Used Ingersoll for sale (60)

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. good working condition Ljdpfxenp Iyws Apmjhi

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Ljdpfx Aewric Ejpmehi

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Lodpeu Ic Ryjfx Apmjhi 225 Kw Year 2012

Condition: good (used), Year of construction: 2008, Ingersoll Rand screw compressor 110 Kw Year 2008 Ledpfxju Idnae Apmehi

Condition: used, Year of construction: 1999, Diesinking / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 300 mm table size X: 550 mm table size Y: 470 mm max. workpiece size X: 700 mm max. workpiece size Y: 500 mm max. workpiece size Z: 250 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 20 - time Ljdpfjzguidox Apmjhi generator: 50 Ampere drop tank Control CNC control: Mitsubishi 32-bit EDM control

Condition: used, Year of construction: 2007, operating hours: 5,950 h, MAKE: INGERSOLL RAND TYPE: 12/235 YEAR: 2007 CE MARKED: YES OPERATING HOURS: 5950 HOURS TIRES/UNDERCARRRIAGE: 80% POWER: 225KW ENGINE: YANMAR 6IRQ9A WEIGHT: 5125 KG OPTIONS: NEW COMPLETE FILTER SET: €2500 Lhedpjzlv Niefx Apmsi 12 BAR WORKING PRESSURE 23 M3/MIN 13 BAR MAXIMUM PRESSURE GOOD CONDITION, READY FOR IMMEDIATE USE KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low operating hours (1540 hours of erosion time) Lsdozkftbepfx Apmohi EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system Cooling unit

Condition: excellent (used), Year of construction: 2020, Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph Lhjderk Rp Ejpfx Apmoi

Condition: good (used), Year of construction: 2011, Ingersoll Rand D480IN-A Refrigerated air dryer Lsdpfx Aork Rqbjpmshi 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Completely overhauled OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – mechanically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent condition both technically and visually. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as necessary, including but not limited to ball rollers and drive spindles. A comprehensive geometric measurement, alignment, and additional verification using a laser measurement system were carried out afterwards. The machine bed as well as the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, have been completely renewed. Additionally, the machine has been completely repainted and is also visually in an extremely well-maintained condition. The generator and control system have been cleaned and technically checked. The generator’s climate control unit has also been cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing in accordance with OPS Ingersoll’s quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Manufacturer: Ingersoll (OPS Ingersoll) - Type: Die-sinking EDM machine - Model: OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn fast programming - Powertec Handheld – multifunctional manual control unit - Manual eroding with Powertec Handheld Ljdpfx Ajziz Sqepmshi - High Speed Jump max. 18 m/min - Generator output: 60 Amperes, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up carousel changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special features: - Linear measuring system on all axes (Z-axis standard on series model)

Year of construction: 2000, condition: used, Second-hand compressor Year of manufacture: 2000 Technical specifications to follow Lodpjzk N Rwjfx Apmohi Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Year of construction: 2011, operating hours: 1,703 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, tank capacity: 800 l, OPS INGERSOLL Gantry Eagle 800 year of manufacture: 2011 travel: x, y, z 550 x 850 x 450 mm control: Eagle Power Tec electrode changer: 20 pieces 3D probe 3D probe on the table magnet: 400 x 200 mm C-axis EROWA clamping system fire extinguishing system remote control chiller includes approximately 600/700 liters of dielectric fluid includes drawer cabinet with contents Lhedpfx Apszgt Rmsmei documentation machine is powered on for inspection

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: Ingersoll OPS 550 Control: Andronic 2060 Year: 2008 SPECIFICATIONS Travel X-Axis: 550 mm Y-Axis: 400 mm Z-Axis: 400 mm Rapid motion: (X/Y/Z): 60 m/min. Panning head Max. revolution: 0 - 42.000 rpm Spindle power: 15 / 17 kW Tool: HSK 40 E Ljdeziy Dxjpfx Apmohi Tool capacity: 32 Table size: 650 x 500 mm Max. Table Load: 500 kg Req. space (LxBxH): 2,58 x 1,9 x 2,26 m Machine weight: 7.200 kg Equipment Caliper Electronical handwheel Erowa Nullpunktspannsystem

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up disc changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the machine mentioned above: Replacement of the ball screw drive and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screw drives of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and the control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. Lhodozgckvjpfx Apmoi The machine is immediately ready for use and is ideally suited for reliable production operation.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, resulting in very few spindle operating hours! - Pallet dimensions: approximately 320 x 320 mm - The pallets are clamped onto the rotary table - Tool holder: HSK-E 40 - For further technical data, see the images Lhodpfx Apsy Tvcujmei - With technical documentation - With HSK-E 40 tool holders and three pallets Attention: The item must be picked up between July 21st and July 23rd, 2026, on a date to be confirmed. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 - T-slot dimensions: 18H12 - Distance HSK tool holder - table: 550 mm - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm - For further technical data, see the photographed data sheet Ledpey Tu Ddsfx Apmjhi - Including technical documentation - Including workbench and accessories such as HSK-E 40 tool holders, equipped with tools - Workbench dimensions: approx. 1500 x 900 x 1100 mm Attention: The item must be collected between July 21 and July 23, 2026, on a date to be determined. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 38 kVA, total height: 2,300 mm, total length: 3,300 mm, total width: 2,200 mm, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, input voltage: 400 V, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 550 CNC machining center (5-axis) - Distance between HSK-E tool holder and table: 450 mm - Swivel angle of A-axis: -120°/+60° Lodpoy Tutlsfx Apmehi - Swivel angle of C-axis: n x 360° - Tool holder: HSK-E 40 - Clamping surface with 4th and 5th axes: Pallet dimensions: approx. 300 x 300 mm - Maximum travel speed: 30 m/min - Repeatability: 0.002 mm - Digital display: 0.001 or 0.0001 mm (selectable) - For further technical data, see the attached images - Includes technical documentation - Includes three spare pallets - Note: specific fixtures have been attached to the pallets - Includes HSK-E 40 tool holders Attention: The item must be picked up between July 21st and July 23rd, 2026, on a date to be confirmed. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Year of construction: 2003, condition: good (used), EDM machine Machine type: OPS Ingersoll Gantry 5000 Year: 2003 Ljdpozi Sfuofx Apmohi SPECIFICATIONS Travel

Year of construction: 2009, condition: used, Ingersoll Rand TS1100W Air Dryer Manufacturer Ingersoll Rand (manufactured by Parker Hiross S.p.A, Italy) Type Refrigeration air dryer – industrial version Industrial applications • Air treatment for compressed air in pneumatic systems • Industrial applications requiring dry air: machining, painting, automation, etc. • Protection of equipment sensitive to humidity Main technical specifications: • Model: TS1100W • Serial number: 3733790002 • Cooling: water-cooled • Refrigerant: R407C • Maximum low-side pressure: 1.9 MPa (275 psi) • Maximum high-side pressure: 2.8 MPa (406 psi) • Circuit pressure: 2.6 MPa (378 psi) • Minimum/maximum air pressure: 4 bar / 14.5 bar • Maximum air temperature: 60°C • Ambient temperature: 5°C to 50°C • Power supply: 400 V – 3 Ph – 50 Hz • Power consumption: 15.6 kW / 27.8 A • Protection level: IP44 • Oil carryover: ≤ 0.01 mg/m³ (with suitable pre-filtration) • Approximate dimensions: 1,450 mm width Ljdexggmnepfx Apmehi • Approximate weight: ca. 650 kg • Year of manufacture: February 2009 🧩 Machine usage The Ingersoll Rand TS1100W industrial air dryer is designed to remove moisture from compressed air in production facilities. It protects pneumatic lines, automated equipment, and processes sensitive to humidity, ensuring the reliability and longevity of machinery. ⚙️ Features / Distinctions The TS1100W is distinguished by its water cooling, ideal for industrial environments with high thermal loads. It supports high operating pressures (up to 14.5 bar), and its R407C refrigerant meets modern environmental standards. The robust design allows for heavy-duty, continuous operation.

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Ledpfx Apjzfx S Hemehi Travel paths X/Y/Z: 1000/1510/700 mm C-axis 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Lodpjx Htfysfx Apmehi Year of manufacture: 2017. Inspection under power possible.

Year of construction: 2008, condition: ready for operation (used), A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible. Lhsdpfxszh Nhwj Apmsi

Condition: good (used), Year of construction: 1998, CNC die sinking machine INGERSOLL HANSEN Type: GRANTRY 1000 Year 1998 Control MITSIBISHI 64 Bit CNC multipuse Generator 70 Amp Travels : X 700 mm Y1350 mm Z500 mm work bowl : 1000 mm X1600 mm X 550 mm Lodpfx Aot Dbakopmshi Table load max : 3000 Kg Cooling system , Documentation available Data backup available Accessories Tool holder Hirschmann .

Condition: used, Year of construction: 2008, functionality: fully functional, 1. Wire EDM machine, OPS INGERSOLL Gantry Eagle 800, Lhsdpey Ifu Nofx Apmsi with IMC5 handling system, year of manufacture 2008. In very good condition and in operation until December 2025. Now dismantled. Includes 1 cooling unit, M.T.A TAE EVO M10 (year of manufacture 2012). 1 fire extinguishing system, Kraft & Bauer FB703. Weight approx. 6,700 kg. Available for sale at a favorable price. Price significantly reduced!

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 1,100 mm Travel Z-axis: 500 mm C-axis rotation: 360° MACHINE DETAILS Lhodpsy Rxrysfx Apmji Control: CNC Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Net weight: 13,000 kg EQUIPMENT Chip conveyor Tool magazine Probe