Used Fence for sale (956)

Condition: good (used), Year of construction: 2008, used horizontal panel saw Manufacturer: Holzma Model: Optimat HPP350/43/43 Year of manufacture: 2008 Cutting length: 4300 mm Cutting width (programmed pusher travel): 4300 mm Roller track (10-track element): 1 unit Roller track (2-track element): 5 units Clamping grippers: 6 units, of which the first 3 have double fingers Air cushion table with roller elements: 4 units, each 2160 x 650 mm; of these, position 2 is movable/with drive unit Central blower: 1 unit with increased blower output Technical data: Saw blade projection: 80 mm Saw carriage feed: forward 90 m/min (EU limited to 25 m/min), reverse constant 90 m/min Automatic cutting height adjustment; pressure beam height control Angle alignment device, min. pushing width 0 mm; max. pushing width equals full cutting length Main saw motor 13.5 kW with pneumatic saw lift Scoring saw motor 2.2 kW, motorized saw lift, electric adjustment SCORING SAW UNIT (VVSH), TYPE 250/350/380 For splinter-free pre-scoring of soft and postformed panels as well as workpieces with edge-banding. Program-controlled vertical rise from below in through-feed. Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection value: 20 kW Gsdpfxeyzylco Afcjua Power Control CADmatic 4 control system; DATA TRANSFER ONLINE + USB PORT 19-INCH TFT FLAT DISPLAY WITH TOUCH FUNCTION 4 PNEUMATIC SQUARING FENCES ANGLE CUTTING DEVICE (MANUAL + Automatic); ANGLE CUTTING MASK CADMATIC Grooving program automatic incl. turbo-grooving CUT-OUT / STRESS-RELIEF CUTTING PROGRAM LABELING WITH PART GRAPHICS; labeling program and label printer Pica 104 DOCUMENTATION AND CONTROL TEXTS: GERMAN

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 443 h, Format 4 Panel Saw Kappa 550 e-motion - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scoring unit operation indicator - Crosscut fence 3200 mm, swivels 90°–45°, with 2 flip stops - Outrigger table 1250 x 650 mm - “X-Roll” sliding table, cutting length 3200 mm, mitre fence shoe - Electrically positioned rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm - Overhead guard, hood for 90° cuts and hood for angle cuts, both height adjustable and can be swung out of the working area - e-motion control system with 15" color touchscreen, operating panel at eye level. USB interface and network connection prepared, adjustable & swing-away from the working area Gedow Tfahspfx Afcjua - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Electrically positioned height & angle adjustment 0°–46° - Circular saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg - Scoring unit operation indicator (duplicate in original) - Total operating hours: 443.47 h - Including many as-new saw blades and groove cutter blade Price ex location Transport available at additional cost!

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. Godpfxjyz Rvxe Afcjua One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: good (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, warehouse no.: 503604 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: Selogica year of construction: 2012 operation hours: 43331 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 1300 mm opening stroke: 600 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2470 bar equipment included screen text german core pulling hydraulically 2x Gujdpfx Aoyvzyqofcoa machine incl. belt conveyor machine incl. Handling machine incl. safety fencing Anti vibration mounts measures of machine l x w x h: 6.12m x 2.25m x 2.21m total weight: 12200KG technical data robot-system handling type: Linearroboter manufacture: Arburg controller: Multilift year of construction: 2012 X axis: 400 mm Z axis: 1400 mm C axis rotation: 90 ° total weight: 450 kg

Condition: like new (used), Year of construction: 2000, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-410-M Technical features Dimensions Table dimensions: 2000 x 700 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 800 mmZ axis traverse: 800 mm Milling head Head type: Universal manual (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN2080) / Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 17 kW Feedrates Feedrate: 5 - 5000 mm/minRapid feedrate: 12000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approx.: 9000 kgMachine dimensions approx.: 5265 x 3250 x 2760 mm Accesories External coolantElectronic handwheel: HR-130New foot clamping tool rding and new perimetral wire-mesh fence  Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Gjdoyf Rr Hjpfx Afcsua

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Table Milling Machine TS110 Year of manufacture: 1990 Guedpev Im Swjfx Afcea 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000, and 10,000 rpm Left/right rotation, brake Haffner 3-roller power feeder with 4 feed speeds Feed rollers new Transport available at additional cost!

Condition: good (used), Year of construction: 1990, functionality: fully functional, Control panel at top, Gsdpfx Asyaq U Dsfcjua electric spindle lift, 30 mm spindle, electric tilting 45°, 6 speeds, motor power 7 kW, cast iron fence jaws, large table 2500 mm, Haffner 4-roller feed with 8 speeds, dimensions 2500 x 1100 x 1680 mm, weight 1000 kg, good condition Price ex location. Transport available at additional cost!

Condition: new, - NEW - Gedpfjwzmvbex Afcoua Concept 350 ELITE Partnership Edition - Cutting length 3200 mm - General Features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam, incl. LED lighting with 3 different indicator colors: WHITE: Machine in standby RED: Pressure beam lowering or emergency stop function BLUE: Saw unit in operation - Variable support table, 1,000 x 500 mm - Scoring system via main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, incl.: Saw blade holder, template holder, emergency stop button, start button, selector switch for grooving / scoring / sawing, feed speed rotary switch, switch for laser (option), and USB socket Partnership Edition includes: - Motorised rip fence with 4 aluminium stops, synchronized traversing All 4 stops travel up to 1,300 mm. Table length approx. 2,000 mm. - Windows 10 display control (10" touchscreen). The graphical interface offers the following functions: Tool database, mitre cut calculation at the length stop, Cutting plans can be created and saved, programs can be stored, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm, including 2 digital displays Technical Specifications: - Max. saw blade projection: 350 mm - Saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade diameter: 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm - Order No.: FIMAL379 Including: - Motorised rip fence with 4 aluminium stops, traversing up to 2,100 mm instead of 1,300 mm. Order No.: 47/17 - Cutting line laser Order No.: 3410451 - Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start Order No.: Programmable saw blade height adjustment incl. height correction when tilting the saw unit Optional accessories at extra cost: - Mitre stop +/- 50° tiltable with length compensation Order No.: 3380132 including telescopic stop and folding stop

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. Gedpeyw Ivhefx Afceua + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm Gusdoy A I Sgjpfx Afcoa - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25, 2 motors, with straight/chamfer cutting function - Pre-milling (rough trimming) 1,15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with several exchangeable trimming heads - Profile (radius-) scraping with exchangeable tool heads - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Buffing unit top/bottom ELECTRONIC CONTROL: - powerControl PC 22 OPERATING SYSTEM - woodCommander

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Gsdpfsy Ah Tkox Afcoua Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Guodpfx Afex Svm Rocea Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: new, Year of construction: 2026, functionality: fully functional, planing width: 530 mm, Houfek Planer-thicknesser SC 530 Standard configuration: Motor 5.5 kW (7.5 HP) Total length of planer tables SC 530 – 2,350 mm Simultaneously tilting planer tables Guide fence dimensions 1,300 × 150 mm Fence tilting angle 0°–45° Thicknesser table length – 1,000 mm Manual height adjustment of thicknesser table Mechanical numeric measurement of table position 4-point mounting of thicknesser table Split inlet pressure segments Grooved infeed roller Outfeed roller Min./max. workpiece thickness 3 – 250 mm 4-knife cutterblock D=120 mm Automatic star/delta motor start Feed speeds 6/12 m/min Electromagnetic brake Voltage 400V/50Hz Standard packaging in PE film Machine built according to CE electrical and safety standards Additional equipment (installed on this machine): Motor 7.5 kW (10 HP) for SC 530 Split grooved feed roller Tilting cover for cutterblock Tiltable auxiliary fence Motorised thicknesser table lift with two-speed motor Electronic position measurement of thicknesser table with digital display Cutterblock type "Tersa" for SC 530 mm Planed planer table Planed thicknesser table Gedpfx Aswvaqzefcoua

Condition: used, used Cleaned, function tested, trial run, partially overhauled Brand: Bäuerle Model: SFM Motor 4, 5.5 HP Motor with 2 speeds/pole-changing 6 speed levels: 2800 / 4500 / 6000 / 5600 / 9000 / 12000 Foot brake Right-left rotation Spindle diameter: 30 + 40 mm Table size: 1100 x 900 mm Wooden fence jaws new Belt new Milling fence with fine adjustment Space requirement approx. 1000 x 900 x 1000 mm Gujdpfx Afsy Ay Awocea Weight approx. 600 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is as inspected, without guarantee or warranty.

Condition: used, Year of construction: 2007, Make: NSM, Year of manufacture: 2007, 2 sliding tables, 4,000 x 2,200 mm, 3 belt conveyors, 800 x 7,000 mm, 2 robots, make Kuka, type KR 100-2 P2000, KRC2 control, hand programming terminal, type KSP2, 2 high-speed doors, PCB cleaning station, make Wandres Evomat, double sheet detection, make NSM, drawing media system, make Amtec, type PBS34/34, protective fencing system, control and switch cabinets Gujdpfx Aox R D N Rsfcja +++ Attention: This machine is part of an online auction! +++

Condition: used, Year of construction: 2014, with jointing cutter aggregate including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combination milling station with R 2.5 mm radius Technical description: - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing aggregates (Hebrock system) - Feed rate approx. 10 m/min - Adjustable cut depth for the end trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view windows from machine rear and operator side Guodpfxsyfp N Do Afcea - PLC control including touchscreen Technical data: - Feed rate 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on configuration, approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 unit Technical data: - Edge thickness from 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material - Ready for operation in 3 min - Air consumption approx. 800 l/min for the entire machine - Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw - Extraction as previously - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness) Including pneumatic saw adjustment Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius) Buffing station (polishing mop), 1 unit Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius Maximum workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm Flat scraper, 1 unit, with pneumatic insertion control Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath Special cleaning system for PU glue discharge underneath, 1 unit 60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Release agent sprayer, 1 unit Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Gusdpfoyyxkhsx Afcoa

Condition: ready for operation (used), Year of construction: 2014, Table saw manufactured in 2014. This Altendorf F45 features a sliding table length of 3000 mm and a cutting width of 1300 mm. It is equipped with a powerful 5.5 kW main motor and a maximum saw blade diameter of 550 mm. The machine includes a swivel-mounted control panel at eye level and a rip fence for precision cutting. If you are looking to get high-quality cutting capabilities, consider the Altendorf F45 table saw we have for sale. Contact us for more information. • Sliding table length: 3000 mm • Cutting width: 1300 mm • Max saw blade diameter: max. 550 mm • Main motor power: 5.5 kW (7.5 HP) • Main motor manufacturer: ATB • Operating voltage: 400 V • Frequency: 50 Hz • Current: 11.5 A • Phases: 3 • Control panel: swivel mounted at eye level • Scoring unit preparation: yes • Rip fence: included • Rip Fence Type: Manual adjustment on hard-chromed round bar • Rip Fence Display: DIGIT X (Electronic digital thickness display) Additional equipment Gjdpoywk H Ajfx Afcoua • AKE clamping system • Table extension: 840 mm • Angle mitre fence • DUPLEX fence (cutting length up to 1350 mm)

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS band saw Type BSB 600 Stand in modern steel construction, table top thick-walled, high ribbed cast iron massive grey cast iron band saw frames Gusdebzmb Hjpfx Afcja technology: - upper and lower PANHANS band saw blade guide APA II - finely planed cast iron table - swivelling table top up to 20 - dynamically balanced band saw blades with vulcanized rubber bandages - fence ruler can be used to the left of the saw blade - Fence profile can be folded down - blade tension indicator - mechanical height adjustment by hand wheel with locking pinion - automatic motor brake with main switch and motor protection switch technical data: - max. cutting height 380 mm - max. cutting width 570 mm - table size (BT) 590 x 810 mm - table height 905 mm - wheel-Ø 600 mm - engine power 2,2 kW - wheel speed 820 rpm - max. saw band length 4710 mm - suction nozzle-Ø 2 x 100 mm - machine weight 272 kg - machine size (LBH) 1120 x 750 x 2125 mm Location: ex stock Bitburg Top exhibition price Freely loaded

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Gujdpfx Asr Ig H Tjfcja Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Gsdpfxer Igzco Afcjua Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm Gujdpfx Aen Up R Ijfcoa

Condition: excellent (used), Pressure beam saw HOLZ-HER Cut 70 6110 -used- PC control with optimization, scorer unit, automatic cut length detection, side pressure device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical Data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, number of grippers: 6 pcs, max. saw unit feed: 0-70 m/min, max. rip fence feed: 25/70 m/min, main saw motor power: 11 kW, scorer motor power: 1.1 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, dust extraction port Ø below: 120 mm, dust extraction port Ø on pressure beam: 3 x 120 mm, nominal current largest consumer: 20.6 A, max. fuse: 35 A Quality Info: - Saw spindle newly mounted - Scorer newly mounted - Complete basic inspection - Complete basic cleaning Guodjyu N Rgjpfx Afcsa - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: V 474260, functionality: fully functional, operating hours: 1,580 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2,000 rpm, total length: 3,700 mm, total width: 1,950 mm, total height: 1,650 mm, overall weight: 1,250 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, Due to staff shortages or the closure of our joinery, we are selling our Martin T60 Classic panel saw with the following equipment: Guedeyx Iy Aepfx Afcea - Edging table length: 3700 mm - Cutting width: 1250 mm - Parallelogram cross-cut table T74! - Extendable support for parallelogram cross-cut table - Digital length stop T74 with 2-point contact and two stop elements - Second support for large panels - Parallel fence for the edging table, mountable on the second support - 3-axis scoring unit, electrically adjustable, T6027-a! - Infinitely variable speed control for the main saw blade, T6076-a! from 2000-5000 rpm - Extraction port upper D = 100 mm - Extraction port lower D = 120 mm - Manual eccentric clamp - DIN A4 document holder - 1 piece hold-down device and push stick - Approx. 10 pcs. carbide-tipped saw blades up to D=450 mm The machine is fully operational and can be thoroughly tested. A 1.6 t forklift is available for side loading onto a truck. Sale includes invoice plus 19% VAT, ex stock Essen.

Condition: used, Year of construction: 1994, power: 5.5 kW (7.48 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 95 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 4,000 rpm, total length: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We are offering this used SCM SI320 panel saw, year of manufacture 1994. If you have any questions or need more information, feel free to send us a message or give us a call. Unfortunately, the rip fence is missing. Gedpjyybqqsfx Afcsua