Used Firewood Requests for sale (12,657)

Condition: used, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. By means of these cyclic loads and the accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the carriage All-round grids in the carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 %, 50 Hz Nominal power: 30 kW Nominal current: 50 A Refrigerant: R-404a /R-23 Refrigeration unit: Water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 Guedpfx Aswbdv Secmji You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Vötsch VTSR 7034/S Climate Testing Chamber -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber volume: 335 liters Gujdpfx Aceuuif Nemji Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Year of manufacture: 2002 TK-11 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Lockable storage unit for valuable materials This item is a storage unit for valuable materials. The unit is equipped with a lowering gate as a locking mechanism, providing secure protection for valuable goods. Dimensions: 4.25 meters wide, 1.35 meters deep, and 2.85 meters high. Gsdpfx Ajh I D Auocmeui Manufacturer of locking device: Warema Condition: used Complete factory clearance sale, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more items – both new and used – in our shop! International shipping costs available upon request!

Condition: used, Mathis THN 10988 Laboratory Thermosoling System Application: This combination of a padding machine and a dryer has proven to be extremely effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Dryer THN If all the aforementioned applications are to be ensured and the use of frame racks is also desired when the dryer is operated independently, the THN type is preferable. The standard frame racks are suitable for a sample size of max. 50 x 50 cm (larger frame racks are available upon request). If all the above-mentioned application possibilities are to be ensured and the use of frame racks is also desired for the stand-alone operation of the dryer, the THN model is preferable. The standard frame racks are suitable for samples up to a size of 50 x 50 cm (larger frame racks are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, mesh fabrics, non-woven fabrics, etc., as well as clamping frames for foils and paper are available. Drying chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the dryer. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle compartment. A control flap allows the ventilation to be regulated evenly from above and below or the airflow from above or below. Fan and heater A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating capacity, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance and increases the operational safety of the dryer. The heating capacity is designed for rapid heating and is automatically reduced after the desired temperature is reached in order to avoid unnecessary power surges. The temperature is controlled electronically in the range of 20–250 °C. Fresh air is directed directly into the recirculating air fan via a fan. The desired airflow can be adjusted using a step switch. Technical data Air speed approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Heating capacity approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Guedpfxou D Aris Acmoi Dimensions (L x W x H): 4800 x 1380 x 1750 mm Purchase price: €86,275 You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: used, KUKA KR 210 L150-2 2000: 6-Axis Robot Guedpfx Aszcwxuocmoi The KUKA KR 210 L150-2 2000 (Series 2000) is a powerful 6-axis industrial robot specifically designed for extended reach with a high payload capacity. The abbreviation "L150" indicates the arm extension (long version), which increases the maximum reach to 3,100 mm, while the nominal payload is 150 kg. Key technical data: Maximum reach: 3,100 mm Nominal payload: 150 kg Additional load (arm/wrist): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Self-weight (without controller): approx. 1,285 kg Protection class: IP65 (standard) Mounting position: Floor Axis data (range of motion & speed) The Series 2000 is characterized by high-torque drives that ensure high dynamics despite the large arm extension: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): +65° to -209° | Max. speed: 81°/s Axis 4 (A4): ±350° | Max. speed: 100°/s Axis 5 (A5): ±125° | Max. speed: 110°/s Axis 6 (A6): ±350° | Max. speed: 184°/s Typical applications Due to its large workspace and payload capacity, the manipulator is ideally suited for: Material handling and palletizing tasks over long distances. Milling applications and mechanical machining (e.g., deburring of components). Spot welding and handling in automotive production. Additive manufacturing and large-part 3D printing. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Mikron WF 32 CH Universal Milling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 control system Technical Data Manufacturer: Mikron Type: WF 32 CH Control System: Heidenhain TNC355 Travel ranges: X 560 mm, Y 500 mm, Z 400 mm Clamping area: 530 x 900 mm Rapid traverse rates: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Gujdpswit Rhsfx Acmsi Heidenhain TNC355 Operating Manual Heidenhain TNC355 Programming Examples Heidenhain TNC 355 Service Manual You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller Gusdpfewxv Hksx Acmei From simple start-up procedures to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every fastening process. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Memory capacity: Between 2,500 and 8,500 fastening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies: – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Prevailing torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), mileage: 217 km, first registration: 06/2024, fuel type: diesel, axle configuration: 8x2, wheelbase: 4,570 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, retarder, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Particulate filter - Reversing camera - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Xenon lighting - PTO (Power Take-Off) - Towing jaw = Further Information = Transmission: OPTICRUISE GEARBOX, automatic Front axle 1: Steered Front axle 2: Steered Rear axle 1: Twin tires Rear axle 2: Lift axle; steered Number of cylinders: 6 Technical condition: very good Visual condition: very good Price: On request NEW SCANIA R540 NGS 8X2 CHASSIS CAB UNUSED EURO 6 L PACKAGE 540 HP DRIVE 8X2 LAST AXLE LIFTABLE AND STEERABLE WHEELBASE 457 CM FULL AIR SUSPENSION CR20H SLEEPER CAB WITH FULL EQUIPMENT AIR CONDITIONING, AUXILIARY HEATER, NAVIGATION, LEATHER, FRIDGE, CAMERA OPTICRUISE AUTOMATIC GEARBOX WITH RETARDER ACC LANE AND SIDE ASSIST TRAILER COUPLING PTO XENON CHASSIS LENGTH 673 CM THIS TRUCK IS FULLY OPTIONED, BRAND NEW AND UNUSED ONLY 248 KM!!! 4X IN STOCK!!! Godpfx Asuxwxgocmeui FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO WATCH OUR VIDEOS OF TRUCKS, COMMERCIAL VEHICLES, AND MACHINERY FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, Venjakob RNV 2.0 Exhaust Gas Purification System The system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Gujdpfezrl Ibox Acmji Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Combustion (Oxidation): In the combustion chamber, the natural gas supply (the auxiliary burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely decompose into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy recovery: The purified, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, very little additional gas needs to be supplied. System data Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of manufacture: 2019 Manufacturing number: 15212 Throughput volume: 2,000 Nm³/h Gas & Combustion Gas type / heating value: Natural gas H / 10.4 kWh/Nm³ Firing heat output range: 30 kW Flow pressure: 200 - 1,500 dPa Max. combustion chamber temperature: 850 °C Electrical connections Mains connection: 400 / 230 V AC Connected load: 24 kVA Current consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Angle sealing machine with shrink tunnel For sale is a professional, semi-automatic angle sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. It is ideal for quickly and professionally shrink-wrapping cardboard boxes, books, bottles, textiles, or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The angle sealer works with a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculation system with adjustable air deflectors. This ensures a completely even heat distribution and a perfectly smooth shrinking result – even with demanding product geometries. Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar, and tunnel temperature to be adjusted precisely to the film thickness used (PO, PE, or PVC). Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid conveyor belt. It reliably transports even heavy packaged goods (e.g., printed materials, canned goods, or wooden parts). Ergonomic infeed table: The separate, mobile preparation table allows for quick and easy threading of products into the half-tube film. The film unwinding is smooth and easy thanks to the ball-bearing system. Perfectly suited for printing companies, logistics centers, laundries, or contract packers for shrink-wrapping: - Cardboard boxes and multi-packs - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle carriers and cans Gusdpsz Dtf Aefx Acmoi Technical data & features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Angle sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid conveyor belt in the shrink tunnel Mains voltage: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design, in the tunnel opening) Net weight: approx. 400 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, FOBA DP 15 Laser Marking System The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focus of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics with the "all-round laser." The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideally suited for metals and a wide range of plastics. Gsdew U T Ebjpfx Acmsui The technology enables permanent, easily readable, and precise marking. Functionality: The laser beam creates a focused light spot that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing marking: A color change of the material through heating. Color change: Creation of a color contrast on the material. Material removal: Removal of material to create a recess. Details: Device: FOBA DP 15 Laser Marking System Laser type: Fiber laser Wavelength: 1064 nm Focal length (f): 254 mm (equivalent to 10 inches) You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Osai Neomark 400 Nd-YAG Laser Marking Machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various card types up to a side length of 320 mm. The user interface consists of a console with a separate keyboard for controlling the laser source, the control systems, the marking systems, and the automation responsible for card movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to collect the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2 % Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Gusdsxbck Eopfx Acmsi Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling renewed More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Haas-Laser HL 1203D Optical system: 22-31-21-BX Laser class 4 1500 W 1064 nm You can find more new and used items in our shop! Gsdpfx Aoxam Ryocmoui International shipping costs available upon request!

Condition: used, Emhart TUCKER ETF50R.00.54/12.5.13-25BM Bolt Welding Machine Technical Details: - Manufacturer: Emhart Teknologies (TUCKER GmbH) - Model / Type: ETF50R.00.54/12.5.13-25BM - Article Number: T045 006/400 - Voltage: 400 V, 50/60 Hz - Made in Germany Condition: Used (see pictures). Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Guedpfx Aexl Aguocmoi You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Lohberger Food Service Counter Dimensions: Width: 2100 mm, Depth: 850 mm, Height: 800 mm Height with glass shelf: 1170 mm Depth with tray shelf: 1180 mm Basin: W x L x D 300 x 510 x 200 mm Gsdpoxqx Rgofx Acmoui Water supply via water connection to the basin. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Promeos Industrial Gas Furnace 850 °C For sale is a high-performance, gas-fired PROMEOS industrial chamber furnace, manufactured in 2018. The unit reaches a maximum furnace temperature of 850 °C and has a rated thermal output of 300 kW. According to the available technical data, operation is intended for natural gas types H, E, and L, as well as propane. The furnace features a lift-up door and is suitable for industrial heat treatment and production processes. Technical Data Manufacturer: Promeos Unit designation: BA 31010.0561.0000 Year of manufacture: 2018 Max. furnace temperature: 850 °C Gusdpfx Acoz Ipuuemsi Rated thermal output: 300 kW Burner heads: 2 × (3 × 40-03 CEO) Fuel: Natural gas type H, E, and L / Propane Gas connection pressure: 100 mbar Propane consumption: approx. 11 m³/h Combustion air requirement: approx. 335 m³/h Exhaust gas mass flow: approx. 453 kg/h Air ratio: 1.35 ± 0.05 NOₓ at rated load: approx. 20 ppm CO at rated load: approx. 10 ppm Electrical connection: 400/230 V AC, 3L/N/PE Electrical connection power: 4 kW Protection class: IP54 Weight: approx. 4,700 kg Dimensions (W × D × H): approx. 3,000 × 3,000 × 3,400 mm (height including lift-up door) Internal/usable space dimensions (W × H × D): 1,500 × 950 × 1,500 mm Usable space volume: approx. 1.58 m³ Last known maintenance: 2021 "All from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs upon request!

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in ready-to-use condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum compatibility and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you will receive a complete, ready-to-use system. Gujdpfsz I Szwox Acmsi The expensive double-walled glass vessel with bottom outlet, the heating bath with temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the tedious and costly individual purchases, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket allows for precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal wall scraping with viscous masses, as well as a suitable flow breaker to prevent vortex formation and for perfect vertical mixing. Dispersing device: IKA ULTRA-TURRAX T25 including matching dispersing shaft. Enables highly effective homogenization and size reduction directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components as well as all necessary holders. Note: The sale is without control software. The system can be fully, independently, and easily controlled directly via the hardware controls. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Corpus lifting and aligning device Strip-feed table with lifting and aligning device Fezer vacuum lifter Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm You can find more items – new and used – in our shop! Gusdevdcmvjpfx Acmoi International shipping costs available upon request!

Condition: used, Böllhoff Uniquick Vario Screw Feeder   UNIQUICK Feeder Type 360 Plastic sorting container, ∅ 360 mm Quiet and gentle conveying Optimal helix dimensioning depending on the conveyed material (width and height) Gedpjwbr N Hjfx Acmoui Integrated and controlled deflector High wear resistance Consistent conveying performance through amplitude control Housed in a sound-insulated enclosure, mounted on a frame Belt width: 20 mm Head diameter of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l   SIM BB-10-C (ws) Belt Bunker Bunker basin, chute: Stainless steel Belt: White, FDA-approved Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC geared motor 230V / 50Hz Bunker with innovative drive to ensure a metered, quiet and gentle feeding of screws and fasteners.   UNIQUICK Multi Modularly expandable 3-way diverter Distributes the sorted screws to three stationary screw driving machines   Singulation Adapted outlet rail Precise guidance at the head Modular design Few format-dependent parts Reproducibility of the component Sensor monitoring Maintenance-free   Noise reduction Screw conveying in a plastic container Lining with noise-reducing material Air-tight blowing of screws   Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017   Dimensions: HxWxD 1050 x 650 x 650 mm   Technical data   You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes the generation of abrasion due to filling level and vibrations. Function: It is a feeder that combines the advantages of screw conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimize contamination due to abrasion. Application area: It is used where a high degree of cleanliness is required during feeding to ensure clean screw fastening. Gujdpfox Elfcex Acmei Feeder unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt stop Screw conveyor WFL 200 IU (200 mm) with singulator Aluminum frame with Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volts You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which reduces the formation of abrasion due to material level and vibrations. Function: It is a feeder that combines the advantages of helical conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimize contamination through abrasion. Application area: It is used where a high level of cleanliness is required during feeding to ensure clean fastening. Feeder unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt trap Helical conveyor WFL 200 IU (200 mm) with singulator Plexiglass enclosure Guodpfx Acox Elkfsmoi Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volts You can find more new and used items in our shop! International shipping costs upon request!

Condition: used, ZIM Hülsta Back Panel Saw Manufacturer: ZIM Hülsta-Werke Designation: Back Panel Saw Year of Manufacture: 2014 Serial Number: 380114008 Description: Movable saw unit 2 movable Benz four-spindle drilling units Suitable for milling and drilling operations Tilt drilling RWH drilling Sawing Sawing and RWH drilling Feed roller table Protective enclosure with Leutze laser barrier system Control cabinet Dust extraction piping Godovdb Tbjpfx Acmoui Control terminal, consisting of: PC, flat-screen monitor EIZO FlexScan S1911 Keyboard and mouse, hand scanner, terminal cabinet Mobile steel container (beige) Handshake signals PC-PLC 1. Data handling is exclusively performed by the PC. 2. The clamping system sends a transmit release (VB.TransmitRelease) to the main PC, which then transmits the head and machining data. 3. The main PC activates a handshake (VB.DataSent) after the data has been transmitted. 4. Then, the VB.TransmitRelease and VB.DataSent are removed from the clamping system. 5. This procedure is triggered again for each new component. More new and used items can be found in our shop! International shipping costs upon request!

Condition: used, Ultrafilter LP 0072 compressed air treatment dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) Gsdpozwl Rgjfx Acmsui This system was specifically developed for applications that require absolutely highly pure compressed air – ideal for operating laser cutting systems, the pharmaceutical and food industries, or electronics manufacturing. The system removes not only moisture in a 5-stage process, but also cleans the compressed air extremely efficiently of oil vapors, particles, and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Voltage supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ removal: Inlet max. 1000 ppm → Outlet max. 100 ppm - Container test overpressure: 20.8 bar - Year of construction: 2004 Dimensions (H x W x D): 2000 x 600 x 800 mm We will gladly offer you a suitable bank financing option for your project. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Ultrafilter LP 0072 compressed air treatment dryer Industrial adsorption dryers and CO₂ purifiers from the premium manufacturer Ultrafilter (Donaldson). This system was specifically developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries, or electronics manufacturing. The system removes not only moisture in a 5-stage process, but also cleans the compressed air extremely efficiently of oil vapors, particles, and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Voltage supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ removal: Inlet max. 1000 ppm → Outlet max. 100 ppm - Container test overpressure: 20.8 bar - Year of manufacture: 2002 Dimensions (H x W x D): 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. You can find more new and used items in our shop! International shipping costs on request! Guedpfx Acszwmacemei

Condition: excellent (used), mileage: 514,000 km, power: 368 kW (500.34 HP), first registration: 09/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,000 mm, fuel: diesel, fuel tank capacity: 330 l, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, Equipment: AdBlue, cruise control, = Additional Options and Accessories = - Brake booster - Refrigerator - Sleeper cab - Tool box = Notes = Transmission: Automatic Number of gears: 12 Transmission model: Volvo I-Shift / Automatic / 12 Gears / 2600 Nm Color: Blue Wheelbase: 300 cm Load capacity: 70000 kg Manufacturer: Volvo Type: FH13 500 hp 6x4 VIN: YV2RT40D0JA825417 Year of Manufacture: 2018 Mileage: 514,000 km Engine: 500 HP / Diesel 12.8 ltr / EURO 6 / SCR + EGR / VEB+ Transmission: Volvo I-Shift / Automatic / 12 gears / 2600 Nm 1st axle: 8,000 kg / Air suspension / 385/65R22.5 2nd axle: 10,500 kg / Air suspension / driven / 315/70R22.5 3rd axle: 10,500 kg / Air suspension / driven / 315/70R22.5 Wheelbase: 3,000 mm Axle ratio: i = 2.83 Unladen weight: 9,600 kg GVW: 29,000 kg GCW: 70,000 kg Equipment: 330 L Fuel tanks Adblue tank, 65 L 24 volt electrical system Jost JSK 2 inch fifth wheel Pneumatically operated sliding fifth wheel Mass switch Working lamps Tool boxes between rear tires Tandem lift Frame cover Cabin: FH Globetrotter sleeper cab Lane keeping assist Adaptive cruise control Forward collision warning & emergency braking Coffee machine Roof hatch 2 x Bed Comfortable leather seats Special interior Refrigerator Storage boxes Engine and cab parking heater Radio CD player / Bluetooth = Further Information = General Information Year of construction: 2018 Usable material: Floor Technical Information Engine displacement: 12,777 cc Transmission Transmission: I-Shift, 12 gears, Automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steerable Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 10500 kg Gusdpfxsuu E Sfe Acmji Rear axle 2: Tire size: 315/70R22.5; Twin tires; Max. axle load: 10500 kg Weights Unladen weight: 9,600 kg Payload: 70,000 kg GVW: 29,000 kg Functional Body manufacturer: Volvo Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: Upon request