Used External Thread for sale (7,885)

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version Hfodpfx Apsyrty Te Een ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Year of construction: 2001, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 180 mm DISTANCE BETWEEN CENTRES: 1600 mm MAX GRINDING LENGTH: 1100 mm MAX ADMITTED LOAD: 150 Kg GRINDING DIAMETER: 300 mm X-AXIS TRAVEL: 350 mm Z-AXIS TRAVEL: 1250 mm GRINDING WHEEL SIZE: 610 x 120 x 203,2 mm MOTOR POWER: 11 kW CONTROL UNIT: FANUC 18i0 TA WEIGHT: 8400 Kg OVERALL DIMENSIONS: 3380 x 2200 x 1800 mm ACCESSORIES: PAPER FILTER ; Hfodpfxjyry Rxs Ap Esn PORTABLE HANDWHEEL NOTE: GRINDING WHEEL AUTOMATIC DYNAMIC BALANCER; ARTICULATED SUPPORT FOR GRINDING WHEEL CHANGE; GRINDING WHEEL FORMING SYSTEM; CUTTING IN AIR DEVICE; MARPOSS UNIMAR DIAMETRAL AND AXIAL HEAD

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Hedpfx Asyhd Imop Eofn Specifications: Power: 11 kW

Condition: used, turning diameter over cross slide: 390 mm, spindle bore: 82 mm, turning diameter over bed slide: 650 mm, overall weight: 3,000 kg, spindle mount: MK 5, Conventional Lathe Brand: Geminis Model: GE 650 Power: 12.5Hp Distance between centers: 2,000mm Hedpjyc Rucofx Ap Eofn Maximum swing over bed: 650mm Maximum swing over gap: 820mm Maximum swing over carriage: 390mm Gap length: 310mm Spindle bore: 82mm Number of speeds: 18 (16-1250) Carriage width: 620mm Tailstock: Morse taper 5 Includes: - 320mm 3-jaw chuck with sets of internal, external, and soft jaws - Conventional tool post + quick-change tool post 140x140mm (2 holders) - Closed steady rest 320mm - Closed steady rest 180mm - Open follow rest - Various gears for different thread pitches Weight: 3,000kg

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine The CORMAK RGE36PWx1700 electric tapping machine is an advanced thread-cutting device designed for both large production facilities and smaller workshops. This tapping machine significantly reduces thread machining time, increasing work efficiency and improving the precision of manufactured threads. It has been developed to provide high reliability, ease of operation, and versatility across a wide range of industrial applications. Main advantages of the CORMAK RGE36PWx1700 Electric Tapping Machine High precision and fast tapping: Thanks to the powerful servo drive and tapping arm, the machine ensures accurate thread cutting in a short time, which is essential for serial production. Easy operation: The machine is equipped with a touchscreen control panel available in Polish and English, allowing simple adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth. High flexibility: The tapping arm enables thread cutting at various angles, while the rotating motor assembly allows precise positioning of the machine for different applications. Efficient cooling system: The micro-spray lubrication system cools the tools with minimal lubricant consumption, extending tool life and reducing material waste. Comprehensive equipment: The tapping machine includes a chip blow-off system, improving visibility of the workpiece and increasing overall work efficiency. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction designed for efficient and precise tapping in various industrial environments. The machine is powered by a servo drive, ensuring reliable operation and accurate control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can perform threading in a wide range of materials, including steel, stainless steel, aluminium, and non-ferrous metals. The tapping arm is equipped with a quick-change tool holder, allowing fast and convenient installation of taps. Adjustable overload clutches integrated into the tap holders provide additional tool protection during operation. This system also allows precise adjustment of torque settings, ensuring accurate and repeatable tapping results. Standard Equipment of the CORMAK RGE36PWx1700 Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE36PWx1700 Tapping Machine Parameter Value Power 2 kW Power supply 230 V Hjdpfx Asycdhpop Esfn Weight 56 kg Maximum arm reach 1700 mm Maximum spindle speed 125 rpm Included in the set: Tap holders covering the range from M5 to M36. The machine is supplied without a workbench, vice, and taps.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Hsdoza Alhopfx Ap Eefn Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Specifications: Capacity: 5,957 L Type of Stainless: 316 Stainless Steel Internal Pressure: 3 bar Internal Temperature: 37°C Jacket Pressure: 6 bar Jacket Temperature: 37°C Legs/Lugs/Mounting Ring: Lugs Dimensions: 2,150mm tan to tan x 1,600mm diameter Hfjdezim A Ispfx Ap Eon

Condition: used, maximum load weight: 31,000 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2026, Equipment: ABS, DOLL tera 2-axle low-bed semi-trailer with trailing axles New vehicle, first registration June 30, 2026 Unladen weight 13,950 kg Permissible total weight (technical) 45,000 kg Gooseneck length 3,070 mm Saddle height 1,200 to 1,280 mm Swivel radius 2,350 mm Low-bed length 6,800 mm Telescopic extension length 5,700 mm Rear axle bogie length 2,700 mm Width of excavator arm recess 700 mm Depth of excavator arm recess 550 mm Loading height of low-bed 300 mm Loading height above the chassis 955 mm Width of the semi-trailer 2,550 mm Hydraulic suspension -70 / + 530 mm Technical maximum saddle load 21,000 kg Axle load 24,000 kg Detachable gooseneck with external main frame Painting of the semi-trailer in 3 layers including hot-dip galvanizing Doll Tronic CAN-bus system Floor in the low-bed: 45 mm spruce wood planks between the flatbed frames 24-volt E-hydraulic system Control of trailer functions with DOLL keypads on the gooseneck AUXILIARY STEERING with REMOTE CONTROL EEG electronic single-lane guidance during straight-line driving LaSi in the low-bed: 7 pairs of swivelable lashing points, 13,400 daN lashing force 5 pairs of frame pockets in the outer frame 3 pairs of M36 threads externally for screwing in lashing brackets DOLL tera chassis with trailing axles and hydraulically suspended BPW axles All axles are hydraulically steered with a maximum steering angle of 60° on the last axle All lubrication points are connected to the central lubrication system WABCO trailer EBS with ABS and RSS Aluminum air tank BEKA-MAX central lubrication system on the front and rear units Overwidth package with foldable loading area extensions 2x 225 mm, extendable warning sign package up to 3,200 mm width Tires 8x 245/70 R 17.5 Hsdpfxezmqmxo Ap Esfn RENTING is the new BUYING, with us, also available in full-service rental IMMEDIATELY-----

Condition: as good as new (ex-display), Year of construction: 2024, High-quality spindle with precision tapered roller bearings Hardened and ground table guideways Turcite-B coated counter guides for high wear resistance and low friction Integrated grinding wheel removal device Machine base made of sturdy, torsion-resistant cast iron for maximum rigidity and stability Backlash-free V-flat guide in the Z-axis and flat guides in the X- and Y-axis Trapezoidal threaded spindle in the Y-axis Manual central lubrication Hfodpew Eay Isfx Ap Een All flat guides are finely scraped, guaranteeing high precision of all manual movements LED lamp Safety electrics with 24 V DC voltage Sanding accuracy: 0.005 mm Grit 46 corundum grinding wheel for all common steels included as standard Two-channel safety electrics EMC filter class Significant energy savings thanks to IE3 motor Coolant system with external coolant tank Dimensions and weights Length approx. 1970 mm Width/depth approx. 1300 mm Height approx. 1700 mm Weight approx. 850 kg Electrical data Power drive motor 1.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 200 mm Clamping surface width 500 mm Grinding wheel(s) Outer diameter 200 mm Width 20 mm Bore 31.75 mm Peripheral speed 33 m/s Spindle Speed 2850 min¯¹ Concentricity 0.005 mm X-axis Feed speed Manual

Condition: new, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 43 kg, fuel: super 95, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 700 Operating pressure (bar) 200 Hfsdpfx Aew Exv Ijp Ejn Maximum pressure (bar) 250 Water connection R 3/4″ Drive type: Gasoline Engine type: G210FA High mobility Color: Anthracite Weight with accessories (kg) 43 Dimensions (L x W x H) (mm) 878 x 538 x 702 Scope of delivery: Kärcher Classic spray gun - M22 thread High-pressure hose: 10m Kärcher Classic lance 850mm Power nozzle 25° Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient manual start. High mobility: Large inflatable wheels for comfortable operation on difficult terrain. The compact and small device is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation mode. A crankshaft pump with ceramic pistons. The compact Kärcher HD 7/20 G Classic high-pressure cleaner without water heating is the ideal choice for beginners using gasoline-powered devices. The device can be easily transported in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 200 bar and is equipped with a durable crankshaft pump and a pumping capacity of 700 liters per hour. An integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources, inflatable wheels that ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories ensure user-friendly operation. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 7/20 G Classic's sturdy steel frame also prevents external and mechanical damage. The unit does not have the ability to draw water from alternative sources.

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels Hfedpfxexarl Ne Ap Ejn - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg Hsdpfx Apjwudkis Eefn The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center height in crank: 517 mm, center width: 400 mm, turning length: 1,500 mm, feed length X-axis: 420 mm, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,240 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 2,600 kg, MTP CQ6280 Lathe 800 × 1500 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CQ6280 is a heavy-duty universal lathe designed for machining shafts, tapers, spherical surfaces and internal and external threads using turning tools, drills and threading tools. With a swing over bed of 800 mm, a turning length of 1500 mm and a Ø105 mm spindle bore, it is ideally suited for professional workshops and industrial production. TECHNICAL DATA • Maximum turning length: 1500 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm (gap length 330 mm) • Bed width: 400 mm • Z-axis travel: 230 mm • X-axis travel: 420 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm (16 speeds) • Spindle bore: 105 mm • Spindle nose: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev (25 steps) • Z-axis feed: 0.044–1.48 mm/rev (25 steps) • Tailstock quill: Ø90 mm, MT5, 235 mm travel • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm (54) • Module threads: 0.25–60 mm (46) • Whitworth threads: 7/16–80 TPI (54) Hfjdsyzzghjpfx Ap Ejn • Diametral Pitch threads: 0.88–160 DP (42) • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3240 × 1140 × 1910 mm • Weight: 2600 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard and splash guard • Coolant system • Reduction sleeves • Fixed centre • Tool set DELIVERY, WARRANTY & SERVICE Delivery can be organised to any destination in Europe. The machine is supplied with a 12-month warranty on parts, with technical service and support available throughout Europe.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, MTP CW6180X2000 – Heavy-Duty Universal Lathe 800 × 2000 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Hfedpfxjyzz Sqs Ap Een Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CW6180X2000 is a heavy-duty universal centre lathe designed for professional machining of shafts, cylindrical components, tapers, spherical surfaces and internal or external threads. With an 800 mm swing over bed, 2000 mm turning length and a large Ø105 mm spindle bore, the machine is suitable for demanding workshop and industrial applications. Its rigid 400 mm wide bed, powerful 7.5 kW main motor and extensive threading and feed ranges make it a versatile machine for repair workshops, toolrooms, maintenance departments and general production. TECHNICAL DATA • Maximum turning length: 2000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mount: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev, 25 steps • Z-axis feed: 0.044–1.48 mm/rev, 25 steps • Tailstock quill diameter: Ø90 mm • Tailstock taper: MT5 • Tailstock quill travel: 235 mm • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm, 54 ranges • Module threads: 0.25–60 mm, 46 ranges • Whitworth threads: 7/16–80 TPI, 54 ranges • Diametral Pitch threads: 0.88–160 DP, 42 ranges • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3740 × 1140 × 1910 mm • Weight: approx. 3800 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard • Splash guard • Coolant system • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for machining: • shafts and large cylindrical components, • tapers and stepped parts, • internal and external threads, • repair and maintenance components, • general industrial production work. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, tooling and machining parameters. Professional transport can be organised throughout Poland and the whole of Europe. Warranty and post-warranty service are available. Please contact us for current availability, delivery costs, additional photographs, technical information or a personalised commercial quotation.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces Hfjdpfx Asy Nd Hysp Een • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Hodpfx Apey T Hqcj Esfn Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: refurbished (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, center height: 180 mm, workpiece weight (max.): 200 kg, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 500 mm, total width: 2,600 mm, total length: 4,700 mm, total height: 2,200 mm, grinding diameter: 300 mm, workpiece weight between centers: 200,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 1,000 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 10 rpm, feed length X-axis: 320 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,500 m/min, grinding spindle speed: 1,700 rpm, overall weight: 7,500 kg, pivoting range: 30 °, warranty duration: 12 months, year of last overhaul: 2023, input frequency: 50 Hz, rapid traverse X-axis: 1,000 m/min, rapid traverse Z-axis: 1,500 m/min, input voltage: 400 V, Schaudt PF43 U1000, manufactured in 1994, retrofitted (premium refurbished) by GSN in 2023. Siemens Sinumerik 840 D SL control system. Low operating hours, approximately 3000 hours since the retrofit. MK4 workpiece spindle, MK4 tailstock. Grinding travel: 300mm Workpiece length, including clamping devices, at maximum grinding travel: 450mm Grinding wheel dimensions: 500x100mm Bore diameter: 203.2mm Controlled workpiece circumferential speed (WUG) SUG external cylindrical grinding spindle: 45m/s Freely positionable, automatic B-axis Hfedpfezcfnqjx Ap Eon Machine with new, fully enclosed splash guard GSN measuring head Diatronic 22 including C2 and W axes/turret Touch probe sensor with hydrophone (water jet) including collision monitoring Tailstock retrofitted with automatic cylinder error compensation Clamping/unclamping adjustable via hydraulic clamping device Upgrade to a 15" screen on the control panel NEW PRICE GROSS 2023: €407,432.20 plus additional tools, etc.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 Hjdsy Tmkvspfx Ap Ejfn >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: new, functionality: fully functional, operating pressure: 130 bar, empty load weight: 164 kg, input voltage: 230 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM CA 11/130 TR TECHNICAL DATA: Model: KRANZLE THERM CA 11/130 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 660 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 130 Maximum pressure (bar): 145 Connected power (kW): 3.4 / 2.3 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 11/130 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) KRANZLE spray lance (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 15m professional-grade pressure hose External water filter by KRANZLE WHY CHOOSE THE KRANZLE THERM CA 11/130 TR? The THERM CA 11/130 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. A major advantage of this model is its power supply via a single-phase 230V socket, which translates into high mobility in terms of power supply points. The THERM line emphasizes smooth operation and continuous operation, making the CA 11/130 TR a unit suitable for use in a broad range of industries. Additional handles allow for easy transport of the device with additional accessories. A brass pump head extends the life of the device. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 15m high-pressure hose, a reel, a 25° power nozzle, and an external water filter. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM CA 11/130 TR RELIABLE | DURABLE | ERGONOMIC Thanks to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Hfedpfx Ajy Shl Ssp Esn Additional handles allow for transporting the device with additional accessories. The brass pump head extends the life of the device. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling performance even with fluctuating ambient and water temperatures. Standard features include a high-pressure gun with lance, a 15m high-pressure hose reel, and a power nozzle. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded connections. Single-phase power supply (230V) Original, integrated high-pressure hose reel included! The device is brand new and factory-sealed.

Year of construction: 2000, condition: used, functionality: fully functional, Aluminum storage silo with a sturdy base ring Technical data / Dimensions Available quantity: 4 Volume: approx. 174,000 liters Container type: Silo Condition: used Food grade: no Design: vertical Internal diameter: approx. 4,200 mm External diameter: approx. 4,260 mm Cylindrical height: approx. 15,000 mm Overall height: approx. 16,250 mm Weight: approx. 3,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Notes: A new access ladder for the silo system can be offered as an option. Material / Properties Hfsdpfx Asy Ufigep Esn Material, inner shell: Aluminum Internal welds ground smooth Notes: Material AlMg3 / AlSi Equipment Base design: Foot ring / base ring Quantity: 1 Mounting: fixed Top bottom type: Conical bottom Bottom type: Cone Cone angle: 90 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eye 1 x manhole DN 500 1 x connection flange for level measurement 1 x threaded socket for max. sensor 1 x flange DN 100 (filling) 1 x vent with hood Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 (insulated) ending in a TW connection 1 x welded adapter for empty message Bottom: The silos end at the bottom in a 90° cone with a flange DN 200 and an emergency shut-off valve. Fittings: The measuring and control technology installed on the silo will be supplied free of charge. However, no guarantee can be given for its proper functioning. Documentation Drawing

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data Hfsdpfx Aszx D A Dsp Een - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: Hodpfx Aezyy Rmop Esfn * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Hjdpoz Izduefx Ap Ejfn Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: used, functionality: fully functional, thread length: 100 mm, overall weight: 4,400 kg, type of input current: AC, metric thread diameter (max.): 8 mm, Equipped with Vibratory Bowl & Helpro Process Monitor Hsdpfxjzt S Has Ap Eofn

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Variable Speed Pulley Hfjdpfjztr Nuox Ap Esn Used #10 Dies