Used End Milling for sale (32,833)

Condition: used, Year of construction: 2014, x-travel 1300 mm y-travel 500 mm z-travel 570 mm spindle taper SK40 spindle turning speed - stepless 60 - 6000 U/min rapid traverse x/y/z 7,5 m/min Number of tools 16 St. table surface area 1500 x 400 mm workpiece weight 700 kg total power requirement 12 kW weight of the machine ca. 4100 kg dimensions of the machine ca. 3800 x 3800 x 2800 mm - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device Gsdpfx Astt Tdmsg Rsbg - automatic central lubrication - Chip tray - Full enclosure - Operation manual

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply, 36 bar Additional Equipment: Drum-type tool changer with double gripper, 24 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear 4th axis preparation (rotary table) Full perimeter enclosure Gbjdpjh Ekrtsfx Ag Reg Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: good (used), Year of construction: 2016, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 593mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle, Godpfjx Dk Ahex Ag Rsbg 12 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: used, Year of construction: 2010, travel -x axis 1.000 mm travel -y axis 510 mm travel -z axis 480 mm travel of - x axis (rotary-tilting table) 420 mm travel - x axis (fixed machine table) 450 mm control HEIDENHAIN iTNC 530 turning speed range 50 - 12.000 U/min numbers of positions in the tool changer 20 tool taper SK40 table surface area 650 x 510 mm workpiece weight 300 kg Clamping surface of rotary-tilting table 420 mm workpiece weight 200 kg speeds of rotary table 30 U/min 5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit. With only 9,787 spindle hours, the unit shows low operating time. The machine is in a well-maintained condition and can be inspected at any time under power. Gbedpfxex R U Rxo Ag Rjg A machine video can be provided on request. Please refer to the offer attachment for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS505 K IC 40 | RS-505 | RS 505

Condition: good (used), Includes discharge screw for transporting the material. Two other smaller grinding mills are also available; if desired, all three can be sold as a package. Gbsdex N T Duepfx Ag Rog

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min Gedpfxsx S Rx Ij Ag Robg rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: used, Year of construction: 2002, x-travel 2600 mm y-travel 1000 mm z-travel 1000 mm table-size 3.600 x 900 mm max. workpiece weight 8.000 kg no. of flutes 6 groove width 22 mm flute distance 125 spindle taper ISO 50 DIN 69871 number of spindle speeds 4.000 (2 Steps 0 - 1.000, U/min feed speeds 10 - 5.000 mm/min rapid speed 10.000 / 10.000 / 10.000 mm/min dimensions of the machine ca. 9,82 x 5,1 x 3,16 m weight of the machine ca. 21,5 t Control Gjdpfx Aogvqqlsg Rsbg Engine: Spindle drive motor: 29 kW Feed drive motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE Control and Drives: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package: motors, measuring systems, and handwheel ICS: Internal coolant supply – 36 bar Rotary Table: 1600 x 1200 mm – dual motor drive system Gsdpsff Hz Hsfx Ag Rsbg Additional Equipment: Chain-type tool changer with double gripper, 40 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping Gbjdox R Sv Sopfx Ag Rjg -Fine adjustment via spindles and handwheels

Condition: good (used), Technical data: Travel paths: Godpfow Ebhmjx Ag Robg Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Quill travel: 127 mm Spindle mount: collet chuck Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted - Documentation Condition: good, workshop-tested

Condition: used, Year of construction: 2013, x-travel 750 mm y-travel 1.000 mm z-travel 870 mm number of spindles 2 no. of tables 2 Number of axes 5 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Gbsdpfox Ti Drsx Ag Rjg Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (min.): 3,300 rpm, spindle bore: 104 mm, travel distance X-axis: 870 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,598 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, Equipment: rotational speed infinitely variable, MAZAK CNC Turning Machine MODEL: INTEGREX e-500 HS /U1500 with Mazatrol 640M PRO Control for sale. The machine is in good condition and can be inspected under power on site. The machine maintenance can be documented. In 2025, the X and Y axes were replaced. The milling spindle and gearbox were replaced in 2024. Technical Data - Max. swing diameter: 820 mm - Max. turning diameter: 820 mm - Max. turning length: 1524 mm Main spindle: - Speed range: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Spindle bore: 104 mm - Indexing: 0.0001 Sub spindle: - Speed: 0-3300 rpm Gsdpfxjx Syldo Ag Robg - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Indexing: 0.0001 Milling spindle: - Drive power: 37 kW - Max. torque: 260 Nm - Speed range: 0-10,000 rpm - Tool holder: SK50 Tool magazine: - Number of tool pockets: 120 Travel: - X: 870 mm - Z: 1598 mm - Z2: 2458 mm - Y: 500 mm - B axis: -30 to 210°, 0.0001° Feed rate: - X/Y/Z: 40 mm/min Machine data: - Connected load: 104 kVA - Operating voltage: 400V / 50 Hz - Required footprint (L x W): 7 x 3.5 m Special accessories: - 120-position tool magazine - High-pressure coolant 70 bar - Renishaw - Laser measurement system for rotating tools - Interface set - Air/water through-spindle cooling - Overload monitoring system - Mayfran Consep 2000 chip conveyor - SMW quick-change chuck

Condition: ready for operation (used), Year of construction: 1992, feed length X-axis: 1,500 mm, feed length Y-axis: 700 mm, feed length Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, overall weight: 4,000 kg, Heidenhain visual display, 3 axes, external electrical cabinet Gedpex Sw Tlofx Ag Rsbg continuously variable feed drive table 2000x460 mm travels 1500x700x550 mm automatic lubrication max. spindle speed 2066 rpm

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 12,000 kg, table length: 4,100 mm, workpiece weight (max.): 12,000 kg, overall weight: 26,500 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems and handwheel) Godpsh Ekrzjfx Ag Rjbg ICS: Internal coolant supply, 36 bar Additional Equipment: Drum-type tool changer with double gripper, 24 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear 4th axis preparation (rotary table) Perimetric enclosure Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Year of construction: 1980, condition: good (used), Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm Gbedpfx Agjgfcm As Rjg -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY-TYPE MILLING MACHINE Control and Drives: Two HEIDENHAIN TNC 640 digital path controllers – one at the front of the machine and one at the rear in the cabin HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Chain-type tool changer with dual gripper, 60-tool capacity Dual hinged belt chip conveyors (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Gbodpfx Ajvrv Sujg Rog Only inquiries from Germany will be answered.

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts Gsdpfx Agecx Ifis Rebg -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 15 mm -Thread: right -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.8 kg

Condition: used, End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm Gbodpfx Agefvcxzs Rog -Weight: 29 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -for sawing: edges on the front and back edges of the workpiece -1x: Motor Perske -Type: KN60.09/2 -Power: 1.5 kW -Voltage: 220/380 volts -Frequency: 50 Hz -Speed: 2810 rpm -Dimensions: 900/575/H450 mm Gjdpfodnca Nox Ag Robg -Weight: 112 kg

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Gjdpjnzpx Rjfx Ag Rebg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz Gbsdpfob A Nmiox Ag Rjg -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 3.0/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1100/600/H1330 mm -Weight: 340 kg Gsdpfxsb R Ua Ej Ag Robg

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, attachment holder -Milling holder: SK40 holder 3 pieces Gbjdpswaxlfofx Ag Rog -Type: 40x22x25x40 / 40x32x25x60 -Shaft: Ø 32 / 30 / 22 mm -Price/Delivery: complete -Transport dimensions: 220/180/H60 mm -Weight: 4.6 kg/total

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for: joint milling -with: heavy dovetail guide -Milling unit: swiveling -3x: Perske Motors -Engine 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Engine 2: Type KCS 70.12-2 D Gjdpodx Aiwsfx Ag Rjbg -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other engines with different performance levels are available from us for an additional charge. -Number: 1x joining milling unit available -Price: per piece -Dimensions: 1370/1100/H1330 mm -Weight: 608 kg

Condition: good (used), Tool holder, milling tool holder -Number: 8x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools Gedob Ecdpepfx Ag Robg -only sold as a complete set -Weight: 26 kg