Used Fence for sale (1,028)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Bledpeq H Sqdofx Afmjp Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, Year of construction: 2026, Welcome to Maschinenhandel Knipfer We would be happy to arrange a viewing of the machines on our premises by appointment. We are not always on site, so please call or write to us in advance. ━━━━━ Made in the EU. New machine, top quality! - CE marking - 7.5 kW main motor - Scoring saw - Swiveling electrically - 45° - Height adjustment electrically - Max. cutting height: 155mm - Sliding carriage can be locked in various positions - Wide and narrow dust extraction hood, quick to change - Max. saw blade diameter: 350mm - Extendable table extension on the crosscut fence Bljdpemx R Efofx Afmsp - Crosscut fence extendable up to 330cm - Edge trimming shoe - Clamping device - Miter gauge - Weight: 1100kg - Sliding carriage 320cm x 40cm - Cutting width at the parallel fence 125cm - Dust extraction port 120mm - Speed indicator ━━━━━ CONTACT & CONSULTATION ━━━━━ Your contact person: Johannes Knipfer Tel.: Gewerbegebiet Ost 25a 92353 Postbauer-Heng ━━━━━ IMPORTANT NOTE All information is subject to change without notice. Technical changes reserved by the manufacturers. Price changes, interim sales and printing errors reserved. Prices apply to collection. Shipping possible for an additional charge and by arrangement. Illustrations may show optional equipment that is not included in the price. A forklift is available for loading.

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Blsdpfx Afsgbug Nomsp Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 Bljdpfx Afsfd Ilyemsp - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels

Condition: like new (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 45 mm, Engel Victory 500/110 Tech Horizontal injection moulding machine with 110 tons clamping force, brand Engel, model Victory 500/110 Tech. Year of manufacture: 2004. Approx. 69,000 automatic operating hours. Includes a fully equipped production cell: ENGEL ERC 43/1-EA Robot (2004), conveyor belt, and safety fencing. The injection moulding machine is delivered RE-conditioned by our expert technical team and in optimal working condition. We can offer our customers on-site commissioning service, ensuring proper machine operation upon installation completion. Bljdpfx Asw Hbiajfmop Technical Details: Screw diameter: 45 mm Year of manufacture: 2004 Operating hours: 69,000 Opening stroke: 507 mm Injection volume: 318 cm³ Injection pressure: 1016/(1603 increased) bar Maximum distance between platens: 800 mm Minimum/Maximum mould thickness: 300 mm (min) / 500 mm (max) Platen dimensions: 740x680 mm

Condition: ready for operation (used), Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg SCM Surface planer F 410 N ----- Technical manufacturer's description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence Bedpfxswzmu De Afmelp ----- Price of the above machine on request! ----- (technical data according to manufacturer - without guarantee!) All prices quoted are net and subject to VAT.

Condition: used, Planer KÖLLE A50 - used - with noise-insulated table lips ---- Technical Data ---- Planing width: 510 mm, Table length: 3,000 mm, Number of knives: 3 pcs, Swivel range of planer fence: 45°, Extraction port: 160 mm Bledpfew I T Nyjx Afmep

Condition: new, Year of construction: 2024, Exhibition Machine Year of Construction: 2024 Equipment and Technical Data: Robust German engineering for trimming, cross-cutting, formatting, mitre cutting, etc. - Top-mounted control panel at eye level, swiveling, incl. fence guide - 7" touchscreen control for the electromotive positioning of cutting height, saw blade swivel adjustment, cut width stop and optionally for the height and side adjustment of the scoring saw Auto-EPS. Tool database for 50 saw blades and display of the current speed. - Electromotive height and swivel adjustment - Swivel range of the saw blade from 0 to 47° - APA saw blade quick clamping system - Speed of main saw blade 3000/4000/5000/6000 rpm - Protective device that can be swiveled away on both sides, safety guard with interchangeable insert wide/narrow for saw blades up to Ø 450 mm - Width stop with a cutting width of 1250 mm, electromotive - Trolley with a cutting length of 3200 mm and locking every 50 mm - Cross slide with support roller and adjustable extension in both directions. Length stop with mm scale and extension up to 3500 mm with 2 adjustable folding stops and 1 end stop, simultaneously usable as an angle mitre stop on both sides, infinitely adjustable from 0-46° with automatic length compensation and detent for 15°, 22.5°, 30°, 45° fixable. - Push-button control with electronic soft start (start/stop) - Electronic, maintenance-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at the width stop 1250 mm, electromotive - Length stop on the cross slide extendable up to 3500 mm - Max. saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast iron table top 1200 x 665 mm - plus table extension 750 x 655 mm - Table extension 1430 x 940 mm - Table height / working height 900 mm - Extraction connection 120 mm on the machine body, 80 mm on the safety guard - Motor power 5.5 kW / 7.5 HP - Electrical voltage 400 V / 50 Hz - Trolley, length and width stop profiles anodized - Machine body and swivel arm powder-coated in anthracite RAL 7021, cladding sheet safety guard on top in violet blue RAL 5000, on the machine body in light gray RAL 7035 - Footprint: 7110 x 4150 mm - Weight: approx. 1050 kg depending on the model, up to 1250 kg - CE compliant, GS tested, BG-wood dust tested Bljdpfjw I Ummjx Afmop Special equipment: Incl. scoring unit 0.55 kW, electromotive positioning for side and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table into a lateral parking position, so that larger saw blades than Ø 350 mm can also be used without removing the scoring saw blades. Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: Tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by incremental adjustment by 0.05 mm per step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 Incl. SWIVELING DEVICE FOR THE CROSS SLIDE Quick and ergonomic sliding into the parking position Incl. Length stop with digital display mounted on each stop flap, adjustable to 0.1 mm, length max. 3300 mm

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical Specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow flat-top tooth Blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting fence from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction connection: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping grippers, motorized on vertical axes via a ball screw, moving from top to bottom. The grippers handle panels weighing up to 150 kg. - Torsion-free, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slat bed Bledpjw I U D Eofx Afmep - Fine-adjustable flip stop with extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting fence - Manual programming rail with 5 T-slot nuts - Pneumatic immersion of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 intermediate support elements, pneumatically extendable - Pneumatic saw head locking - Control panel with documentation holder - Switch unit on the saw unit: start button, stop button - Tool cabinet - Scale illumination for vertical cuts Partnership Edition Features: - Digital display for the flip stop - Digital display for the saw unit with incremental mode - Pneumatically tiltable saw unit - Scoring system with controlled counter-air nozzle, numerical display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: Short-term Location: Flörsheim

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Bledpfjw Nv I Uox Afmsp Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, right-/left-hand rotation ----- Technical Data ----- Blodsw Nv Nfopfx Afmsp Table size: 1,080 x 750 mm, Spindle diameter: 30 mm, Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Lower extraction port Ø: 120 mm

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Blade changes in seconds Self-locking Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Bodpfxew Rhkqs Afmolp Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Bjdpfx Aewun Irefmjlp Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Blodpfewwz Dljx Afmsp Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter: 800 mm Belt speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Bodpfjww Ravex Afmslp Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm With special lining (optional), min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Table height: 930 mm Extraction port: 2 x Ø 120 mm Motor power: 4 kW / 5.5 HP Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 525 kg TECHNICAL DESCRIPTION Robust German engineering Machine frame in a modern, visually appealing, torsion-free double chamber steel welded construction Upper and lower doors protected by limit switches Upper and lower precision bandsaw blade guides APA 2, Size 2 Finely planed cast-iron table Table can be tilted up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tyres Rip fence can be used on the left of the saw blade, fence profile can be folded down Blade tension indicator 1 bandsaw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.30I Mechanical height adjustment of blade guard by handwheel with locking ratchet Cam switch with star-delta starting and emergency stop button Mechanical motor brake with main switch and motor protection relay CE compliant GS tested Machine frame, left-hand version Drive motor: 4.0 kW / 5.5 HP Push-button control, 3 to 4 kW With automatic star-delta start (for 3.0 – 4.0 kW motor), (instead of cam switch) Availability: Short-term Location: Flörsheim

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Bedpfx Ajxbnyrsfmelp Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator CE certified DTR technical documentation Year of manufacture: 2005

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Stegherr Cross rung milling machine TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base EUR 1.070.00 Foot switch EUR 900.00 Adjustment optics EUR 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece EUR 650.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) EUR 190.00 HM saw blade, price EUR 170.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price EUR 700.00 per individual tool Packaging in a crate (suitable for land transport) EUR 650.00 Packaging shrink-wrapped on a pallet (only within Europe, Blsdpfjyrtzqex Afmep not for air freight) EUR 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: excellent (used), Year of construction: 1987, Max Cutting length : 2250 mm Automatic backstop, max depth : 800 mm Manual handwheel for accurate measurement 2 hand operated 2 x laser fence Green light indicator on cutting point 2 x extra cutting knives included Ask for WHATSAPP video presentation Bsdpfxjyurl Ts Afmelp

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Blodpfoyxl Siex Afmep Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: new, Bernardo Panel Saw Classic 3200 C The Classic 3200 C panel saw with tilting saw blade meets all the requirements of modern workshops and is the ideal machine for cost-conscious small and medium-sized enterprises. Both the robust design and the generous dimensions of the machine ensure optimal working conditions for cutting solid timber or large panels; even decorative panels can be processed effortlessly using the standard scorer unit. Features • Aluminum sliding table with hardened guide rails • Standard table extension and table widening for handling larger panels • Stable outrigger table allows processing of large and heavy sheets without additional assistance • Powerful drive motor ensures optimal cutting performance even during extended operations • User-friendly degree scale directly readable from the handwheel • Scoring unit with independent drive included as standard • Extendable telescopic fence (up to 3100 mm), mountable on the outrigger table front and back • Rigid saw unit guarantees vibration-free and precise operation • Machine body constructed from torsion-resistant steel and cast iron combination • Hinged rip fence with robust 40 mm round bar guide Technical Specifications Table size: 935 x 620 mm Sliding table: 3200 x 370 mm Crosscut length: 3200 mm Max. saw blade diameter: 315 x 30 mm Max. cutting height 90° / 45°: 90 / 65 mm Cutting width at rip fence: 1295 mm Table height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Outrigger table with roller: 1210 x 860 mm Main saw blade speed: 4000 / 6000 rpm Scoring saw blade speed: 8000 rpm Scoring saw blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 4.0 kW (5.5 HP) Motor input S6 40%: 5.5 kW (7.5 HP) Scoring motor power: 0.75 kW Bodoywxrgepfx Afmslp Voltage: 400 V Machine dimensions (W x D x H): 3445 x 3560 x 1570 mm Weight: approx. 710 kg Scope of Delivery • Saw blade guard with infeed roller • Mitre fence • Crosscut shoe • Table widening • Extendable telescopic fence • Longitudinal fence stops • Outrigger table with roller • Push stick • Scoring unit with independent motor • Operating tools

Condition: excellent (used), Pendulum Saw Bottene Motor power: 3.7 kW, 380 V, 50 Hz Maximum saw blade diameter: 500 mm Cutting height: approx. 120 mm Maximum throat: 500 mm Blsdpfx Aoydnitjfmop With roller table and longitudinal fence on the left, 3000 mm With roller table on the right, 1000 mm Extraction diameter: 120 mm Approx. dimensions (L x W x H): 4200 x 1150 x 1650 mm Weight: approx. 200 kg Saw can be swiveled to the right Saw and roller table mobile Including saw blade Note for used machines: • Technical details and intermediate sale subject to change. • Prices are ex location and refer to self-collection – free loading at site! • The machine has been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: reconditioned (used), Year of construction: 2005, MACHINING CAPABILITIES: - Mortise 30x30 mm, Max depth 150 mm - Vertical travel (Z axis) max 300 mm Adjustable via stops - Transversal adjustment (Y axis) max 300 mm (290 mm with fence) Front and handwheel adjustment - Longitudinal adjustment (X axis) max 300 mm Manual with pneumatic clamping MACHINE CONFIGURATION: - Welded steel frame Bledpfxjx Rz Dxe Afmjp - 2m support table, 40cm support rollers Fence stop guide 2000 x h.110 mm 2 pneumatic workpiece clamps Working height 1m (adjustable) - Automatic lubrication unit per cycle OTHER CHARACTERISTICS: - Power supply 400V, 50Hz, Three-phase N+T, IN 16A - Installed power 3 kW - Dust extraction: 1 top port Ø95mm ext. for Ø100mm hose - Required pneumatic supply 7 bar - CE marking, lockable main switch - Overall dimensions (LxWxH): 2.10x1.10xh.2.20m - Weight 350kg

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface Bjdpfx Afsw Imptemjlp ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Blsdpfx Aeyzxa Esfmep Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Bjdpfx Afjyzyh Dsmelp Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.