Used Fans for sale (2,399)

Condition: good (used), Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower radial fan, double version without drive -Type: Fan wheel Ø 400 x 190 mm Ksdex Exnwjpfx Aa Eenf -Motor power: designed for 0.55 to 7.5 kW -Drive shaft: Ø 30 mm, V-belt pulley 2-groove Ø 335 mm see photos -Number: 3x blowers available -Price: per piece -Dimensions: 1470/600/H690 mm -Weight: 65 kg/unit

Year of construction: 2018, condition: used, Power: 3 kW (4 HP) Manufacturer: Tama Aernova ATEX model: Kompac Air - Atex Zona 22 Year: 2018 Ksdpfx Ajx Akd Aja Eenf Type: Cartridge filter Atex: Ex II 3 D Ex h IIC T200°C Dc Cleaning system: compressed air Turbo SRL pressure tank - Max pressure: 8 bar - Capacity: 22.7 L Motor power: 3 kW - 3000 rpm CORAL extraction fan unit: Model PRVM450 (ATEX) Year: 2018 Power: 3 kW Capacity: 1776 m3/h Speed: 3000 rpm   Filters not included with the machine. -> Supply of new consumables: this service may be subject to an additional quote.

Condition: used, Year of construction: 2021, functionality: fully functional, • Machine Type: Industrial Filtration and Extraction System • Product Designation: Filter Unit PPF25-1422vi ATEX & HPRec-A325 • CE-certified: Yes (CE marking visible on the nameplate) Manufacturer • Manufacturer: HEAB Absaugtechnik GmbH • Manufacturer Address (as stated on the nameplate): Quarzring 2, 04600 Altenburg, Germany Part 1: Identification • Model designation: PPF25-1422W ATEX • Serial number: 2021046 • Year of manufacture: 2021 (05/2021) Electrical Data (nameplate) • Motor power: 11 kW • Supply voltage: 3Ph / N / PE, 400 V • Frequency: 50 Hz Fan and Performance Data (nameplate) • Fan type: KHLE 17-450-5V-11-2-R0 • Airflow rate (AP): 4,000 m³/h • Maximum negative pressure: 1,500 Pa Filtration System (nameplate) • Filter area: 163 m² • Filter type: 3 × 225 × 600 mm 22 × 225 × 1,400 mm Explosion Protection (nameplate) • ATEX classification: ATEX • Explosion protection marking: Ex • Maximum housing overpressure: 0.2 bar (gauge) • Explosion pressure relief device: Type: High-speed venting VN735 Part 2: Model: HPrec-A325 Machine type: Filter unit Year of manufacture: 05/2021 Serial number: 2021044 Technical Data / Specifications Motor power: 0.37 kW Electrical connection: 400 V / 50 Hz / 3 Ph / N / PE Fan type: VT500 O2 Speed: 2,800 rpm Airflow rate (AP): 400 m³/h Max. negative pressure: 1,000 Pa Kjdpfx Aaex Iul Dj Ejnf Filter media: Pre-coating material: Limestone powder Filling volume: 75 kg (3 x 25 kg) Compressed air supply: 6 bar (dry and oil-free)

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Knjdpfx Aoxlt Ebja Eof

Condition: refurbished (used), operating hours: 8,000 h, FULLY OVERHAULED-----READY TO WORK, HAMMEL 750 E - Power 2 x 110 kW electric - with long discharge conveyor Knodpfxsx E T E Re Aa Eof The following work has been done: - 2 pieces hydraulic motors were overhauled - 2 pieces hydraulic pumps were overhauled - new cooler fan installed - neu rubber belt for the conveyor installed - new drive drum for the conveyor installed - Service done with oil change The machine can be seen in working condition on our site at D-59329 Wadersloh.

Condition: used, mileage: 740,041 km, power: 338 kW (459.55 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, color: white, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN 18.460 TGX XXL * First registration: Apr./2019 * Wheelbase: 3,600 mm Kodpfxex Ixyro Aa Ejnf * Front leaf suspension * Stationary air conditioning * Tires: 20-30% tread remaining * 2 x Fuel tank: 580 L diesel + 60 L * Refrigerator box * 2 x sleeping bunks * German vehicle Aero kit, exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, 225 Ah battery, 24V trailer battery connection, mechanical battery isolation switch, front bumper trim chromed, kerb mirror on the right electrically adjustable and heated, CB radio roof antenna, ETA circuit breaker, cab: electro-hydraulic tilting mechanism, cab: with air suspension, driver seat comfort version, air-suspended and heated, with lumbar support and shoulder adjustment, brake lever - EVBec regulated, fuel tank: combination aluminum tank - 580 L diesel + 60 L urea solution (AdBlue), multifunction leather steering wheel, air compressor 1-cylinder 360 ccm with Air Pressure Management (APM), heated air dryer, Eberspächer D4S auxiliary air heater, sound system, 12V and 24V sockets in cab, cab door extensions, additional high/low beam and fog lights with cornering function, additional heated fuel filter with water separator Additional equipment: Axle configuration: 4x2, ambient lighting, starting/front mirror, trailer socket 24V / 7-pin, ABS trailer socket, anti-slip regulation (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, on-board computer MAN-Tronic, rear axle differential lock, MAN Brakematic electronic brake system, EURO 6 engine, cab: Nordic insulation, cab: XXL, suspension: leaf/air, electric window lifts, remote central locking, tinted windshield, 28V 80A alternator, 16-speed transmission - type: ZF 16 S, body/chassis: tractor unit, brake lever - EVB, automatic climate control, heated fuel filter, raised air intake, engine: 12.4 L – 338 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side-mounted spare wheel holder, fifth wheel: Jost JSK 37 C, rear axle disc brakes, front axle disc brakes, rear side windows tinted, seat cover/upholstery: comfort grade, sunblind for side window, driver’s door, spray suppression, one rear axle stabilizer, front axle stabilizer, externally accessible toolbox, TGX, door windows tinted, viscous fan, central locking, gross vehicle weight rating: 18.00 t

Condition: good (used), Radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, ventilation blower -Manufacturer: Fischbach, Radial fan extraction blower type SD5-640/ E 351-4 Knjdpfjqmt Arox Aa Ejf -Motor power: 0.95 kW -Volume flow rate: 0- 3210 m³/h -Air duct connection: 290 x 145 mm -Number: 4x blowers available -Price: per piece -Dimensions: 420/340/H365 mm -Weight: 16.6 kg

Year of construction: 2009, condition: used, Power: 2 kW (3 HP) Fabricant : WAM Modem ATEX : FPXHTD12VA1498 Kjdpox Akawefx Aa Eenf Year : 2009 Type: Atex horizontal dust filters ATEX: ExII3D135°C(T4) Suction fan: 2.2 kW Separation type: Filter sleeves Filtration surface area: 12 m² Purging solenoid valve   Filters not included with the machine. -> Supply of new consumables: this service may be subject to an additional quote.

Condition: used, total height: 3,300 mm, total width: 1,850 mm, total length: 3,450 mm, Empty weight: 2.000 kg Extraction installation ModestaCapacity +/- 15,000m³/h Extractor fan 18.5 kW Connection diameter 500mm Transport fan 7.5kW Electric knocking system (vibrator) Filter bags Filter bags 72 pieces Filter length 1950mm Filter diameter 200mm There is no door for filter items. Transport dimensions: 3450x1850x3300mm (LxWxH), + 2x pallet Weight +/- 2000kg - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 72 - Filter length [mm]: 1950 - Filter diameter [mm]: 200 - Connection diameter [mm]: 500 - Main fan power [kW]: 18.5 - Control cabinet present: No - Shaking system: Yes - Collection bins: No - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 7.5 - Transport dimensions: 3450mm x 1850mm x 3300mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ksdpfxswnh Aps Aa Eonf Yorick Diebels

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Knsdpfxjvviyto Aa Eof

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Knjdpfsx H Aa Tsx Aa Esf Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer.

Condition: used, mileage: 80,000 km, power: 331 kW (450.03 HP), first registration: 03/2022, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, navigation system, traction control, trailer coupling, = Additional options and accessories = - Rear view camera - Addaptive cruise control - Aluminium fuel tank - Central lubrication system - Central door locking - EBS - Electric windows - Extra steering axle - Hydraulic grab arm - Bonnet turn signals - Lane departure warning system - Air suspension - Multifunctional steering wheel - PTO - Radio/CD player - Disc brakes - Speed limiter - Stability control - Power steering - Extendable bumper - Catch jaw - Drive-away assistant - Sun visor = Special features = CHW10 DAF CF 450 FAN 6X2 axle with HYVA Loader 20-53-S chassis XLRASM4100G372217 Wheelbase total : 5600 mm Axle 1-2 : 4200 mm Axle 2-3 : 1400 mm Hook loader: Hyva 20-53-S. H= 1450 L = 5930mm = More information = Drive Tank capacity: 340 litres Transmission Transmission: TRAXON 12T2210, Automatic Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65 R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: parabolic suspension Rear axle 1: Tyre size: 315/80 R22.5; Twin tyres; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right inner: 50%; Tyre profile right outer: 50%; Suspension: air suspension Rear axle 2: Tyre size: 385/65 R22.5; Lift axle; Max. axle load: 7400 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: air suspension Dimensions Dimensions (LxWxH): 801 x 250 x 335 cm Kjdpfx Asutug Aea Esnf Weights Empty weight: 10,525 kg Load capacity: 15,400 kg GVW: 26,000 kg Functional Pump: Yes Financial information Price: On request Identification License plate: CHW10

Condition: excellent (used), Electric motor, three-phase motor -Condition: unused -Power: 5.5 KW -Speed: 2840 rpm -Shaft: Ø 28 mm -Design: B3/B5 -Protection rating: IP 54 -Flange recess: 180 mm -Flange hole circle: 215 mm -Flange outside diameter: 250 mm -Foot holes: 190 x 140 mm -Price per piece -Pieces: 21x available AEG -Pieces: 18x available ECO Air -Piece: 25x available ECO Air without fan wheel Knodpfxjb A Slij Aa Ejf -Dimensions: 370/270/H250 mm -Weight: 30kg

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Knsdpfxox Ihiio Aa Esf Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2008, 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Knsdpfx Aswiwpzea Ejf Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Capacity [m³/h]: 80000 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 72 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Nominal airflow [m/s]: 22 - Extinguishing system: Yes - Disassembled: Yes - Control cabinet present: Yes - Shaking system: Yes - Extraction: Underpressure installation Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Knedpovxk Anefx Aa Eef Storage location: Nattheim

Condition: excellent (used), Year of construction: 2014, Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil Ksdpfx Aaeghh Txo Ejnf -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* Knedpfx Aox Ihg Ioa Eof - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2002, total height: 2,900 mm, total width: 1,500 mm, total length: 4,300 mm, - Year: 2002 - Documentation available: No - CE certificate present: No - Capacity [m³/h]: 5500 - Number of filter bags [pcs]: 48 - Filter length [mm]: 2000 - Filter diameter [mm]: 230 - Filter surface area [m²]: 73 - Connection diameter [mm]: 310 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 4.0 - Extinguishing system: Yes - Disassembled: Yes - Control cabinet present: Yes - Collection bags: Yes - Number of bins/bags [pcs]: 3 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 4.0 - Transport dimensions: 4300mm x 1500mm x 2900mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Knjdpfxow Hcd Ss Aa Esf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. Kodpfxsx Ig Tte Aa Esnf The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-4E Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2006, - Year: 2006 - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 32 - Filter length [mm]: 2000 - Filter diameter [mm]: 230 - Connection diameter [mm]: 300 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Shaking system: Yes - Collection bins: Yes - Number of bins/bags [pcs]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Knedpfx Aowniflsa Eof Yorick Diebels

Condition: used, total height: 2,400 mm, total width: 650 mm, total length: 2,350 mm, - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 3 - Filter length [mm]: 1250 - Filter diameter [mm]: 50 - Filter surface area [m²]: 1 - Connection diameter [mm]: 220 - Main fan [pcs]: 1 - Voltage [V]: 400 - Power [kW]: 3.7 - Transport dimensions: 2350mm x 650mm x 2400mm (l x w x h) Kedpfxexrtk Ds Aa Eenf - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, total height: 2,360 mm, total width: 2,100 mm, total length: 1,230 mm, - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 30 - Filter length [mm]: 1740 - Filter diameter [mm]: 210 - Connection diameter [mm]: 260 - Main fan [pcs]: 1 - Main fan power [kW]: 4.0 - Control cabinet present: Yes - Shaking system: Yes - Collection bins: Yes - Number of bins/bags [pcs]: 2 - Transport dimensions: 1230mm x 2100mm x 2360mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Knodpfswnic Rex Aa Esf Yorick Diebels

Condition: used, Extraction system Modesta Capacity +/- 18,000m³/h Chain transport with lock Complete with switch box Exhaust fan 22 kW Transport fan 5.5kW Filter bags in good condition Filter bags 160 pcs Filter length 2400mm Filter diameter 200mm Dry extuingisher pipeline. Transport dimensions: 6500x2450x3250mm (LxWxH), + 4 loading meters of loose parts. Weight +/- 4000kg Set up dimensions 6500 x 2500 x 3950 mm (L x W x H) Kedjwnhahepfx Aa Eonf - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 160 - Filter length [mm]: 2400 - Filter diameter [mm]: 200 - Main fan power [kW]: 22.0 - Extinguishing system: Yes - Control cabinet present: Yes - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 5.5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Extraction installation Riedex MD-300L Connection diameter 300mm Filter Bags 2000x200mm, 48 Pieces Capacity 6000m³/h Electric shaking motor Including transport fan 4kW Overall dimensions: 2000x3000x3600mm (LxWxH) - Year: 2007 - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 48 - Filter length [mm]: 2000 - Filter diameter [mm]: 200 - Connection diameter [mm]: 300 - Shaking system: Yes - Collection container: Yes Knedpfx Aajwng T Tj Esf - Transport fan included: Yes - Transport fan power [kW]: 4.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels