Used Fit Centre for sale (5,685)

Condition: new, Ruchsr Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Codpfx Aed Ih Husqgorf Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155...

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table ----- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic switch-off of the filling container manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail manually adjustable in depth against left and right one 4-fold turret stop each. PSF - Pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips should be used as a support. Item 1.1 Article 6315 RU-BM-... adjusted to customer's fitting specification Item 1.2 Article 0500000 Holder adjusted to customer punching press/ shear For mounting a customer-supplied punching press or shear (other manufacturer) on the sash assembly table. Please specify make when ordering !!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Fitting bearing options for RU-BM-3000: ----- Version with fixed fitting bearing: Price EUR 5.468,00 Article 0630000 RU-BL-30/30 Fixed fitting storage unit Mounted above the leaf assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, divided by partitions. Freestanding version: Price EUR 6.017,00 Item 0710000 RU-SBL3000/30 Freestanding storage unit, Length 3100 mm, depth 1250 mm, height 2050 mm, upright frame on the front without supports, 30 compartments, 10 in a row, each divided by partitions and a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm 4 pcs. Angle supports for corner deflections: Price 609,00 EUR Crsdpjt Tq Aasfx Aqgef Side length 120x120mm; inclination approx. 3° The front edge of the angles is bent up 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the fitting. ----- Surcharge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, inclination of working platform manually ble width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: EUR 2,811.00 Fitting bearing for RU-BM-3500 (only free-standing possible): Price EUR 6,665.00 Item 0710007 RU-SBL3800/36, free-standing fitting storage Length 3800 mm, depth 1280 mm, height 2060 mm...

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Table height and working angle mechanically adjustable Crsdpfx Aqexmamusgof with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Codpfx Aqjzr Nf Dsgjrf Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Enclosed Guarding

Year of construction: 2016, condition: used, Schuco AF300 CNC Profile Machining Centre, 3 Sided Machining of Aluminium & Steel Profiles, 4000mm Bed Length, 18,000 Spindle Speeds, 8 Position ATC, BT30 Spindle Taper, 5 Separately Driven Clamping Blocks, Digital Tool Height Pre Setter, BT30 Tool Rack and Collets. S/No. 9912917 (2016). Country of Origin: Italy Csdpezqdrijfx Aqgsrf Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Crjdpfxozr H Tls Aqgof Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping 5 off BT40 toolholders Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Credpfx Aqstwgirsgsf Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Codpfokw H Ekex Aqgerf Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: new, • Working capacity 3300mm X, 200mmY, 180mm Z Crjdpfsn Nv S Tjx Aqgsf • 1 x vertical electro-spindle 7kw with saw • 1 x vertical electro- spindle 7kw 12 – 18000 rpm • 1 x electro-spindle kw1.7 with point to point vertical / horizontal drilling group • 1 x horizontal electro-spindle 5.6kw 12-18000 rpm • 4+4 work piece holding benches moveable on the X axis/ Each fitted with adjustable pneumatic workpiece clamps • L/H and R/H retractable work piece reference stops • Stand alone electrical control cabinet with hand held remote control for machine set up • Simple parametric programming with 3D working models • Perimeter safety cabin with front doors, vertical operation, synchronised with machine cycle

Condition: good (used), Year of construction: 2019, CNC machine with fixed table and dual drive gantry, five axis interpolating electrospindle. Particularly suitable for SIPS panels, woodworking, plywood, MDF, plastics and thermo formed prodcuts. Crodpfxovpv Nbj Aqgef 6120mm x 1605mm Working field in X / Y axis 6850mm X axis stroke 1970mm Y axis stroke 1080mm Z axis stroke Max height / panel passge 700mm C axis rotation + / - 360 degrees 12kw electrospindle with programmable speeds from 500 - 22,000 rpm 12 Position automatic toolchanger Auxiliary 2 position toolchanger 250m3/hr vacuum pump 2 Field phenolic working table suitable for vacuum cups Hoist points to fix jigs [ series of threaded holes on table for mechanical fixing ] Set of 3 disappearing stops OSAI Series 10 CNC control including [ for example ] PC with Windows XP [ or higher ] Interactive programming Paramteric programming 3D interplolation Cutter radius compensation Extraction requirements 2200m3/hr Weight 5235kg Year - 2019 CE FULL ORIGINAL SPECIFICATION SHOWN IN IMAGES

Condition: used, machine/vehicle number: 008697, X axis working area: 3200 mm Y axis working area: 1250 mm Main Electrospindle power: 6.5 KW Number of controlled axes: 4 axes Crjdpfozruzqox Aqgef Total number of drilling spindles: 43 Total number of tool changer positions: 8

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Crjdpfx Aezqt Umsqgof Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, 3,257m Bondstrand GRE 8"-32"Pipes, Fittings and PE Transition Spools (Unused) Including KLF x KLM socket/spigot pipes, elbows, and PE transition spools with puddle flanges, in diameters ranging from 8" to 32". Includes approximately 3,257.81 metres of GRE standard-length pipe (11.89 m nominal lengths) Consisting of: 7x 32" pipes (83.23 m) 10x 24" pipes (118.90 m) 62x 20"pipes (737.18 m) 52x 16" pipes (618.28 m) 95x 12" pipes (1,129.55 m) 48x 8" pipes (570.72 m) Also includes: 26x 45 elbows (20", 16", 12", and 8") 3x 32", 8x 24", 46x 20", 14x 16", 50x 12", 45x 8" KLM x PE spools including puddle flanges 3x 32", 8x 24", 46x 20", 14x 16", 50x12", 45x 8" KLF x PE spools including puddle flanges All materials are supplied as one complete lot and should be considered in accordance with the quantities and sizes listed in the accompanying schedule. Photos may feature items not included and should not be relied on. The description table and text describe the item(s) for sale in this lot. Csdpfozn Rb Sox Aqgsrf

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 5V0168, MACHINE SPECIFICATION Height of centres 280mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm Width in front of faceplate 216mm Bed length between centres 2000mm Spindle speeds: number 3 Spindle speeds: ranges 18-200,55-605, 160-1800rpm Spindle nose mounting Camlock D1-11 Spindle bore 104mm Taper in nose bush No. 5MT Width over bedways 400mm Travel of cross slide 300mm Travel of top slide 175mm Travel of tailstock barrel 178mm Tailstock in tailstock barrel No. 6MT Approx. Weight 3650Kg Machine in Metric execution Credpfxjzna Two Aqgjf MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 4-off toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro Crsdpfszpwwpsx Aqgef 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, turning diameter over cross slide: 660 mm, turning length: 3,000 mm, spindle bore: 82 mm, spindle speed (max.): 1,500 rpm, spindle motor power: 11,000 W, total height: 1,500 mm, total length: 4,700 mm, total width: 625 mm, Centre lathe CONTUR SAEILO - SJ-600L MACH-ID 9759 Make: CONTUR SAEILO Type: SJ-600L Year: 2015 3 chuck schunk 315 mm 4 chuck schunk 400 mm Multi fix tool system with inserts Digital reafdout system Steady rest  DBC Turning Length: 3000mm Swing over bed Ø: 660mm Swing over cross slide Ø:438mm Spindle bore: 82mm Spindle power: 11kW Bed width: 400mm Tailstock spindle Ø: 85Ø Stroke pinole: 165mm Spindle taper: 5Mk Speeds / ranges: 1500Rpm Length: 4700mm Width: 625mm Height: 1500mm Weight: 3000kg Crodpfx Aqjzpwpljgof Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Crsdpfjzhx D Usx Aqgsf Clamping device: yes / pneumatic Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2008, 3650 x 1560mm Matrix Table 4455mm x axis stroke [for routing] 1930mm y axis stroke [for routing] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis speed 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length 3 x Additional rear stops Automatic centralised lubrication "PC Office" Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Codpfx Aezd Utwsqgerf Keyboard CD Rom drive 40 Gbyte hard disk 128MB Ram Serial nr - AA2 / 000268? Year - 2008 CE Compliant Condition - Good

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017 Csdpfx Aqotqfv Ijgerf

Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Spindle rpm 4,500 RPM Codpfxsu A Ut Ns Aqgjrf Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally Csdpfx Aqjzdk Hyogsrf required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set for fix...

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) Crjdpfey T R Tujx Aqgjf - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: used, Portas BEV electro-pneumatic pot-and-tongue drilling machine for drilling pot-and-tongue joints or fittings Crsdozrytrjpfx Aqgsf Technical data: - Table top: approx. 300 x 37 cm - Weight: 180 kg

Condition: used, machine/vehicle number: 008696, X axis working area: 7400 mm Y axis working area: 2250 mm Working Table: Flat table Crodpfjzrux Nsx Aqgef Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of tool changer positions: 30

Condition: used, SCM Routech R 3000 CNC machining centre for machining sheet material, with automatic loading (vacuum destacker) and unloading. Technical data: Codezryylspfx Aqgorf - Working area: 2,600 x 1,250 mm - X-axis: 2,700 mm - Y-axis: 1,600 mm - Z-axis: 250 mm - Spindle motor: 7.5 kW - Feed rate: Max. 38 m/min - Video: On request