Used Fence for sale (1,002)

Condition: used, Year of construction: 2004, functionality: limited functionality, number of straightening rollers: 9, coil weight: 2,000 kg, coil outer diameter: 1,600 mm, coil inner diameter: 430 mm, straightening roller diameter: 30 mm, sheet thickness steel (max.): 3 mm, coil width: 400 mm, total length: 10,805 mm, input voltage: 400 V, Strip Feeding Line KOHLER Type 30.400/9 – 2000.2H + BÜ3 - Double decoiler Type 2000.2 H - 9-roll strip straightener Type 30.400/9 - Strip guide BÜ 3 mm - Transfer table for sheet thickness up to 3 mm - Safety fence Ncodpfx Aoym Af Uod Een - S7 control in a separate switch cabinet

Condition: used, Year of construction: 2003, functionality: limited functionality, number of straightening rollers: 9, coil weight: 2,000 kg, coil outer diameter: 1,600 mm, coil inner diameter: 430 mm, straightening roller diameter: 30 mm, sheet thickness steel (max.): 3 mm, coil width: 400 mm, total length: 10,805 mm, input voltage: 400 V, Strip Feeding Line KOHLER Type 30.400/9 – 2000.2H + BÜ3 - Double decoiler Type 2000.2 H Nodjym Ab Aepfx Ad Eocn - 9-roll strip straightener Type 30.400/9 - Strip guide BÜ 3 mm - Transfer table for sheet thickness up to 3 mm - Safety fence - S7 control in a separate switch cabinet

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Ncjdpfxjw I Uine Ad Ejn Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Nodsv Sv Enepfx Ad Eecn Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 1990, machine/vehicle number: V178451, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, planing width: 500 mm, total width: 1,000 mm, total height: 1,200 mm, overall weight: 1,000 kg, total length: 2,900 mm, working width: 500 mm, chip removal for surfacing (max.): 8 mm, height adjustment type: hydraulic, jointer table length: 1,640 mm, space requirement height: 1,200 mm, space requirement length: 2,900 mm, space requirement width: 1,000 mm, table length: 2,900 mm, Equipment: motor brake, We are offering this used Otto Martin T 53 jointer planer, year of manufacture 1990. MARTIN Jointer Planer T53 Description: For sale is a MARTIN T53 jointer planer. The machine is no longer needed and is therefore being sold. Technical Data: • Planing width: 50 cm • Infeed table: 164 cm • Outfeed table: 120 cm • Max. cutting depth: 8 mm Nedpfsx R Ttfsx Ad Eecn • Operating voltage: 380V • Motor: 5.5 kW • Cutter block for strip knives • Automatic motor brake • Slotted, low-noise table lips • Hydraulic table adjustment • Concave and pointed joint adjustment • Digital display for cutting depth, LED (non-functional) • Digital display for concave/pointed joint, LED (non-functional) • Aigner tilting fence 45°, with extendable rail • Space requirement (LxWxH): approx. 2900 x 1000 x 1200 mm • Weight: 1000 kg • Year of manufacture: 1990 Condition: The machine is fully operational and ready for use. Note: The LED displays are unfortunately non-functional. All other features work perfectly. Inspection & Collection: Viewing by appointment is possible. Collection on site. An invoice with VAT will be issued. If you have any questions or require further information, feel free to send us a message or call us.

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: Ncjdpfx Adjxnlflo Ejn - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: good (used), total width: 3,000 mm, pressing force: 100 t, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Njdpfx Adovwcdus Eocn Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Ncjdpfx Adjxgbwzo Eon Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: new, functionality: fully functional, Year of construction: 2025, NEW – Hydraulic Earth Auger Set Ø150/200/300 mm ❗ ONLY €799 ❗ Clearance Sale – Immediately Available! ⭐ BRAND NEW – unused – ready for immediate use! ⭐ Complete set including 3 augers + motor + extension ⭐ OPEN-S mounting – flexible & universally adaptable ⭐ Significantly below market price! ⭐ SCOPE OF DELIVERY: ✔ 3 drilling diameters (150 / 200 / 300 mm) ✔ Hydraulic motor ✔ Extension ✔ Hydraulic hoses ✔ OPEN-S mounting Everything is new. Everything included. No additional purchases necessary. ⭐ Advantages of the OPEN-S mounting Ncedpfx Adeykz Hlj Eon ✔ Universally adaptable ✔ Ideal for workshop conversions ✔ Perfect for export ✔ Quickly convertible for different machines ✔ Saves on expensive quick coupler adapters The open mounting offers maximum flexibility during installation and is ideal for custom adaptation to various excavators and mini excavators. ⭐ Depending on the configuration, suitable for mini excavators between 1.8 t and 2.5 t. The differences are in the pin diameters and distances. Please specify machine type or pin dimensions with your inquiry. ⭐ Perfectly suited for: ✔ Fence construction ✔ Foundation work ✔ Screw foundations ✔ Planting holes ✔ Landscaping & horticulture ✔ Construction and agricultural projects Shipping & collection available – Warehouse in Rheda-Wiedenbrück Contact us anytime – fast response!

Condition: used, For sale: Used SAFETECH double pallet dispenser/stacker, Model: PDHTD. Pallet size: 1170 x 1170 x 150 mm (Chep / Loscam pallets). Pallet capacity: 2 x 25 pallets (2 hoppers). Power: 415V, 3 Phase. Control: Fully automatic and semi-automatic. The pallet dispenser includes: compressor and air receiver, hydraulic power unit, safety fencing, operation and maintenance manual. Price: on request. The new price of this machine was approximately €40,000. If you have any questions, please don’t hesitate to contact me. Machinehandel De Leeuw BV, Visit address: Oordeelsestraat 7b, NL-5111 PA Baarle-Nassau, The Netherlands. Ncsdpfxsgbd A Ee Ad Een

Condition: excellent (used), Year of construction: 2013, operating hours: 34,000 h, functionality: fully functional, WEISSER VERTOR C-1 L (2013) – Vertical Turning Center with Automation, C-Axis & Live Tooling – SINUMERIK 840D Solution Line For sale is a powerful WEISSER VERTOR C-1 L vertical turning center (year 2013) in excellent, ready-to-run condition. The machine is fully functional and equipped with automation plus a strong configuration for efficient production. The system has been used in an industrial environment for machining shaft/gearbox-related components, including pre-turning and functional turning operations. Thanks to the vertical design, the machine offers very good chip evacuation and high process reliability. Machining capabilities & spindle function (clear explanation) This machine is more than a standard lathe: with C-axis and live tooling, you can perform not only turning operations but also indexed/positioned machining. This enables drilling, cross operations and light milling tasks in one setup—ideal for reduced cycle times and stable part quality. Main spindle / C-axis allows: precise positioning for machining at defined angular locations combined turning + live-tool operations spindle speed up to 6,000 rpm for flexible process setup (depending on part and operation) Technical data (extract) Machine Manufacturer: WEISSER Model: VERTOR C-1 L Year: 2013 Condition: used, ready for operation Functionality: fully functional Machine No.: 1580196 Control: SINUMERIK 840D Solution Line Table / Working area Table diameter: 420 mm Swing diameter: 620 mm Center height: 420 mm Spindle bore: 50 mm Axes / travel ranges X1: 320 mm Z1: 844 mm C1 (spindle): up to 6,000 rpm W1 (tailstock): 1,400 mm X3: 1,500 mm Z3: 509 mm Feed rates Ncsdpsyhzgdsfx Ad Een Max. axis feed: 24,000 mm/min X3 feed: 60,000 mm/min Z3 feed: 30,000 mm/min Tool interface Tool system: CAPTO C5 Electrical data Supply voltage: 400 V AC / 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Rated machine current: 53 A Main fuse: 100 A slow-blow Dimensions & weights Machine (L x W x H): 2,800 x 2,450 x 2,800 mm Machine weight: 7,500 kg Conveyor/belt unit (L x W x H): 2,150 x 3,200 x 1,900 mm, weight 2,500 kg Chip conveyor (L x W x H): 3,500 x 800 x 1,600 mm, weight 500 kg Safety fences (stacked): 2,200 x 1,400 x 800 mm, weight 250 kg Loader (L x W x H): 2,000 x 1,200 x 3,000 mm, weight 250 kg Measuring unit (L x W x H): 700 x 900 x 1,700 mm, weight 500 kg Hours Spindle hours: 13,000 h Operating hours: 20,000 h Power-on hours: 34,900 h Equipment Automation / loading system Programmable tailstock Live tooling Tool measuring station Chip conveyor and peripherals (see technical data) Inspection / delivery Inspection under power possible by appointment. Machine offered ex-works / self-collection. Availability and handover details on request.

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Ncsdpfox Twcvox Ad Ejn

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-201-21-4348, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, workpiece length (max.): 5,860 mm, workpiece width (max.): 1,600 mm, controller manufacturer: HOMATIC, total height: 2,950 mm, total length: 11,500 mm, total width: 7,500 mm, controller model: PC85, spindle motor power: 7,500 W, Equipment: documentation/manual, HOMAG BAZ 722/58/K Gantry 4-Axis CNC Machine with 2 Shuttle Tables and Gluing Unit Year of manufacture: 2004 NOTE: The main spindle and the machine’s control computer were replaced approx. 2.5 years ago. Workpiece length X max. (with gluing unit) - max. 5660 mm with single loading - max. 2680 mm with pendulum (shuttle) operation Workpiece length max. (milling cutter D=25mm) - max. 5860 mm with single loading - max. 2870 mm with pendulum operation Workpiece width Y max.: - max. 1300 mm – all units - max. 1400 mm – with gluing unit - max. 1520 mm – with milling operation D=25 mm EQUIPMENT / SPECIFICATION Console Table / Vacuum System - 2 independently operating shuttle tables in Y-direction (2 Y-axes) Nsdpfx Aswpb Nfjd Eocn - Both shuttles can be synchronized for machining large workpieces (single mode) - 6 movable consoles per shuttle (total 12), each with 1 longitudinal stop at the front - Each console fitted with a lifting rail mounted on the side - Console length 1340 mm - 3 retractable lateral stops (2 left, 1 right, mirror position) - Approx. 20 vacuum blocks 160x140 mm - 2 vacuum pumps, capacity 100/140 m3/h, 1 per field (left/right) Milling Spindle / Units / Tool Changer - Main spindle 7.5 kW (S6 or S1 mode), n max = 18000 rpm, vector-controlled - HSK F63 tool clamping - Liquid cooling with temperature monitoring - NOTE: The main spindle was replaced in 2021. - C-axis with unit interface - Auxiliary spindle with permanently mounted gluing unit (with its own X & C axis), 360° edge banding with butt joint gluing - Double edge roll magazines, automatic edge change - Fixed vertical drilling head with 12 spindles (individually selectable) / 6 spindles in X, 7 spindles in Y direction Drive motor 4 kW, 4500 – 6000 rpm - 18-position tool changer (carousel type) - Sawing and trimming unit for tool changer - Boring and milling unit with 4 spindles (2 x X-, 2 x Y-direction) - Combination flush trim and scraping knife unit Chip Disposal / Safety / Other - Chip conveyor integrated in machine body - Safety fence left and right of the machine, 1 access door with safety interlock - Extraction port Control / Software: • PowerControl PC85 operating system NOTE: Both machine control computers were replaced in 2020. • WoodWop 5.0 • WoodScout • Power supply 400 V, 50/60 Hz • Cooling unit for control cabinet • Laser positioning Mr. BEAM Machine dimensions (occupied space after installation): L 1150 x W 700 x H 290 cm Availability: Immediately

Condition: excellent (used), SCM F3A jointer planing machine - Planing width: 300mm Njdpfx Aewzyuqed Eocn - Table length: 2100mm - Three-knife cutterhead - Weight: 290kg - Fence tiltable up to 45° - 3HP motor - 380 Volt

Condition: used, Kölle Formatic Panel Saw - Year of manufacture: 1997 - 5.5 kW motor - 400 Volt - Weight: 1050 kg - Overhead control panel - 4 speeds - Electric lifting, lowering & tilting - Digital display for fence - Cutting width 1 m right of the blade - Brake motor - 2800 mm Nodpfxex Ha Rvj Ad Eecn - Cutting height 145 mm without scorer

Condition: excellent (used), Year of construction: 1990, Spindle moulder TS110 Year of manufacture 1990 380 Volts, 7.5 HP Fence with fine adjustment 4 speeds: 3,000, 4,500, 8,000 and 10,000 rpm Ncodpfx Adsv Im Swe Esn Left/right rotation, brake Haffner 3-roller power feeder with 4 speeds, Power feed rollers new

Condition: used, Thickness planer HDA 63 Ncedpfsx Htbzjx Ad Esn - 630 mm planing width - 230 mm planing height - Table length: 1200 mm - 5.5 kW - Weight: 100 kg - 2 feed speeds - Dial gauge for height adjustment - Digital display on the mitre fence - 4-knife cutterblock - Rubber outfeed roller - Steel infeed roller - Width: 1100 mm The cutterblock outfeed (1050x1230 mm) can be electrically braked.

Condition: used, Year of construction: 1989, Used machine Ncjdpeykvw Eofx Ad Esn Year of manufacture: 1989 Equipment and technical data: - Working width: 220 mm - Working height: 120 mm - Feed motor power: 3 kW - Main bottom spindle motor power: 5.5 kW - Left/right spindle motor power: 7.5 kW - Top spindle motor power: 7.5 kW - 5th bottom spindle motor power: 7.5 kW - Spindle speed: 6000 rpm - Spindle diameter: 40 mm - Minimum tool diameter: 125 mm - Maximum tool diameter on bottom spindle: 125 mm - Maximum tool diameter on right spindle: 190 mm - Maximum tool diameter on left spindle: 180 mm - Maximum tool diameter on top spindle: 200 mm - Maximum tool diameter on 5th spindle: 180 mm - Feed speed, infinitely variable: 5–22 m/min - Feed roller diameter: 140 mm - Adjustment range of jointer table and guide fence: 10 mm - Jointer table length: 2000 mm - Feed reversible drive - Push button switch for feed "forward" - Insert cutter for guide groove - Powered roller on outfeed table - Manual lubrication pump Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Njdpfx Adjyl Sp Hj Eecn Very good condition; the machine comes from a small carpentry shop that was unfortunately closed down. Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1991. The fence jaw on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing jointing operations, such as for a gluing profile, to be performed. The entire fence can also be moved in depth with a handwheel and a threaded spindle, enabling very precise and fast adjustments. Equipped with AIGNER integral fence. With spindle lock by lever. Excellent chip extraction, with two extraction ports: 125 mm at the fence and 100 mm at the machine table. With 30 mm spindle, infinitely tiltable from -5 to 45°, tilting is electric with a very precise display. With forward/reverse rotation. We deliver and demonstrate the machine personally throughout Germany for €220.00, removing purchase risk; shipping to Austria and the rest of the EU is also possible on request. Large table opening up to 480 mm, which can be reduced using several rings (enabling use of large-diameter cutters and safe work with small cutters). With 3,000, 4,500, 6,000, and 9,000 rpm. Spindle height adjustment is also electric, with a precise digital display. Table made from high-ribbed cast iron. With interchangeable spindle (a 40 mm spindle can also be used). Very robust and durable design, built for heavy-duty milling; suitable for all milling operations. Optimal power transmission through V-belt drive. With manual and documentation. With 3-roller power feed unit HOLZ HER, type ET 117. Power feed offers forward/reverse rotation and 8 speeds; each feed roller is individually mounted. Machine table is 1,180 mm wide and 800 mm deep. Ready for immediate operation. 380V. With extra powerful motor, 7,500 and 9,500 W, via 2-speed operation. Equipped with all required safety devices, motor brake, and emergency stop; machine is BG-certified for woodworking and carries the GS safety mark. Machine weight approx. 1,200 kg. With motor protection switch against overload. Professional-grade machine, not DIY store junk. Optimal, simple, fast, and safe handling.

Condition: used, Year of construction: 2018, total height: 2,200 mm, total length: 4,550 mm, total width: 2,200 mm, Empty weight: 3.000 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: AH00000267 - Type milling table: Beam table - Drilling unit present: Yes - Saw unit present: Yes - Safety feature: Enclosed fence - Vacuum pump present: Yes Nodpfjxn S H Nex Ad Escn - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 2.2 - └ Connection diameter [mm]: 33 - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 130 - Transport dimensions: 4550mm x 2200mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Z.V.B. Pneumatic lifting platform with belt conveyor Manufacturer: Z.V.B Type: Pneumatic lift with belt conveyor Voltage: 230 V Nodpfxjvdpxlo Ad Ejcn Belt height approx. 400 - 800 mm Overall dimensions: H x W x D = 1800 x 5000 x 800 mm incl. Enclosure/ safety fence Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Body press Frame press Carcass max. 3000 x 2000 mm Safety fence system Sick C2000 safety light curtain Beijer Electronics E300 Operator Interface control panel Ncedpfx Adovdchge Ejn Workpiece discharge Roller toothed belt conveyor Control cabinet Mitsubishi Q2ASCPU programmable logic controller Mitsubishi A1SX81 Safety enclosure The C 2000 safety light curtain serves as manual protection for safeguarding hazardous points on machines and systems. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Good day! I would like to offer you the following machine: 1 used Altendorf F 45 panel saw - hydraulic height and tilt adjustment - digital display (speed and tilt) - 4.5 m cutting length - automatic star-delta starting - 105 mm cutting height with 350 mm saw blade and scorer - 155 mm cutting height with 450 mm saw blade without scorer Ncedpsyldfaefx Ad Een - 3000/4000/5000/6000 rpm - automatic motor brake - rip fence with fine adjustment - parallelogram safety guard - table extension and table widening - mobile base - extraction ports top and bottom - edging shoe - adjustable handle on sliding table - operating tools - operating manual/spare parts list New parts: - Narrow extraction hood 90° (EUR 181.00 + 19%) - Wide extraction hood 45° (EUR 268.80 + 19%) - Poly Flex V-belt 11W875 (EUR 35.50 + 19%) - Flat belt for scorer (EUR 32.50 + 19%) - Gas strut 50N for scorer (EUR 45.30 + 19%) - GUHDO 350 mm saw blade (EUR 78.50 + 19%) - New bearings installed on the saw spindle (EUR 250.00 + 19%) - New bearings installed on the scorer (EUR 150.00 + 19%) Special equipment: - 7.5 kW 380 Volt motor Original price: EUR 1,350 + 19% - Scoring unit Original price: EUR 3,150 + 19% - 4.3 m sliding table Original price: EUR 4,250 + 19% - Pneumatic pressure beam 3.2 m Original price: EUR 3,800 + 19% - Rip fence with fine adjustment 1.3 m Original price: EUR 580 + 19% - Duplex double-sided mitre fence Original price: EUR 1,350 + 19% - LASER cutting line indicator Original price: EUR 2,300 + 19% - Circular saw feeder Panhans Type 76 Original price: EUR 4,665 + 19% Price: EUR 13,800 + 19% VAT The machine has been technically inspected, cleaned, adjusted and newly painted. Cables and plug supplied, ready for immediate operation. Payment only by cash or bank transfer before collection. Shipping possible. The machine is sold without any warranty or guarantee. Please send me a short message. Thank you!

Condition: good (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine with jointing cutters and coping unit, designed for processing EVA hot-melt adhesives Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Coil separation: 3 x 45 mm or 0.8 x 65 mm Machine length: approx. 6,860 mm Top pressure manually height-adjustable Equipment: Manually adjustable infeed fence Jointing unit with 2 motors, 2.2 kW (each) both motors pneumatically controlled Hot-melt adhesive application Pressure zone with 1 primary pressure roller and 3 subsequent pressure rollers End trimming unit with 2 motors, each 0.35 kW automatically adjustable via program from chamfered to straight trim cuts Edge trimming unit with 2 motors, each 0.55 kW, for flush trimming, chamfer trimming, or radius trimming with 4-position fixed-point adjustment for side tracing Grooving unit with horizontal shaft, e.g., for back panel grooves Copy milling unit with 2 motors, each 0.35 kW Nodoygg Nkepfx Ad Ejcn Pneumatic infeed and outfeed control Profile scraping unit with pneumatic infeed/outfeed control Flat scraper unit Buffing unit Additional equipment: * Release agent application at infeed Control system PC 16 with color graphic user interface Attached return system LIGMATECH BOOMERANG ZHR 11 Return system currently not operational, in need of repair

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Ncsdoylpwuspfx Ad Een Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location: