTEM - Height-adjustable double-deck system for 11 x 3 Euro pallets with 22 aluminum load beams - Body certified according to DIN EN 12642 Code XL - LDS certificate (cargo securing) - Perforated slot cargo securing rails made of galvanized steel, embedded on both sides in the side walls - Additional anchor rail 680 mm above the floor FLOOR - Multifunction floor, test load 5,500 kg, forklift axle load - Floor pan with 300 mm high aluminum baseboard trim - Floor recesses in the wheel arch area CHASSIS / AXLES / BRAKES - Galvanized-bolted chassis, 10-year warranty against rust-through - 3 x Schmitz ROTOS SCB 9 t axles, disc brake 430 mm - 1st axle liftable (starting aid) - SCB air suspension, lifting and lowering device with auto-reset - EBS 2S/2M with stability program (RSP) - Two-line compressed air brake system with standard and Duomatic couplings - Hub odometer - Support winch JOST, single-handed operation, low maintenance - 2" kingpin replaceable - 2 wheel chocks with holder RAILWAY AND FERRY EQUIPMENT - Underrun protection 18 t bolted with sliding plate for railway and ferry loading - 4 pairs of ferry lashing points according to DIN/ISO 9367 with support bracket ATTACHED COMPONENTS - Pallet box for 36 Euro or 24 ISO pallets - Spare wheel holder (basket) for 2 wheels - Plastic toolbox with insert and drawer - Extendable folding ladder at the rear right - Dynamic Ramp Protection DRP 3.0, rubber ramp buffer and ramp guard at the rear - Later

Condition: used, mileage: 410,000 km, power: 169 kW (229.78 HP), first registration: 12/2000, fuel type: diesel, overall weight: 15,500 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, Year of construction: 2000, Equipment: ABS, Manufacturer Mercedes Model Atego 1523 4x2 Slamsuger Year 2000 Condition Good Serial Number WDB9702731K551246 Ref. nr. 618034 Reg. date: 29-12-2000 Hk: 230 Km: 410000 Gearbox: Manual Eurotype: 2 Diesel tank: 1 Tank liter: 200 L Radio: ? Disc brake: ? ABS: ? Tire Size: 285/70R19,5 Cover% left 80% 50% Front suspension: Springs Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 15500 Kg Net weight: 5900 Kg Load capacity 9600 Kg Manufacturer: FP Production Tank capacity: 6000 L High pressure pump: Pralissoli High pressure capacity: 120 bar - 122 l/min Vacuum pump: Jurup PR 150 (2017) Vacuum capacity: 900 m9/h Fpjdpfx Agex Iy H Hj Tep

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 2,500 kg, Fork positioner ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2013, ISO 2B (41 cm), capacity 2500 kg, opening range 340-990 mm, width 1050 mm, sideshift ID OS1978. Fedpfx Aezigt Tsg Tjpp

Year of construction: 2006, condition: ready for operation (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,100 mm, overall weight: 80,000 kg, spindle motor power: 40,000 W, spindle speed (max.): 3,000 rpm, table load: 30,000 kg, number of axes: 5, This 5-axis Zayer FP-10000 Bed Type Milling Machine was manufactured in 2006. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 4,200 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 10,000 × 3,000 mm and a maximum table load of 30,000 kg. If you are looking to get high-quality milling capabilities, consider the Zayer FP-10000 machine we have for sale. Contact us for further details. • Table size: 10,000 × 3,000 mm • Distance between columns: 3,500 mm • Table-to-direct-output-head nose distance: 2,000 mm • Table-to-45° head nose distance: 1,298 mm • Rapid traverse X/Y/Z: 10,000 mm/min • Working feed X/Y/Z: 6,000 mm/min • Universal 45° head speed: 3,000 rpm • Direct-output head speed: 3,000 rpm • Automatic TWIST head speed: 3,000 rpm • Speed ranges: 2 Fjdpfxjz D Az Te Ag Tspp • Number of heads: 3 • Hydraulic tool clamping: Included • Manual head change: Included • Portable handwheel: HR-410 • Motors: Siemens • Machine condition: Excellent Additional equipment • Universal 45° head, 3,000 rpm • Automatic spherical head • Continuous rotation in both bodies • Manual retractable support on the right side Technical Specification Taper Size ISO 50