Used Filing for sale (434)

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Download PDF file for photographs Dcedpfx Acjv Rb Apjvjf

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3093-002, input voltage: 400 V, type of input current: three-phase, Profile cutting center, cutting only. It does not have milling functionality. It was used to cut Kommerling 70, 76MD and 88MD profiles. The machine is currently packed and stored. Maximum feed profile length: 6500 mm. Cutting angles: 45°, 135°, and 90°. Label printing capability. Cutting is performed from an .xml file. Minimum part length: 280 mm. Djdpfx Aceyzdpljvscf

Condition: ready for operation (used), thread length: 3,000 mm, Maximum spindle bore is Ø 80 mm. The possible diameter from the traverse path is max. Ø 250 mm and min. Ø 20 mm. Machining length: 3000 mm. Comes with accessories: change gears, steady rest. For further technical data, please refer to the PDF file. Dcedpfx Aov Huihscvsf

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 788 € 3/4" 26,9 mm, 1" 33,7 mm, mm 3 mm 2.5 mm 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. Djdpfxjyq Svdj Acvecf The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA) Dcedpfx Acetx Ux Rsvjf

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Dcodpfx Aoyw N Acscvjf Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 500 kg, The HAAS Multigrind CB is a universal multifunctional grinding machine designed for grinding gear cutting tools, involute profiles, and spline shaft profiles. Thanks to its large axis travels of 700 x 410 x 500 millimeters, its robust stability, a spindle power of 30 kW, and a high feed rate of 30 meters per minute, it is optimally equipped for custom grinding applications. Technical Data Diameter: 500 mm Axis travels: X 700, Y 410, Z 500 mm Dimensions: 3.0 x 2.65 x 3.65 m Machine weight: approx. 8,500 kg Dodpfxox Uwqpe Acvscf *All information and data is non-binding, subject to prior sale. Key Features: Software: For grinding straight and helical flute hobbing cutters with dressable and non-dressable grinding wheels, grinding involute profiles and spline shaft profiles by importing .dxf files Accessories: Various grinding arbors: Ø 27, Ø 32, Ø 40, Ø 50, Ø 60, Ø 80, grinding wheel adapters and Hainbuch collet chucks.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser We aim to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideally suited for workshops and repair shops. A perfectly configured cutting parameters library is included, along with first-class service. - Includes 2D bevel cut function for weld seam preparation or the production of countersunk holes (see image) Please also consider our attractive leasing and hire-purchase offers. - Machine does not include an automatic pallet changer! Loading is performed on the long side of the machine - Very compact footprint - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters of installation space - 3kW laser source from MaxPhotonics (G5/German version) - Laser generator with socket efficiency better than 30% - Suitable for aluminum - Top quality—schedule a viewing now! Cutting capacities: - Steel sheet up to 22mm (max) - Stainless steel sheet up to 12mm (max) - Aluminum sheet up to 10mm (max) - Brass sheet up to 8mm (max) - Travel range: 1500 x 3000mm (for large formats) - Machine control system in German - Safety light curtain for maximum operator protection - Comprehensive collision protection for the cutting head - Large laser safety windows for process observation - Extensive cutting parameter file - Nesting module included - Very easy to operate - High-performance laser chiller - Machine control system in German - German service and spare parts supply - Powerful laser chiller - Optional filter extraction system available (5.5kW with frequency converter for quiet operation) Leasing or hire-purchase is available through our financing partner Sale only to businesses. Delivery/consulting/sales only in Germany, Austria, and Switzerland. Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.5m Total weight: approx. 4500kg Dcsdpfx Asyacqwocvsf Need a different laser power, table format, or table size? No problem. I am happy to prepare a customized offer. E.g., 2kW machine from €29,990 Not sure which laser power is right for your application? Of course, I can perform cutting trials according to your requirements. There are many possibilities here.

Condition: used, Year of construction: 2023, gebraucht 2023 8285 prompt, Zwischenverkauf v Türkei 33900 € 1 30 to 1050 mm 3 (Y1, Y2, X) 160 mm Dcjdpfowirnfox Acvsf 850 mm 250 mm 390 mm hydraulisch 10 mm/s 130 mm/s 495 mm 250 mm/s 835 mm 104 mm 75 l 7.5 kW 2470 mm 1250 mm 2245 mm 3250 kg demo machine / mint condition net price (price for new machine € 41.200,00) Y1, Y2, X - 3 Axis Control Unit - DT 10 Touch screen 2D graphic (Remote Control) Back gauge: motorized & linear guide & ballscrew European clamping system European clamping system top tool European style bottom tool holder Support arms with T-Slot Safety side covers (Non CE) World known electrical equipments OPTION: DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) € 2.110,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 76820 € 1451.9 € 160 to 4050 mm Y1 / Y2 und X Achse 200 mm 3600 mm 300 mm 430 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 620 mm 250 mm/s 858 mm 104 mm 15 kW 4850 mm 1900 mm 2610 mm 10500 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy Dsdpfx Acswird Hjvjcf OPTION: CNC controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES! (sample photo)

Condition: new, Year of construction: 2025, neu 2025 080112 prompt, Zwischenverkauf v Türkei 86376 € 1438.29 € 1 76100 € 175 to 3050 mm Y1 / Y2 / X und R-Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 100 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 4250 mm 1700 mm 2850 mm 10900 kg 4axes (Y1, Y2,X and R) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German Dodpfx Acswiranovocf ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 10WEEKS): Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, Year of construction: 2025, neu 2025 080109 prompt, Zwischenverkauf v Türkei 68282 € 1135.89 € 1 1 60100 € 120 to 3050 mm Y1 / Y2 / X und R Achse Dcjdowiq Siepfx Acvjf 180 mm 2550 mm 250 mm 375 mm hydraulisch 100 mm/s 9 mm/s 77 mm/s 620 (mit optionaler R-Ach mm 250 mm/s 878 mm 104 mm 150 l 11 kW 3750 mm 1230 mm 2400 mm 5900 kg 4 axes (Y1, Y2, X and R axes) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN and ENGLISH ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy OPTION: DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Condition: new, Year of construction: 2024, neu 2024 8319 prompt, Zwischenverkauf v Türkei 77982 € 1326.78 € 1 70200 € 200 to 3050 mm Y1 / Y2 / X und R Achse 210 mm 2550 mm 250 mm 445 mm hydraulisch 100 mm/s 7 mm/s 73 mm/s 620 (mit optionaler R-Ach mm 250 mm/s 858 mm Dodowiqp Iopfx Acvecf 104 mm 150 l 15 kW 3750 mm 1390 mm 2500 mm 8160 kg 4 axes (Y1, Y2, X and R axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC CONTROLLED CROWNING TABLE intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy OPTION: CNC controlled crowning table incl. CNC controlled R-axis (adjustment range in X = 500 mm) incl. DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES! (sample photo)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet Djdpsyvhwisfx Acvscf - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. Djdpfx Ajv Awrwjcvscf + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 102300 € 1933.47 € 80 to 2550 mm 4 320 mm 2840 mm 500 mm servomotorischer Riemenan 105 mm/s 10 mm/s 105 mm/s 650 mm 250 mm 3700 mm 2200 mm 2550 mm 6400 kg Electromotor drive with multiple switched flat belt system Djdpfsynndfjx Acvscf 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17“ - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: -no reduction of working width by side side columns, distance between columns is bigger as bending width - up to 30 % higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal - marginally frame deflection - now crowning necessary by spreading the force along the bending length - high repetition and bending accuracy along the bending lengt -low energy consumption -no hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 74800 € 1413.72 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table Dcjdpfsynm A Hox Acvof upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 72300 € 1366.47 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws Dcsdpfjynm Ayox Acvjf CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 159300 € 3010.77 € 320 to 4050 mm Y1 / Y2 / X und R Achse 365 mm 3600 mm 410 mm 630 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 5300 mm 1910 mm 3230 mm 20100 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode Dedpfx Acoynm Atjvjcf - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 127400 € 2407.86 € 220 to 4050 mm Y1 / Y2 / X und R Achse 265 mm 3600 mm 410 mm 530 mm hydraulisch 200 mm/s 12 mm/s 180 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 5250 mm 1770 mm 2900 mm 15000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory Dodpfxsynm Ame Acvjcf - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 252800 € 600 to 4050 mm Y1 / Y2 / X und R Achse 365 mm 3100 mm 410 mm 700 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 280 l 5750 mm 2500 mm 4000 mm Dcedpoynmxnsfx Acvjf 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control Delem DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: used, Year of construction: 2017, machine/vehicle number: AT86, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Conclusion of the Heating Tunnel HTD12 Dcjdpfx Acevxz Axsvsf The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment.

Condition: repair required (used), functionality: fully functional, machine/vehicle number: 8500243, Year of construction: 2017, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, input current: 13 A, input frequency: 5,060 Hz, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, With the Stratasys J750/J735 3D printers, you can streamline and reduce the cost of producing models from different materials on the same build tray in the same print job. The J750/J735 3D printers allow you to assign colors to parts of a model at the design stage (using CAD software), save the model as a VRML file, and have the model printed in the desired colors. The Stratasys J750 has a build area of 490 x 390 x 200 mm (19.3 x 15.35 x 7.8 in). Dcodevu Riaepfx Acvjf Spare parts and materials are available. The machine has only been used internally, primarily for product development.

Condition: used, Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving -Shelf trolley: with 6 levels. Writing tray and filing wall Dcedpfx Acstlzfkovef -3 levels: with wooden insert -Chassis: 4 swivel castors, with brakes -Total dimensions: 1260/430/H2110 mm -Weight: 93 kg

Condition: used, Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 15 x 20 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 150 mm -Grinding length: 150 mm -Length of the body: 200 mm -Mounting hole: 30 mm -Number: 2x available -Price: per piece Dcsdpfx Acjb A S Rbsvef Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file