Used Fans for sale (2,454)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. Cedsyug Hxspfx Ac Tohb The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output Chsdpjyug R Refx Ac Tjb • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, mileage: 464,839 km, power: 355 kW (482.67 HP), first registration: 04/2022, fuel type: diesel, empty load weight: 10,280 kg, maximum load weight: 15,720 kg, overall weight: 26,000 kg, axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, Equipment: air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, trailer coupling, Unladen weight: 10,280 kg, gross permitted weight: 26,000 kg, fabric seats, interior color white, air suspension, steered lift axle, intarder, digital tachograph, BDF swap body system, Electronic Braking System (EBS), Electronic Stability Program (ESP), stationary air conditioning, Adaptive Cruise Control (ACC), comfort seats, air-suspended driver’s seat, armrest driver/passenger, seat heating, LED headlights, radio, audio interface, lane keeping assist, leather steering wheel, power steering, electric windows, outside temperature display, electric external mirrors, kerb mirror, wide-angle mirror, tire pressure monitoring system, central locking, underrun protection, sun visor, self-steering axle, refrigerator box, hill start assist, daytime running lights, cup holder, information and service system, speed limiter, emergency brake assist, storage box, upper and lower bed, vehicle location: 01471 Radeburg. Errors and changes excepted. Csdoyx R Nyspfx Ac Tohb

Condition: used, Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Chodjy D Nicspfx Ac Teb Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: used, This listing is for the Transmed Sahara 111 Maxitherm Blood Warmer. The unit is in full working condition and ready for immediate use. High-performance dry-heating system designed for safe warming of blood products, plasma, and infusion solutions while reducing contamination risks in sterile clinical and laboratory environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished) Chsdpoy R U R Sefx Ac Tjb

Condition: new, ZIEHL-ABEGG FB05D-VDQ 4I V4S Function: Motor control unit for fans and ventilators Technology: Integrated frequency inverter for speed control Application areas: HVAC systems, ventilation systems, industrial fans Cjdpoy Suxljfx Ac Tehb Advantages: Energy-efficient Quiet operation Precise air flow control All information is provided without guarantee.

Condition: used, CNC lathe GILDEMEISTER, type GD 160 with Gildemeister - Fanuc Mate TS control - Power chuck BERG, Ø 200 mm - 12-station tool turret, VDI 40 - 6 tool holders VDI 40, installed Machine footprint with chip conveyor: L x W x H 4200 x 2200 x 2100 mm Weight: approx. 4 tons We are making room Affordable machine – ideal for export Codpfxsy T R Irj Ac Tehb

Condition: ready for operation (used), Year of construction: 2017, pressing force: 51 t, stroke length: 300 mm, overall weight: 4,750 kg, number of axes: 4, This full electric SAFAN E-Brake B 50-2050 was manufactured in 2017. It features a maximum pressing force of 500 kN and a bending length of 2050 mm. The machine includes a programmable backgauge with a maximum stroke of 550 mm and a robust weight of 4750 kg. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake B 50-2050 press brake we have for sale. Contact us for further details. • Control unit: EC 20 • Q-dimension: 650 mm • Upper beam stroke: 300 mm • Speeds: • Approach: 110 mm/s • Bending: 10 mm/s • Bending with light curtain: 10 mm/s • Return: 110 mm/s • Backgauge: • Maximum stroke: 550 mm • Maximum speed: 350 mm/s • Programmable axes: X, R • Mechanical axes: Z1, Z2 Chedjzdkvzopfx Ac Tjb • 4 fingers • Tool clamping: • Upper: European Style adapter • Lower: OB-S-3 table with mechanical clamping • Front supports: Standard, load capacity 25 kg each • Safety: • Light curtain: 28.5 mm gap, programmable, vertical, fixed • Stopping time of upper beam: < 92 ms • Minimum safety distance: 185 mm • Electrical: • Power supply: 3 × 400 V / 50–60 Hz / N / PE • Installed power: 11 kW Advantages • Full electric drive • Up to 30% higher productivity • Up to 50% energy saving • No harmful hydraulic oil, low CO2 emissions • Noiseless operation Technical Specification Bending Length 2050 mm

Condition: ready for operation (used), Year of construction: 2019, pressing force: 82 t, stroke length: 300 mm, overall weight: 7,000 kg, number of axes: 4, This full electric drive SAFAN E-Brake Premium 80-2550 was manufactured in 2019. It features a pressing force of 80 tons and a bending length of 2550 mm, ensuring robust performance for various applications. The machine is equipped with a maximum stroke of 300 mm and a backgauge with 4 fingers for enhanced precision. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake Premium 80-2550 press brake we have for sale. Contact us for further details. • Power supply: 3 x 400 V, 50/60 Hz, N/PE • Connected load: 11 kW • Axis configuration: 4 CNC axes (Y1, Y2, X, R) • Manual Z-axis adjustment • Backgauge with 4 fingers • Condition: Very good, fully operational, regularly serviced and maintained • Note: Tooling is not included • No crowning needed Codpezd Uv Sefx Ac Tehb • Manual, quick-release tool clamping system Promecam Advantages • Full electric drive • Up to 30% higher productivity • Up to 50% energy saving • No harmful hydraulic oil, low CO2 emissions • Noiseless operation • Full working length backgauge Technical Specification Bending Length 2550 mm

Condition: used, power: 120 kW (163.15 HP), first registration: 08/2012, fuel type: diesel, color: orange, empty load weight: 5,990 kg, driver cabin: other, gearing type: other, Year of construction: 2012, operating hours: 4,850 h, number of seats: 2, * Compact sweeper CLEANGO, standard configuration for Germany, 50 km/h * Speed 50 km/h * Disc brakes on the front axle with dual brake calipers * Proportional parking brake * Load-dependent valve on the rear axle (required for all 50 km/h machines) * Driver's seat with air suspension * Seat belts * Radio with USB and SD card connection * Heated exterior mirrors * Additional work mirror * Colored rear view monitoring system with TFT monitor * Air conditioning * Tachograph * Cup holder * Independent control of the rotary brush (raise/lower, ground pressure, inclination) * Third front brush Cleango 500 * Weed brush for the 3rd brush * Additional work light (for the 3rd brush) * Suction nozzle with rubber insert * Suction pipe with rubber insert * Preparation for subsequent installation of the hand suction hose * Water return system Cleango 500 * Container door with high and low-level water drain valves (top and bottom) * Water filling hose, Germany * Standard paint RAL 2011 municipal orange * Noise reduction package (only for exhaust fan) * Automatic central lubrication system instead of manual central lubrication * Protection for the rotating beacon * Oil service and maintenance performed at 4,850 operating hours Other: * Trade-in and purchase of vehicles and machines possible. Csdpfx Aezcfzwsc Tohb * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer is non-binding. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,011 h, functionality: fully functional, total length: 16,000 mm, total width: 3,000 mm, total height: 3,600 mm, overall weight: 40,600 kg, power: 360 kW (489.46 HP), Doppstadt DW3060K Büffel/Biopower/Type F/Selector HS-514/Shredder/Crusher/Industrial Shredder • Manufacturer: Doppstadt • Type: DW3060K Büffel • Year of Manufacture: 2018 • Operating Hours: 8011 hrs • Power: 360 kW/489 hp • Industrial Shredder • Engine: Mercedes Benz MTU OM471LA(6R 1300) EUROMOT IV, 6-cylinder diesel • Pneumatic spiral fan • Fuel tank: 2 x 300 liters • AdBlue • Telematics system • Crushing roller, size M • Length: 3 meters • Diameter: 80 cm • Tooth width: 7.4 cm • Tooth height: 8.5 cm • Number of teeth: 125 pieces • Throughput: 20-60 t/h, depending on the material • Magnetic belt • Track system: Strickland 335713-DK40-AA • 2 travel speeds • Loading height: 3.10 meters Chjdjzimm Hepfx Ac Tob • Remote control • Central lubrication system • Transport length: 16 meters • Transport width: 3 meters • Transport height: 3.60 meters • Total weight: 40,600 kg • German machine • Ready for immediate use _____ Selector HS-514/Star screen with return conveyor • Screen size: 8-10 cm • 13 star shafts • Integrated support legs • The attachment is picked up by the machine and driven via the auxiliary hydraulics • Star shafts are reversible • Reversing mechanism: Hydraulic • Return system for larger materials • Discharge height: 3.10 meters • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC Laser Cutting Machine TruLaser 3030 (L20) 5000 Watt X Working area max.: 3000 mm Y Working area max.: 1500 mm Z Working area max.: 115 mm Csdpfx Acszix Ups Tjhb Control system: Siemens Sinumerik 840D SL Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit - Automatic pallet changer in longitudinal direction - 17" touch color screen - Longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet metal outer edge detection - Lens with RFID chip Control system - Control system SINUMERIK 840D SL - Simple operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panels - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment, and LensLine with automatic condition monitoring) - CoolLine - Extended pallet entry - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: used, Water Cooler with 8 axial fan. Pressure tested, ready to use. Located Locally in: Hungary (EU) Csdezhgy Depfx Ac Tohb

Condition: ready for operation (used), Axial Fan Condenser Water Cooler Pressure tested, ready to use. Located locally in: Hungary (EU) Codpozhg Izjfx Ac Tohb

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Chodpfx Ajzizz Sec Tob Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, Used Spinner Robobox, used to automate the loading and unloading of Spinner lathes with plastic components. Fanuc M10iD 6-axis robot, 1420 mm reach, 12 kg gripper unit. Barely used. Dual gripper, 5 drawers 800 x 600 mm (3 x 150 mm, 2 x 200 mm height). Chjdpfx Acozi Elhe Tsb Safety scanner. Note: Hard drive needs to be replaced.

Condition: good (used), Fan model: HPB-F-040-300T Motor model: SKh90-2S2 Latest use: Air cushion table External dimensions: Width: 700 mm. Depth: 450 mm. Codpoyz Tc Iefx Ac Tshb Height: 450 mm. Weight: approx. 20 kg. Condition: good, second-hand

Condition: used, Year of construction: 2003, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Cjdpfxsywd I To Ac Tehb Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall cabinet.Designed for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Cedpfx Acoy N Duqe Tehb Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Year of construction: 2019, mileage: 119,724 km, power: 265 kW (360.30 HP), first registration: 08/2019, overall weight: 18,000 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, next inspection (TÜV): 09/2028, gearing type: mechanical, emission class: euro6, loading space volume: 9 m³, Equipment: ABS, air conditioning, Internal vehicle number: G400114 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 1836 4x2 Road Sweeper Nothhelfer KOBIT K8 | 8.8 m³ | Euro 6c For sale is a used Mercedes-Benz Arocs 1836 4x2 road sweeper with a Nothhelfer KOBIT K8 body, manufactured in 2019. The vehicle features a 360 hp diesel engine, manual transmission, and air conditioning. The sweeper body offers a capacity of 8.8 m³. The operating hours of the fan, high-pressure pump, and water pump are documented separately. Vehicle technical data: * Manufacturer/Model: Mercedes-Benz Arocs 1836 * Vehicle Type: Road Sweeper * First Registration: 08/2019 * Year of Manufacture: 2019 * Mileage: 119,724 km * Engine Operating Hours: 11,408 hours * Power: 265 kW (360 hp) * Displacement: 10,677 cm³ * Fuel: Diesel * Transmission: Manual * Emission Standard: Euro 6c * Environmental Badge: 4 (Green) * Axles: 2 * Wheel Arrangement: 4x2 * Permissible Total Weight: 18,000 kg * Unladen Weight: 14,980 kg * Payload: 3,020 kg * Air Conditioning * Color: Yellow * MOT (Technical Inspection): New * Vehicle Number: G400114 * Condition: Used * German Vehicle Technical data of the road sweeper body: * Road Sweeper Body Nothhelfer/KOBIT K8 * Suction sweeper body for roads and paved areas * Dirt container: approx. 8 m³ Chedpfx Asy I Hfiec Tjb * Standard water tank, depending on the version: approx. 3,300 - 3,600 liters * Maximum water volume, depending on the configuration: approx. 4,300 - 4,600 liters * Working width: approx. 2,300 - 2,500 mm * Body drive via a separate auxiliary engine * Sweeping unit between the axles * Suction, spray, and brush system * Water spray for dust suppression in the brush area and in front of the sweeping unit * Suitable for collecting fine dust, sand, leaves, gravel, and larger debris * Body manufacturer/version: Nothhelfer/KOBIT * Engine hours: 11,408 hours * Fan operating hours: 4,208 hours * High-pressure pump operating hours: 2,973 hours * Water pump operating hours: 761 hours Inspection and functional testing are possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2018, mileage: 88,863 km, power: 170 kW (231.14 HP), first registration: 06/2018, overall weight: 15,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 09/2028, gearing type: mechanical, emission class: euro6, loading space volume: 6 m³, Equipment: ABS, air conditioning, Internal vehicle number: G400141 Available immediately at our location in Kaufungen. Chsdoy I Hfpspfx Ac Tjb More information: Luis Lucena Viktoria Sologubova GERMAN Mercedes-Benz ATEGO 1323 4x2 Sweeper Truck, Bucher Cityfant 6000 German municipal vehicle with a Bucher-Cityfant-6000 street cleaning superstructure, a 6 m³ stainless steel waste container, a separate JCB superstructure engine, and extensive safety and comfort features. Vehicle data: * Vehicle number: G400141 * Vehicle condition: Used * Category: Sweeper truck / Municipal vehicle * First registration: 07.06.2018 * Year of manufacture: 2018 * Mileage: 88,863 km * Fuel type: Diesel * Engine displacement: 5,132 cm³ * Power: 170 kW (231 hp) * Transmission: 8-speed manual transmission * Emission class: Euro 6c * Environmental badge: 4 (Green) * Wheel arrangement: 4x2 * Axles: 2 * Permissible total weight: 15,000 kg * Unladen weight: 9,150 kg * Payload: 5,850 kg * Color: White * Seats/doors: 2/2 * MOT: New upon purchase * Inspection (SP): Due 01/2027 * 1 Previous owner Dimensions: * Length: 6,400 mm * Width: 2,550 mm * Height: 3,300 mm Street cleaning superstructure: * Manufacturer: Bucher Municipal AG * Type/Commercial name: Cityfant 6000 * Serial number: SEQ 8869 * Year of manufacture: 2018 * Waste container: 6.0 m³ * Stainless steel waste container * Container tilt angle: approx. 55° * Stainless steel dirt slide * Inspection flaps on the left and right * 4-inch wastewater drain * Waste drainage * Air shut-off valve on the suction hose * A-coupling on the air guidance screen * Multi-stage, pneumatically operated support strut * Exhaust routing through the container superstructure Superstructure engine and sweeping technology: * Separate JCB superstructure engine * Engine type: 444-TA4-55 * Superstructure engine power: 55 kW * Separate fuel tank for the superstructure engine: 150 liters * Stepless engine speed control * Hydraulic fan drive * Hydraulically driven roller and disc brush * Coated steel suction nozzle * Suction hose diameter: 250 mm * Swiveling tail wheels * Automatic lifting of the sweeping unit when reversing * Work lights on the sweeping unit Recorded operating data of the superstructure: * Operating hours superstructure engine: 309 hrs. * Operating hours superstructure: 416 hrs. * Operating time sweeping unit: 335 hrs. 35 min. * Operating time disc brush: 316 hrs. 27 min. * Operating time roller brush: 85 hrs. 41 min. * Operating time suction blower: 334 hrs. 09 min. * Documented sweeping distance: 4,189 km * All values according to the Bucher control terminal display Water system and operation: * Stainless steel water tank: 1,900 liters * Water level indicator * Bucher Municipal instrument panel * 7-inch color display * Multifunction display * Standard control panel * Cable remote control * Warning lights and rotating beacons Chassis and equipment: * Right-hand drive * Air conditioning * Driver's air-suspended seat * Electric windows * Electrically adjustable exterior mirrors * Additional thermal insulation * Radio * Cruise control * Active Brake Assist * Lane keeping assistant * ESP * Differential lock on the rear axle * Engine brake * Speed limiter * Reversing warning * Daytime running lights * Fleetboard vehicle computer * Short ClassicSpace cab * Parabolic suspension at the front * Front axle 5.3 t * Pre-wiring for third-party superstructure electrics * Rotating beacons * Steel rims Tires: * Tire size: 10 R 22.5 * Axle: Aeolus, tread depth approx. 13 mm * Axle: Pire

Condition: excellent (used), Year of construction: 1983, Longitudinal Flow Dryer – Heating via Electricity or Hot Water Internal chamber length approx. 4500 mm Internal chamber width approx. 750 mm Internal chamber height approx. 600 mm Chamber volume 2.0 m³ Top loading – trunk design Manual / fully automatic control Electronic controller type C Longitudinal ventilation Chodpjy Emqgsfx Ac Teb Number of fans: 1 Fan motor power 0.55 kW, 400 V, 50 Hz Electric heater: 4.2 kW INCLUDES: Aluminum stacking strips Wood moisture measuring probe Operating manual, electrical diagram, etc. Space requirement approx. 5600 mm x 1200 mm x 1600 mm Weight: 400 kg Note on used machinery: • Technical data subject to errors and prior sale. • Quoted prices are ex-location – free loading! • Machines have been cleaned and function tested. • All machines are bought as inspected, without any warranty claims. Buyers are free to inspect the machines on site. • Special agreements only valid in written form. (We will respond to inquiries only if your address and telephone number are provided!)

Condition: new, mileage: 11 km, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Additional options and accessories Engine * MX-Engine brake * Fuel tank capacity tank 2: 620 * Number of fuel tanks: 2 Interior * Central locking * Electric mirror control Chjdpfx Acozgqcao Tsb * Heated seats * Rear view camera * Stationary air conditioning * Tachograph: digital * Air-suspended seat Lighting * Headlight type: LED Safety Systems * ESP * Forward collision warning * Lane departure warning Superstructure * Trailer coupling More information Transmission: 12 gears, Automatic Cab: XG Tyre size: 315/70 R22.5 Brakes: disc brakes Rear axle 1: Lift axle, Steering Wheelbase: 505 cm Number of seats: 2 Number of berths: 2 Dealer information As the largest German DAF dealer, we are proud to offer the entire product range of the Dutch manufacturer in the Ruhr area and the Cologne area, and to contribute to this success. Our goal is to relieve you of as much work as possible regarding vehicles and day-to-day operations. This includes the product itself, the related services, and, not least, the human interaction. Let our advice and service convince you. Our team will be happy to assist you. With our four centrally located sites, we cover a large part of North Rhine-Westphalia and are easily accessible. We would be happy to visit you, or you can take the opportunity to visit us at our sales locations in Dortmund/Cologne. We always have a large selection of new vehicles available for quick delivery. Our new vehicle warehouse alone includes a constant selection of 70 to 100 vehicles – a real highlight in the market. Visit us at or call us on

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 Chsdpfozwdn Dex Ac Tsb -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: used, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, first registration: 07/2024, emission class: euro6, Year of construction: 2024, Equipment: air conditioning, parking heater, Vacuum Superstructure: Tested quality directly from the manufacturer 6-month warranty 1 year / 500 operating hours maintenance-free Operating hours of the fan: 652 hours Operating hours of the compressor: 670 hours Standard equipment: MTS vacuum superstructure MTS double fan MTS material separation system (patented) Automatic filter cleaning, compressed air compressor 4.5 m³/min, 8 bar POWERARM with 7m suction hose 3 stabilizing supports PLC control with optional remote diagnostics Wireless remote control (brand: Gross Funk) Storage space Module options: Container & lid with stainless steel lining Stainless steel toolboxes EVO-POWER ARM Cjdpfxezvw U Uj Ac Tshb Rotary suction pipe system IKE/PERFOR Suction & drive & steering HYDROSTAT Electric steering Volvo Full cladding DESIGN High-tipping system HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment: Industrial Package II: Gas sensor Infinitely variable speed control for the fan Filtration unit for the oil circuit Environmental equipment: Hydraulic oil biodegradable Noise reduction package: Sound insulation of the container exterior Accessories - Module Container with 2 pneumatic vibrators Access ladder for the machine housing (2x) Ladder under the hose rack Accessories - Lighting Lighting Package II: 2 LED lights on the center joint of the POWERARM Lighting Package III: LED light strips in the toolbox Lighting Package V: LED lights next to the POWERARM shaft Lighting Package VII: Fire brigade lighting 2x Lighting Package VIII: Light bar at the rear Accessories - Safety 4 warning lights Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance Subject to errors and prior sale. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.