Used End Fitting for sale (8,458)

Condition: used, Harms Wende Welding Technology HWG2708SK-01 HW2000 Control Manufacturer: Harms Wende Product Area: Welding Technology Type Designation: HWG2708SK-01 Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! Ksdpfx Ajxl D Igekpjnc International shipping costs available upon request!

Condition: used, This listing is for a Kendall Genius 2 Checker/Calibrator Kedpfx Ajxzgvxjkpsnc The Genius™ Checker & Calibrator checks the accuracy of the Genius™ tympanic thermometer and automatically recalibrates the thermometer, if necessary. In addition, the checker & calibrator has the capability to generate a test report for each thermometer tested and save it to a USB flash drive. It works with all Genius™ thermometer software revisions. The Genius™ checker and calibrator contains two independently controlled infrared calibration targets that are similar to factory calibration targets. These “blackbody” targets are designed to have efficient radiative heat transfer and produce infrared radiation that approximates the human ear at temperatures of 32.2°C (90.0°F ) and 40.6°C (105.0°F).

Condition: used, functionality: unexamined, machine/vehicle number: LD 50, Used Pendraulik LD 50 laboratory dissolver Knedpfx Asxp Hw Eskpoc Manufacturer: Pendraulik-Ruhrwerk Model: LD-50 Max 8,400 rpm

Condition: new, pressure 20 t stroke 200 mm table-size 550 x 550 mm working speed: 10 mm/ sec. Ksdpfx Aovn U Dujkpsnc work height max. 940 mm toolpiece height max. 200 mm total power requirement 2,2 kW 200 x 10 mm weight 650 kg dimensions 1,1 x 0,6 x 1,22 mm

Condition: used, overall weight: 24,000 kg, axle configuration: > 3 axles, first registration: 12/2010, next inspection (TÜV): 11/2025, * SAF axles * Wheel recesses * 4th axle * Hydraulic loading ramps Ksdpfxjvav U Se Akpsnc * 50mm drawbar eye * Tare weight: 9,650 kg * Permissible total weight: 24,000 kg * TÜV (technical inspection): 11.2025 * SP (safety inspection): 05.2025 -----Internal vehicle number: 10093----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 46 rpm -Power: 0.12 kW -Design: Angle -Shaft diameter: Ø 16 mm -Protection rating: IP54 -Number: 1x motors available -Price: per piece -Dimensions: 250/160/H150 mm -Weight: 6.5 kg Knsdpjb Sgziefx Akpsc

Condition: new, pressure 10 t stroke 200 mm table-size 450 x 450 mm working speed: 10 mm/ sec. work height max. 940 mm toolpiece height max. 150 mm total power requirement 1,1 kW 150 x 6 mm weight 0,4 t dimensions 1,15 x 0,5 x 0,9 mm Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools Knsdpfst Eacajx Akpec

Condition: good (used), running guide (5122) shaft diameter 100 mm Kjdpfx Akjc Unyhopsnc SPH 150 mm distance between mounting holes 85 mm

Condition: good (used), Co-rotating impeller (5120) Kjdec Unylspfx Akponc Shaft diameter 120 mm Overall length 565 mm Overall height 460 mm Height from base to center of shaft 195 mm Bore spacing 500 mm

Condition: new, Year of construction: 2026, Panel Saw ALTENDORF F 35 Type 1 - 1000 Top for Solid Wood - New machine - immediately available from stock Bitburg - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large safety hood Double roller carriage, 3,200 mm Scoring unit-ready Rip fence, cutting width 1,000 mm Angle/miter fence 3,450 mm, without length compensation Table extension/widening: Powder-coated surface Saw blade tilting range: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade diameter: 450 mm Display size: 15 inch Working table height: 910 mm Extraction port diameter: 80 + 120 mm Kedpsxyl Epsfx Akpjnc Options included: M45102 Rip fence 1000 mm Digit_X Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1992, Panel saw Manufacturer: Altendorf Model: F45 Knodpfxoz I Tqaj Akpoc Year of manufacture: 1992 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: approx. 1,450 mm Power: 5.5 kW Saw blade diameter: max. 450 mm Speeds: 3000 - 4000 - 5000 rpm Scoring saw: No Motor brake: No

Condition: used, empty load weight: 6,100 kg, maximum load weight: 29,900 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 01/2025, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: white, Year of construction: 2024, operating hours: 118,727 h, mileage: 118,727 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41940 Langendorf, SKS-HS24/30 * Year of manufacture: 2024 * ABS, Anti-lock Braking System * Alloy wheels * Air suspension * Lift axle * Air connection, coupling head (red + yellow) * Connector plug, 2x7-pin * Connector plug, 15-pin * Lifting and lowering device * Steel dump body * Oscillating valve * Suspension: Air * Gross vehicle weight: 36,000 kg * Unladen weight: 6,100 kg * Payload: 29,900 kg * Permissible gross vehicle weight: 36,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 50% - 50% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 60% - 60% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 70% - 70% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Electric Cramaro cover * Alcoa Durabright rims * Wabco Smart Board * Mileage: 118,727 km Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates Kedpfx Akjz Skg Njpsnc * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * Technical inspections, registration service * Transport of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system Knedpoz D Aqzofx Akpoc electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Kjdpfx Asz A Sxljkponc Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2016, next inspection (TÜV): 08/2026, Equipment: ABS, * Electric sliding roof with remote control * 1st axle liftable * Semi-tipper body made of steel * SAF axles * Disc brakes * Wabco Trailer EBS-E ----* ?Tire dimension: 385/65R22.5 * Technical gross weight: 36,000 kg * Tare weight: * Overall length: * Next inspection due: / Kedpez S S Igefx Akpjnc ----Vehicle number: 12607----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle TÜV/inspection acceptance Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport----?YOUR VTS TEAM

Condition: used, axle configuration: 2 axles, first registration: 10/1991, Container semi-trailer Langendorf type SA, FG 18 - 28, in very good condition and very little used, Knodpfxsxpz U Es Akpjc

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm Kedpsu Id Rusfx Akpsnc longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Kjdpfx Akou Ickyepenc Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: new, loading space length: 6,500 mm, loading space width: 2,550 mm, loading space height: 850 mm, color: other, Year of construction: 2026, Parking location: Wieluń Polem. 98-300 Wieluń, ul. Felicji Rymarkiewicz 6 Wielton GmbH Kodpfxszxcpis Akponc = Further information = Number of Euro pallets: 16 Damage: none = Further information = Year of manufacture: 2026 Unladen weight: 7,380 kg Payload: 22,620 kg GVW (Gross Vehicle Weight): 30,000 kg Damage: none Please contact Olaf Schinke for further information.

Condition: new, Year of construction: 2026, pressing force: 80 t, DURENDUS 80 T Workshop Press – Single-Column Press – 900 mm clear width, 400 mm stroke The machine shown here has already been built and delivered to a customer. We can deliver this machine from stock or manufacture it new – and we will gladly take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard design – in practice, it is usually expanded with additional equipment and configured according to the project requirements. Tabletop with X-shaped T-slot 600 × 900 × 30 mm Pressure setting Lateral displacement of the press ram (600 mm) Bending tool Torque-resistant cylinder with manual stroke adjustment V-profile straightening block in combination with tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Type: Workshop press Press force: 80 t (optionally adjustable) Total weight: approx. 800 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working area Clear width: 900 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbar usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 180 mm Piston rod: Ø 100 mm Height adjustment: via chain mechanism Knjdpfx Ajy Hqlqokpec ==== Speeds No-load speed: 7.5 mm/s Return speed: 10.9 mm/s ==== Hydraulics & Drive Pump output: 11.5 l/min Motor power: 3 kW Hydraulic tank: 24 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 3.5 kW ==== Equipment Height-adjustable crossbars with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on them. Our great strength lies in special machine construction and press automation. We distribute tailor-made hydraulic presses at surprisingly affordable prices. Leading European manufacturers’ components are mainly used for the hydraulics of the presses.

Condition: new, Year of construction: 2026, pressing force: 150 t, DURENDUS 150 T Workshop Press – Single-Column Press – 1,250 mm clear width, 400 mm stroke The machine shown here has already been manufactured and delivered to a customer. We can supply this machine from stock or manufacture it new – and we will gladly take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (upon request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard design – in practice, it is usually expanded with additional equipment and configured accordingly for the specific project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure setting Lateral displacement of the press ram (900 mm) Bending tool Torsion-resistant cylinder with manual stroke adjustment V-profile straightening bolster in combination with the tabletop LED lighting Foot switch Cooling ===== Technical Data + Information: ==== General Information Type: Workshop Press Ksdpfxsy Hrkuj Akpenc Press force: 150 t (optionally adjustable) Total weight: approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working Area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Cross member usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 230 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Pump output: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connection power: approx. 6 kW ==== Equipment Height-adjustable cross members with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: new, Year of construction: 2026, pressing force: 200 t, DURENDUS 200 T Workshop Press – Single-Column Press – 1,500 mm clear width, 400 mm stroke The machine shown here has already been manufactured and delivered for a customer order. We can re-manufacture this machine for you very quickly – and we will be happy to take individual options into account. This is a hydraulic workshop press for pressing, straightening and assembly work in workshop and industrial applications. Options (on request): The options listed are based on realized customer projects and enable targeted adaptation of the machine to the specific application. The basic machine represents a functional standard design – in practice, it is usually expanded with additional equipment and configured accordingly to the project requirements. Tabletop with X-shaped T-slot 800 × 1,200 × 120 mm Pressure setting Lateral displacement of the press ram (1,000 mm) Bending tool Torque-resistant cylinder with manual stroke adjustment V-profile straightening support in combination with tabletop LED lighting Foot switch Cooling ===== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 200 t (optionally adjustable) Ksdpjy H Ddmjfx Akpsnc Total weight: approx. 2,100 kg Overall dimensions (W × D × H): 2,000 × 900 × 2,750 mm ==== Working Area Clear width: 1,500 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,500 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 280 mm Piston rod: Ø 165 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.4 mm/s Return speed: 11.4 mm/s ==== Hydraulics & Drive Pump capacity: 24.5 l/min Motor power: 7.5 kW Hydraulic tank: 54 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 8 kW ==== Equipment Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-layer coating according to RAL ===== Pressing, ejecting, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they meet all points of the national Brazilian safety directive NR 12, which is based on these. Our great strength is in the design and manufacture of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Workshop Press – Single-Column Press – 700 mm clear width, 400 mm stroke The machine shown here has already been built and delivered according to a customer’s specifications. We can supply you with this machine from our stock or manufacture a new one – and we will gladly take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial applications. Options (on request): The options listed are based on realized customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional standard design – in practice, it is usually expanded with additional equipment and configured accordingly to the project requirements. Tabletop with X-shaped T-slot (from 60 t) Pressure setting Lateral displacement of the press ram (from 60 t) Bending tool (from 60 t) Torsion-resistant cylinder with manual stroke adjustment V-profile straightening bolster in combination with the tabletop LED lighting Foot switch Cooling ===== Technical Data + Information: ==== General Information Design: Workshop press Press force: 30 t (optionally adjustable) Total weight: approx. 500 kg Overall dimensions (W × D × H): 1,150 × 700 × 2,350 mm ==== Working Area Clear width: 700 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Cross member usable width: 700 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 115 mm Piston rod: Ø 65 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 10.4 mm/s Return speed: 15.3 mm/s ==== Hydraulics & Drive Pump output: 6.5 l/min Motor power: 1.5 kW Hydraulic tank: 14 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Ksdpfey Hixcex Akpjnc Connection: 400 V / 50 Hz Total connected load: approx. 2 kW ==== Equipment Height-adjustable cross members with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, ejecting, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the construction of special machines and the automation of presses. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: good (used), operating hours: 8,053 h, lifting height: 7,850 mm, free lift: 1,920 mm, fuel type: electric, fork length: 990 mm, front tire size: 13/7-8-286, total height: 2,740 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Year of manufacture: 2018 Year of construction: 2018 Front tyre size: 13/7-8-286 Lifting capacity: 2.000 kg CE mark: yes Technical condition: good Visual appearance: good = Additional options and accessories = - Sideshift = Remarks = Flexi Bendi AC1200 – Year of construction 2018 – 8053 hours 7.85 meter lifting height – Electric narrow aisle truck with side shift Are you looking for a compact and versatile narrow aisle truck for efficient warehouse use? This Flexi Bendi AC1200 from 2018 with 8053 hours is electrically powered and equipped with a powerful 48V / 775 Ah battery. Thanks to the Quattro mast, sideshift and small turning circle, this truck is ideal for narrow aisles. With a lifting height of 7.85 meters and a lifting capacity of 2000 kg, this truck is suitable for various warehouse applications. The machine is in good condition, is CE-certified and is delivered without a battery charger. Specifications: Year of construction: 2018 Hours: 8053 hours Knjdpfx Ajydprcjkpjc Battery: 48V / 775 Ah Lifting height: 7.85 meters Clearance height: 2.74 meters Mast: Quattro Lifting capacity: 2000 kg Drive: 2x4 Attachments: Sideshift Weight: 5,645 kg CE certified Price excluding VAT For more pictures and videos please visit our website. Contact us for availability or a viewing.

Condition: new, loading space length: 7,500 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, color: other, New vehicle – price upon request! Available in the short term. Please contact Mr. Schinke. We expressly reserve the right to sell the item in the meantime, as we also offer it on other platforms. The information regarding accessories is without guarantee; subject to changes, prior sale, and errors. We strongly recommend and offer the possibility of an inspection and test so that no false impressions arise regarding the condition and suitability for the buyer. Inspections and tests are possible at any time by prior appointment and are expressly desired. We will handle all formalities and hand over the vehicle with the desired transport license plates for an additional fee. The images have been partially edited and are only for initial viewing. If you are interested, please contact us and request current images. Kedpfx Ae Aa I Ecjkponc 45731 Im Wirrigen 38 Langendorf Trading GmbH = Further information = Damage: none Weight: 5200 kg = Further information = Unladen weight: 5,200 kg Payload: 33,800 kg GVW: 39,000 kg Damage: none VAT/Differential taxation: VAT not deductible (margin scheme)