Used Felder Cf 731 for sale (133)

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, – Austrian production – year of production: 2005 – X-Roll carriage guide system – Operation manual DTR and CE TECHNICAL SPECIFICATIONS: – Carriage length: 2800 mm – Cutting width (right side): 1250 mm – Main blade diameter: max. 315 mm – Scoring unit diameter: 100 mm – Main motor: 4 kW – Scoring motor: 0.75 kW – Brake – X-Roll carriage guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Option for installing milling cutter, thickness: 6 - 20 mm – Max. diameter: 180 mm Dcsdpfx Aqjy Awwlovjp – Pawl – Moving guard – Dimensions (L/W/H): 300 / 195 / 170 cm – Weight: approx. 700 kg

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Dcodozuyh Iepfx Aqvsp Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Dcsdpozux Iasfx Aqvop Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: used, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Year of manufacture: 2022 Colour: Grey Dodezwul Hspfx Aqvjcp Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Thickness planer Felder D963 Max. planing width: 630 mm, Dsdpfjxdmu Tox Aqvscp Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition.

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Dcjdpfex A Exuox Aqvsp Weight: 750 kg Very good condition

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife Dcjdpjyf I T Usfx Aqvsp

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Dcedpfxoxbq Ule Aqvop Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Dimensions [mm]: 1660 x 1020 Dsdjy Agp Djpfx Aqvjcp Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox 4-spindle thickness table guide Electric thickness table adjustment Dcedoyzc Efopfx Aqvjp

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 Dcedpfjww Hhvox Aqvop The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: CA.03.013.12, operating hours: 1,555 h, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Dodeng H Uvopfx Aqvjcp Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 2 mm, height adjustment type: mechanical, actuation type: electric, overall weight: 300 kg, Equipment: CE marking, documentation/manual, – manufactured in Austria – year of manufacture: 2011 – DTR documentation available – unpainted – compact – takes up very little space TECHNICAL SPECIFICATIONS: – edge thickness: 0.4–2.0 mm – thickness of the workpiece: 10–50 mm – workpiece feed rate: 5.5 m/min – height to table surface: 880 mm – table dimensions: 1800 x 300 mm – support – total power: 2 kW – power supply: 400 V, 50 Hz – electronic adhesive temperature regulator: 20–250°C – compressed air pressure: 6 bar EQUIPMENT: – platen – belt feeder – guillotine – preliminary trimming – adhesive applicator – 3 pressure rollers – guillotine – belt trimming, front/rear – 2 milling units, top/bottom – overall dimensions (L/W/H): 2050/930/1280 mm Djdpfxjw H Rrwe Aqvecp – weight: 290 kg

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Dodpfewa Rlkox Aqvecp Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: like new (used), For sale is a like-new Felder FB-510 band saw with a cutting width of 480 mm. This demonstration machine is in its original condition, so you will receive the full warranty. Technical data: - Cutting width 480 mm - Cutting height 410 mm - Table size 640 x 500 mm - Table tilt -10° to +45° Dodpsznv I Refx Aqvocp - Blade length 4318 mm - Motor power 2.9 kW / 4 hp, 400 V version The band saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! For information, call 06244-20299. Related terms: band saw, saws, saw, band Reference: R-A0117

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm Dcsdpfow Hckrox Aqvjp - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 30B.11.040.22, functionality: fully functional, TECHNICAL DETAILS Working area, X-axis: 3,300 mm Working area, Y-axis: 1,280 mm Working area, Z-axis: 250 mm Travel, X-axis: 4,000 mm Travel, Y-axis: 1,670 mm Travel, Z-axis: 500 mm Milling spindle Number of milling spindles: 1 Max. spindle speed: 24,000 rpm Main motor power: 11 kW Tool clamping system: HSK-F63 Table design: Cantilever table Table length: 3,300 mm Table width: 1,280 mm Material clamping: Pneumatic Drilling unit Drilling tools available Horizontal drilling spindles: 4 Vertical drilling spindles: 12 Tool changer positions: 12 MACHINE DETAILS Controlled axes: 4 Software: WoodFlash Voltage: 400 V Current consumption: 40 A Connected load: 18 kW Dimensions & Weight Dimensions (L x W x H): 6,250 x 3,494 x 2,300 mm Shipping dimensions (L x W x H): 5,300 x 2,350 x 2,400 mm Shipping weight: 4,000 kg Shipping packages: 2 EQUIPMENT Sawing unit Vacuum pump Becker PICCHIO 2200, year of manufacture 2022 Safety light curtain Manual control panel Tools CNC documentation with user keys/licenses and USB stick Documentation CE marking Dedpfozrmuvjx Aqvscp

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 hp (5.5 kW) Motor voltage: 400 V (50 Hz) Planing width: 410 mm Planing cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg EURO standard safety guard Standard equipment Dcjdpfx Aeh Hp Hyjqvsp • Cutterhead with 410 mm planing width • Feed table with table length 1,080 mm • Fence with ruler 1,300 x 170 mm • EURO standard safety guard • 4-knife Felder system cutterhead Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg Dcjdpezkt Itefx Aqvsp EQUIPMENT Cutterhead with 410 mm planing width Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, Dsdey Sazrjpfx Aqvscp dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: Dsdpfjxxi T Uox Aqvscp - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm – Pro Gline carriage guides Dcsdpfjymz Ubsx Aqvsp – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut – Electric setting of cutting width on the right side – Automatic scoring unit advance – Extraction port diameters: 100 mm and 120 mm Transport dimensions: – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 250 mm, number of spindles: 16, TECHNICAL DETAILS Working area X-axis: 3,300 mm Working area Y-axis: 1,280 mm Working area Z-axis: 250 mm Travel X-axis: 4,000 mm Travel Y-axis: 1,670 mm Travel Z-axis: 500 mm Dodpfx Aeyux I Ujqvscp Number of horizontal drilling spindles: 4 pcs. Number of vertical drilling spindles: 12 pcs. MACHINE DETAILS Voltage: 400 V Current consumption: 40 A Power: 18 kW Number of transport packages: 2 EQUIPMENT Documentation CE marking HSK-F63 tool clamping system Drilling tool Saw unit

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, cutting length (max.): 3,000 mm, cutting height with scoring (max.): 40 mm, cutting width at rip fence: 1,250 mm, trimming length: 3,000 mm, Equipment: saw blade guard, - Austrian-made - With scorer Dcodpoxm Rm Sefx Aqvep TECHNICAL SPECIFICATIONS: - Table carriage length: 3000 mm - Max. main blade diameter (without scorer): 315 mm - Max. main blade diameter (with scorer): 250 mm - Blade bore diameter: 30 mm - Max. cutting height with 250 mm blade: 40 mm - Spindle lock - Main blade adjustable up/down and at an angle - Blade guard - With carriage - Cutting width at the fence: 1250 mm - Main motor: 4 kW - Fence with latch: 1700 / 2600 mm - Scorer - Max. scorer blade diameter: 80 mm - Scorer spindle diameter: 20 mm - Scorer motor: 0.65 kW - Extraction port diameter: 100 mm - Shipping dimensions (L/W/H): 325 / 190 / 130 cm - Weight: 500 kg

Condition: as good as new (ex-display), Code: N0249 Brand: HAMMER - FELDER - AUSTRIA Model: C 3 31 - CE Standard Universal 5-works combined machine - CE Standard Dcedpszqgdujfx Aqvop Planer width 310 mm Table length 1400 mm Helical planer spindle “Sylent Power” with reversible blades Thickness height 225 mm Circular saw unit tiltable 0-45° Cutting height 103 mm Scoring unit Aluminium carriage 2000 mm Spindle moulder unit diameter 30 mm – 4 speeds Motor power 4 Hp