CNC Vertical Machining Center

Emag VSC 200

Condition: used, Year of construction: 1994, weight je 6 t 2 ja ja Itjdpfxou T Sfho Aa Ejr control Siemens

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Itjdpfjxcgtgex Aa Esr Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 200 mm, spindle speed (min.): 6,000 rpm, overall weight: 6,500 kg, power: 40 kW (54.38 HP), year of last overhaul: 2023, Equipment: documentation/manual, Both machines form a single unit. Year of manufacture: 2003, fully functional and still in operation. See photos. The machines are equipped with a chip conveyor serving both machines. A coolant tank was subsequently installed. Itjdexq Aruspfx Aa Ejr Accessories include various holders, jaws, and one new AGW. The machine can still be inspected under power and in operation.

Year of construction: 1999, condition: ready for operation (used), There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. Itjdpom H Urhjfx Aa Eor

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 67027, Hersteller: ZAYER, Typ: GMCU 6000-AR, Baujahr: 2014, Serien-Nr.: 67027, Iodjw Iy Hlepfx Aa Estr 6-Achs, Tischoberflaeche: 7000*2500*300mm Breite zwischen den Standern: 3800mm Verfahrwege (X/Y/Z): ca. 6000/4500/1250 mm, Werkzeugaufnahme SK50, 60-fach Werkzeugwechsler, Steuerpult HEIDENHAIN iTNC 530, Späneförderer TECNIMETAL, Kühlmittelanlage, Sicherheitsabsperrung mit Lichtschranken LENZE

Condition: good (used), Year of construction: 1998, Emag VSC 200 with workpiece conveyor and chip conveyor. Itjdpfxstq Ifns Aa Ejr The main spindle bearings were replaced in 2005. Control: Siemens 840D Turning diameter: Ø 260 mm. Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, width: 1,800 mm, height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only used in 1-2 shift operation.

Year of construction: 2021, condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA Itedpeg E S Inefx Aa Eer PLC: Siemens S7

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Iodpfx Aajv N Hc Se Ejtr

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Itodpovun Tpsfx Aa Ejr Vertical measuring range Z = 50mm Column travel range Z2 = 350mm Inclination +/- 45° Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003

Condition: excellent (used), Desktop Metal 3D Printer Complete System Itedok Hz Nqopfx Aa Esr Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.