Used Eisen Und Hammerwerk Gmbh for sale (69,836)

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Djdpfjya H Uyjx Acyowd

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Dwedpfez Ikzpsx Acyjd Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: used, functionality: fully functional, The separation is achieved through repeated fractionation on up to 5 longitudinally arranged, superimposed sieve decks, the inclination of which increases downwards. The sieve frame is driven by unbalanced motors. The installed sieve decks have the following sizes: 15-10-5-3-1 mm. Dodpfx Ajzl Sv Secyswd The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump Dwodpfxox S Etmj Acysd > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 Djdoyxgxwepfx Acyowd serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm

Condition: new, functionality: fully functional, Year of construction: 2024, screw conveyor diameter: 20 mm, screw conveyor length: 25 mm, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Djdpfxshx Elfo Acyjwd Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 2021, condition: new, Automatic Screw Unit SE1 SA With automatic screw feeding Dedpfx Acjuxyuoyjwd Head only bench mount,...

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Double scissors lifting table type TMH 6000 *Special double horizontal - load: 5000kg - lifting height: 1100 mm - min. height: 240 mm - max. height: 1340 mm - length: 10.000 mm - width: 1200 mm - lifting time: appr. 28mm/sec. - motor power: 2,2 kW - power supply: 3 x 400 V/50 Hz + earth - power unit: integrated Dedpfx Acsy E Sdeyswd - controlling voltage for operating function is 24 Volt DC - Sealing in gereral: IP 54 - solenoid valve and push-button-box: IP 65 Technical description: - all surfaces of the metal parts are cleaned, primed with rust-preventing paint and coated with 2-component polyurethane lacquer - base frame and platform are painted in blue RAL 5015, all scissors in orange RAL 2003 - our quotation includes an aluminium safety trip bar and service maintenance bars to lock the table during service and repair.

Condition: new, Year of construction: 2026, functionality: fully functional, This UV printer, a digital flatbed printer, replaces conventional laser printers and enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: UV4060 Print head: Epson TX800 2690 dpi max. Includes software for the printer and image editing. Dimensions: 800*858*566mm Weight: 70kg 360-degree application possible upon request: for bottles and round objects. Dsdpod Ewziofx Acyewd A3 size (31x55cm) and a print height of 23cm are possible. 5 x 500ml of ink can be supplied (additional cost). Software setup and printer instructions can be provided upon request, throughout Germany and Europe (additional cost). Print videos, etc. can be sent via email/WhatsApp.

Condition: new, Year of construction: 2026, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: Freecolor PS10157V C M Y K LC LM + White Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Djdpfxod Hydco Acyjwd Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing capability: bottles/round objects (additional cost) A1+ size 100x150 cm and a printing height of 70 mm are possible. 8 x 500 ml of ink can be supplied (additional cost). + Varnish function included. Software settings and printer explanation can be provided on request, throughout Germany/Europe (additional cost). Printing videos, etc., can be sent by email/WhatsApp.

Condition: good (used), Year of construction: 2013, operating hours: 300 h, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% Dodpfx Asq Ruw Njcyjwd - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Dwsdpfx Acjfdzupeysd Weight: approx. 40 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a "quick test" even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option of control and evaluation with the basic software. This enables you to generate different test sequences and create a test report. Furthermore, you have the option of further processing the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: new, Year of construction: 2026, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS6090 Max Pro The speed champion! Printing area: 70x100 cm Printing height: 150 mm Vacuum air table Water circulation system Print head: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV - 18 channels) 720x1080 / 720x1440 / 720x2160 dpi Includes software for printer control and image editing Dimensions: 1900x1600x1220 mm Weight: 400 kg Dodjfvyagepfx Acyjwd

Condition: like new (used), Year of construction: 2021, We are offering this like-new Beckhoff Automation GmbH & Co. KG C6525-1018-0050 controller, manufactured in 2021. Manufacturer: Beckhoff Automation GmbH & Co. KG Model: C6525-1018-0050 Year of manufacture: 2021 Condition: like new Category ID: 102 Type ID: 994 Type: Controller Dwsdpsz Dg Drofx Acyed If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2007, machine/vehicle number: CCS 904-7096, total length: 4,900 mm, total width: 2,000 mm, total height: 2,300 mm, overall weight: 3,650 kg, input voltage: 400 V, track width: 470 mm, construction width: 2,000 mm, input frequency: 50 Hz, Complete Slicing Line The individual modules form an automated slicing and portioning line, from product infeed to transfer to downstream equipment. The exact configuration of this system is documented by the matching serial numbers CCS/CCW/CCR/CCA 904-7096. Weber CCS 904 Slicer No. CCS 904-7096 Year of manufacture: 07/2007 Plastic infeed belt, 3 x 70 mm belt width Dwsdpfezwk Evox Acyjd Outfeed/string belt, 470 mm wide Approx. 4,900 x 2,000 x 2,300 mm Weber CCW Checkweigher No. CCW 904-7096 Year of manufacture: 07/2007 CCW belt width 470 mm Dimensions approx. 600 x 900 x 1,400 mm Weber CCR Line/Diverter Unit No. CCR 904-7096 Year of manufacture: 07/2007 Belt width 470 mm Approx. 500 x 900 x 1,400 mm Weber CCA Depositor No. CCA 904-7096 Year of manufacture: 07/2007 Belt width 590 mm Dimensions approx. 8,600 x 1,450 x 1,700 mm Additionally, a pallet with spare parts is included. Inspection is possible at any time after prior arrangement.

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V Dwjdpjzwmr Eefx Acysd -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: used, Year of construction: 2017, operating hours: 20 h, functionality: unexamined, machine/vehicle number: 10660, filling weight (min.): 20,000 g, filling weight (max.): 1,100,000 g, Second-hand Feige ATEX pallet filling machine for sale. Djdpfx Aezxhtajcyswd type 16.1-B-00x Ex II 2G c IIB T3 The machine comes with a new Stainless steel filling valve and a new filling lance, and is equipped with Feige FST-10E weighing electronics (latest weighing electronics). Easy adjustable for different packages and easy to operate. Proven technology, Feige has sold over 5.000 filling machines. Suitable for filling weights. from 20 kg to 1,100 kg. Suitable for canisters, drums on a pallet and IBC's . Optional installation by our own local service engineers (Benelux).

Condition: excellent (used), functionality: fully functional, Limas AB: Complete Vegetable Processing Line (peeling, cutting, sorting, and washing) Manufacturers: Limas AB / Quiel GmbH / VEB / Rewa Model / Type: Complete vegetable processing line Key components and specifications: - Peelers and cascade systems: Three-stage brush/cascade peeler Limas AB (serial number: L-1244, manufactured in 2021): roller width 2470 mm, dimensions: 3100 x 2550 x 3052 mm. Dwjdjz Suxbopfx Acyod 2x Stainless steel peelers (including a model from 2007): feed 500 x 500 mm, diameter 950 mm, outlet 630 x 520 mm. 16 peeling shafts with a length of 1500 mm. Elevators and screw/belt conveyors: 4 stainless steel screw elevators with different lifting heights (including 3640 mm, 2350 mm, 2300 mm, 2250 mm). Quiel GmbH screw elevator (Type SFRV5, power 1.5 kW, lifting height 3180 mm). 4 Quiel GmbH hoppers (type SFV 4, power 25 kW) with screw elevators. Belt and inclined conveyors with scrapers (belt width 350–400 mm). Slides / stainless steel chutes (210 x 2000 mm) and vibrating chute (1600 x 800 x 820 mm). - Washing, sorting, and cutting: VEB stainless steel hopper (Type 8260, manufactured in 1974, roller width 620 mm). VEB drum washer (drum width 470 mm, perforation 10 mm). Limas AB sorting system with a sorting drum (ø 450 mm, length 3000 mm, perforations: 23, 38, 50, 65 mm). Select slicer, type Agroselector with V-shaped belt and ø 500 mm blade, and compact slicer (inlet ø 150 mm). Roller inspection table (roller width 500 mm, dimensions 2900 x 1060 x 2120 mm). - Packaging and control: Batch weigher and Rewa weighing/counting machine (Type 83Z, range 0.04–60 kg). Control cabinets and operator platform (platform 3250 x 2250 x 2800 mm). 3 pallets and stainless steel frame with various spare parts.

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. Dwodpfenq A U Asx Acyed An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. Dwodpfjwzv Hisx Acyjd An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 60 mm, total height: 1,660 mm, total length: 80 mm, overall weight: 80 kg, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) Dsdeunh Hrepfx Acyewd - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. Dsdeun R N Aepfx Acyewd 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: new, Year of construction: 2025, pressure: 12 bar, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup but also protects the operator and those around them from the harmful effects of airborne particles. With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ PR 50 Dust-free Sandblaster With its versatile application capabilities, the PR 50 can handle a wide variety of surfaces, from hard metal to delicate glass. Dwedpfx Acoupzn Esysd Our PR 50 is an excellent choice for those working in the automotive, construction, or cleaning industries, to name a few. Its compact size and handy design make it easy to operate and transport, even for those new to sandblasting.

Condition: new, Year of construction: 2025, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup work, but also protects the operator and those around them from the harmful effects of airborne particles. Djdpfx Acowc Rg Hoyswd With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. Thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ DINO II & DINO MASTER Available in 60 and 100 liter versions The SAPI pressure-return sandblaster "DINO" is a compact and universally applicable device. It is characterized by its robust construction and mobility. The blasting performance depends on various factors such as surface condition, compressor capacity, type of blasting media, etc. The cleaning performance is 3 - 10 m² / hour. Overall, this device provides the worker with a clean working environment, low abrasive consumption (thanks to the suction unit), and lower waste disposal costs. The device is used in the steel, shipbuilding, and petroleum industries, as well as for maintenance work in the construction sector, by stonemasons, and others.

Year of construction: 2020, condition: new, Title: Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year of Manufacture 2020 – NEW / unused Brief Description: For sale are unused, original-packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in new condition, have never been put into operation, and are originally packaged by the manufacturer. Manufacturer: Strassburger Filter GmbH + Co. KG (Germany) Model / Type: SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture: 2020 Serial Number: e.g. 032003303920 (other serial numbers available) CE Marking: Yes Condition: New / unused Original packaging Never installed, never used in production Stock item Quantity available: 3 identical machines available New Price: New price €94,000 per unit Design / Material: Completely stainless steel Plate and frame filter press Gasketed plates Pharmaceutical / Biotech design Hydraulic closure including hydraulic unit CE-compliant Technical Data: Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight: Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight of filter frame: approx. 480 kg Weight of plate pack: approx. 120 kg Plate Pack: 14 filter plates 13 filter frames 1 end frame 1 baffle plate 28 filter layers per configuration Hydraulics & Drive: Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections: Product inlet and outlet DN25 Vent / drain DN15 Connections according to DIN 11864-2 Drip tray available Application areas: Pharmaceutical production Biotechnology Dwodpfx Ajx Ihufjcysd Chemical industry Pre-filtration Precipitation and clarification processes Location: Germany Inspection possible by appointment Available immediately