Used Forming for sale (2,424)

Year of construction: 2025, condition: new, Vertical packaging machinee for quad sealeded bags and with a rectangular base. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min; bag sizes: L(150-350), front width: (60-190)mm, side width: (40-100)mm, (double film pulling possible for longer bags); suitable film width: 240-520mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 6kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.3m³/min; dimensions (LxWxH): 2020*1440*2130mm; weight: 780kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fgodpfx Ajv Nngrod Nei

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Fgjdpfjq Ul Rvox Ad Nji Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Condition: new, Year of construction: 2025, total length: 600 mm, total width: 600 mm, total height: 1,400 mm, warranty duration: 12 months, overall weight: 300 kg, input voltage: 400 V, power: 1.5 kW (2.04 HP), pressure: 9.8 bar, tank capacity: 50 l, RK50U — universal casing-free forming system for meat sticks, jerky & sausage production HydroShpriz RK50U is a powerful piston-driven filling and forming machine engineered for small and mid-size manufacturers starting production of meat sticks, salami snacks, pet food, kibbeh, fruit bars, and more. Ideal for dry-cured snacks without alginate casing. Strong, compact, and easy to operate — it’s the perfect choice to start your line and grow with Trade-In options. ⸻ Technical specifications • Drive: hydraulic piston • Piston force: 94 kN • Power: 1.5 kW, 380 V, 50 Hz • External dimensions: 1050×550×950 mm • Weight: approx. 300 kg • Material: full stainless steel, food-grade • Certification: CE certified, built for continuous 8-hour production cycles ⸻ Configuration & possibilities • Gearbox-driven filler for thick and sticky emulsions down to –2 °C • Multi-nozzle head: up to 25 lanes simultaneously • Round nozzle set: 8 mm to 22 mm for meat or fish sticks • Flat nozzle set: 25 mm to 200 mm width, 3–5 mm height — ideal for jerky/strips • Sausage stuffing set: for traditional casing sausages • Overhead tray holder: for direct forming onto drying racks • Trolley integration: fits perfectly with our 30-row drying racks (60 trays) • Integrated time-based portioning unit with ±8% accuracy • 24V remote signal: compatible with automatic clippers (PolyClip, Compa, etc.) • Optional vacuum connection: for better product density and shelf-life ⸻ Production capacity • From 20 kg to 1,600 kg per 8 hours depending on product shape, tray format and nozzle type ⸻ Availability Fgodpfx Asmrpvysd Nei ✔️ In stock at official distributors in: • Austria • Poland • United Kingdom • Lithuania • Australia • South Africa • United States Delivery worldwide. Training, test batch, and spare parts included. ⸻ Made in Ukraine. CE sertified

Condition: ready for operation (used), BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 2000 mm weight: 700 kg Fedpfx Adjwrt T Uj Negi

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system Fedpfxsr Axlve Ad Negi 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Fgsdpohrakvefx Ad Nei Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: excellent (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: Typ BM600 Nr. BM600210, BM600 with TSK beading function, BM600 table insert for arcs, standard 80 mm Consisting of: 1 table insert plate, 1 passive bearing housing with bearings and spacer rings, 1 set of working rollers for pipe diameter 80 mm, 5 mm wide, 1 set of gears 20Z/20Z for 80 mm roller set, 1 wear insert for passive bearing housing, 1 M12 left-hand thread screw 12.9, 1 felt seal for bearing, 1 tension washer, 2 magnetic bases, BM600 clamp insert table. The machine is in absolutely like-new condition, original price €31,916, offered at half price! Fodpfx Ajw Rynbed Njgi

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, The hose bag packaging machine shown in the picture is for sale. It can pack liquids, sauces, or dry goods. It also has a vacuum function, and gas flush function. Carrying handle design. With a vacuum pump and a conveyor belt. Ceqfu792Uk The diameter of the tube is about 23 cm, the length of the package can be adjusted in the program. We used it to make 1-2 kg packages, but it is good from 0.5 kg to 4 kg. The machine is about 5 years old but we used it for 1 month. Quality Chinese made. Fedpfx Adju S Hfms Nsgi Top Y Machinery TOPY-VP520 VFFS Packing Machine Can be viewed and tried in Székesfehérvár. The price shown is without tax.

Condition: new, Year of construction: 2025, The FARS200 robotic system features: • A dual-level conveyor module for tray feeding and return • A tray loading unit designed to work with custom 30-row trolleys holding 60 trays (900×500 mm) • A flexible forming block for two product types: • Cylindrical sticks: 8–14 mm diameter • Flat jerky strips: 25–200 mm width • A vacuum gear filler, made in-house by HyShpriz with a 200-liter hopper (Compatible also with your existing Handtmann or REX fillers) ⸻ Scope of Supply – Complete FARS200 System Includes: • Gear-Driven Vacuum Filler 200-liter hopper with auger for thick meat or fish mixtures Stainless steel food-grade construction • Hydraulic BIN Loader Handles up to 250 kg. Enables continuous loading into the hopper without stopping production • Forming & Cutting Module • Up to 24 simultaneous forming nozzles • Pneumatic guillotine cutter with integrated cleaning system • Quick-switch forming heads for stick or strip formats • Servo-Controlled Dual-Level Conveyor • 3-meter belt • Speed-adjustable • Handles filled and empty trays across two tiers • Robotic Tray Handling Unit • Automatically picks, places, and returns trays • Coordinates with the conveyor’s upper/lower levels • Rotating Trolley Platform • Holds 1 trolley with 30 rows × 2 trays each (60 trays total) • Pneumatic locking and automatic rotation after filling • Drying Trolleys & Trays • 4 stainless-steel trolleys included • 60 Teflon-coated trays (900×500 mm) • Compatible with existing drying or smoking chambers • LCD Touchscreen Control Panel • Intuitive multilingual UI • Programmable stick length (90–900 mm) and forming recipes • Production stats and diagnostics Fodpfjrftxfjx Ad Nsgi ⸻ Performance & Product Flexibility • Output: 200 kg/hour • Formats: casing-free mini salami sticks, jerky strips, pet snacks • No natural or alginate casing required • Ideal for: • Slow drying: 30–35°C for 12–18 hours • Thermal drying: 60°C for ~5 hours • Compatible with flow-pack packaging (MAP) and vacuum sealing

Condition: good (used), Year of construction: 2005, functionality: fully functional, Machine was used to pack potato chips at Sibell in France. It can come with Safeline drop through metal detector and Markem X65 coder and MBP 14-head weigher from 2006. Bagger and weigher were used together before. Fodsr Hdimopfx Ad Nogi It can come with three sizes of forming shoulders: 80,110 and 160 mm. One is included in the offered price.

Condition: good (used), Year of construction: 2002, Rondo Laminating and Shaping Line for Yeast Pastries - Smartline and Compactline model - used - year of manufacture: 2002 Fgjdpfx Adew Nx S No Nsi - length: 15 meters - without tools - components: satellite calibrator, dough rolling cylinder, standard calibrator, work table, cutting station, guillotine, discharge table - machine in production - collection from warehouse / shipping option - price on request

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz Fedpfoh Uhqyox Ad Negi - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Roll Forming Line for Drywall and Zinc-Coated Door Frame Profiles General Description: Complete roll forming line designed for the production of zinc-coated steel profiles used in drywall structures and door frame systems. The machine processes galvanized steel strips with thicknesses typically ranging from 0.6 mm to 1.0 mm, featuring quick roller adjustment depending on the required profile type. Profiles Produced - Drywall Profiles: • Galvanized Tracks: width 57 mm and 77 mm, height 35 mm, sheet thickness 0.6 mm • Galvanized Studs: 39×55 mm and 39×75 mm, sheet thickness 0.6 mm • U-Shaped Profiles for False Ceilings: 27×60×27 mm, sheet thickness 0.6 mm • Offset Profiles for False Ceilings: 20×29×28 mm, sheet thickness 0.6 mm - Zinc-Coated Door Frame Profiles (10/10 mm): • Complete range from ART. 201 to ART. 217, including L, U, Z and special shapes • Variable dimensions: widths from 20 to 46 mm, heights from 15 to 31 mm, customizable configurations available Technical Features • Material thickness: 0.6 – 1.2 mm • Strip width: variable, depending on profile • Number of forming stations: 19 • Rollers: hardened and ground steel rollers • Drive system: independent motorization for each roller group Fgedpfexnmyqjx Ad Noi • Feeding speed: adjustable • Cutting unit: automatic flying shear or saw • Optional units: punching, slotting, or quick-change tooling systems

Condition: like new (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total width: 160 mm, total length: 12,600 mm, overall weight: 4,300 kg, Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 78 cm (box type as per attached tables) - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 250-650 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - 4 adhesive application stations (2 front and 2 back). - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - The first pre-loading unit can be adjusted to 180°. The second and fourth folding unit are adjustable to 180°. The third bending unit is at 135°. - Cold glue tank for soldering with metering wheel. - Two additional and movable glue tanks placed on top for automatic production of the box base. (The stations can be easily coupled or uncoupled). - Prefabricated folded and glued boxes are transported to an adjustable pressing station and then to disposal. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 12.600 x 1.500 x 1.400 mm - Weight: 4.300 kg Fedjmcw Tdspfx Ad Njgi Price EXW negociable - 59.000 euro + VAT (without VAT in EU)

Condition: new, Year of construction: 2025, JOINT FORMING MACHINE Fsdpfxsbyhnie Ad Nsgi Model; MAGRAF UH-50 -maximum width; 500mm -speed opretaion; up to 5 units per hour -input power:0,37 kW

Condition: good (used), Year of construction: 2004, Innotech continous vertical form-, fill- and seal machine, type: 3800 RS, machine number: 13704539, year of construction: 2004, 230-400 V, 3 Ph, 25 A, weight: 1000 kg, vertical seal: 380 mm, horizontal seal: 400 mm, total dimensions: 2550 mm x 1500 mm x 1450 mm. Including 4 filling pipes. With Videojet coder. Fgodpfstq Ulmex Ad Noi Up to 220 bags per min

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight Fgjdokvmi Sepfx Ad Noi 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, BRICK PRODUCTION MACHINERY 1. Feeder 2. Rubber conveyor belt 3. External stone crusher Fgodpfjxuu Dqsx Ad Nsi 4. Rubber conveyor belt 5. Morando mixer 6. Rubber conveyor belt 7. Bongianni mollazza (clay mixer) 8. Four rubber conveyor belts 9. Bedeski mixer 10. Two rubber conveyor belts 11. Feeder 12. Metal conveyor belt 13. Morando grinder 1000x800 14. Grinder rectifier 15. Dust extraction system with air ducts 16. Two conveyor belts 17. Vacuum pump for press 18. Morando Universal 475C press 19. Ipiac Putin cutter 20. Automation – packaging system 21. Wagon pusher 22. Automation for transfer to storage line and kiln entry 23. Complete kiln with burners, fans, and pumps 24. Automation for wagon transfer at kiln exit 25. Overhead crane – de-palletizer – palletizing with stretch film All of the above are equipped with electric motors and electric panels which will need inspection and possibly new control programs due to many years of non-use. Production capacity: 250–350 tons per 8-hour shift (depending on product size and length). Capable of 3-shift operation.

Condition: used, Guard Rail Roll Forming Line: Fgodpfxsxnmmqj Ad Noi • The production line for road safety barriers consists of: • Accessories and rollers for the production of 2- and 3-wave guard rails • Bending machine for 2- and 3-wave profiles • 19-station roll forming machine, complete with rollers and motorization • No. 3 punching stations • No. 1 cutting station • No. 7 hydraulic power units • No. 1 station with feeding rollers

Condition: excellent (used), Max. external diameter: 75 mm Hydraulic pressure: 102 bar Safety pressure: 120 bar Tank capacity: 76 L CE standards Dimensions: 2200 × 830 × 1350 mm Fgedpfow U Awaox Ad Nji Weight: 1300 kg

Condition: used, Year of construction: 2003, Machine designed to transform a PVC-free film into a finished, filled, sealed and printed infusion bags for injectable solutions, in sizes from 50 ml up to 5000 ml. Uses PVC-Free films. Meets the specifications outlined in current pharmaceutical regulations, the machine is designed and manufactured with materials in accordance with CGMP and FDA standards. Fjdpfxjxdzx Tj Ad Njgi

Condition: refurbished (used), Year of construction: 2000, Innotech bagger. Doing 15 kg bags. Currently doing a bag with a film width 940 mm. Max film width 1.3 m wide. Max 1.8 m wide. 2.4 m deep. type: REVO 6000 from 2000, , 230/400 V, 50 Hz, film width: 950 mm, dimensions form: 160 mm x 300 mm, horizontal seal length: (2x) 620 mm, vertical seal length: (1x) 600 mm, total dimensions: 2100 mm x 2700 mm x 2400 mm. Fgedpfjpz I Raex Ad Noi

Condition: ready for operation (used), Year of construction: 2009, Roll width: 500mm, bag dimensions X/Y: 250mm/159mm, packaging capacity: 2 bags/cycle, filling weight range: 200g-250g, cycles: 50, control: Siemens Simatic S7-300, machine dimensions X/Y/Z: approx. 5800mm/2000mm/2300mm. Documentation available. On-site inspection is possible. Fodevtqrropfx Ad Negi

Condition: good (used), Rose Forgrove flow pack wrapper model 305. Peg and chain distance between infeed 300 mm. Infeed height 3.2 m. S/s contact parts. No product no bag. PEC. Flash labelling. Jaw size 400 mm wide rotary. Overall length 5.7 m. Touch screen control. 1.3 m wide. Fixed box 110 mm wide. With an additional fixed box. Fedjr Hdg Ispfx Ad Negi

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Fgodpfxsu Rc R Se Ad Noi