Used Eisen Und Hammerwerk Gmbh for sale (71,841)

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm Ijdottagdepfx Am Isar The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation Iajdpfx Ajttah Rom Ijr → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Iaodpfsx Ebzqex Am Ior Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 1974, Additional title: horizontal pressure tank Capacity: 150 hl Operating pressure: 4 atm Operating temperature: 20 °C Material: Stainless steel Position: horizontal Ijdpfxsyzhv No Am Ijar Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Ijdpfoxuvk Ejx Am Ijar Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: refurbished (used), Year of construction: 2002, operating hours: 38,650 h, functionality: fully functional, Solvent system Completely overhauled. 3 tanks. Ultrasonic immersion/spraying/vapor degreasing/vacuum drying. Integrated distiller with automatic oil discharge. Automatic loading 5+5. Shopping cart dimensions 4x T520xW320xH200. Fill volume 1000L Iedpfxowndu Us Am Isar

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis Iedpfx Asywg Sbem Isar - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, Zwick/Roell Materials Testing Machine – Excellent Condition, Ready for Immediate Use For sale is a high-quality materials testing machine from Zwick/Roell for precise tensile and compression testing. The device is highly reliable and is ideal for laboratory use, quality assurance, or training purposes. Details & Features: * Application area: Tensile and compression testing of various materials * Accessories: * Various spare parts Isdpfx Ameytrqyj Isar * Workpiece holders * Spirit level * Original CDs with software and manual

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Iodpsif Ek Refx Am Isar Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Isdpefnlkwjfx Am Ijar Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut Iasdpfxefhgvws Am Ior For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. Iaodpfx Aowgc I Rom Ijr • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in Iedpfx Amswf Rg Ss Iear

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC Iedpfxewf Rgro Am Ijar version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A Iodpfswf Rg Ejx Am Ioar --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm Isdewf Rgxepfx Am Ioar The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Iasdsyz Sn Nopfx Am Ijr

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 30 ft, color: black, loading space width: 2,400 mm, loading space length: 9,000 mm, loading space height: 2,600 mm, Buy office container 21.6 m² NEW | Large open-plan office 9 × 2.4 m insulated | 30-foot office container Buy office containers directly from the manufacturer – spacious open-plan office container (21.6 m²), insulated, ready for immediate use. Ideal for construction sites, businesses, project offices, and mobile office spaces. Buy office containers – Large 30 m² office containers for flexible office solutions "Manufacturer of modular containers – tailor-made solutions as per your requirements, including custom dimensions and premium interior fittings." The 21.6 m² (9 × 2.4 m) office container from MODULE-T Germany GmbH is the ideal solution if you are looking to buy a modern office container. This spacious open-plan container offers ample space for multiple workstations and is perfect as a site office, project office, or temporary company location. Thanks to its robust steel construction, high-grade insulation and immediate operational readiness, this insulated office container is perfectly suited for year-round use. 👉 Buy your office container now – brand new, flexible & directly from the manufacturer 🟩 Areas of application - Office containers for construction sites - Site office / Site manager's office - Large open-plan office containers for companies - Project offices & team workspaces - Temporary office buildings - Mobile office container solutions 🟩 Your advantages ✔️ Office container 21.6 m² – plenty of space for multiple workstations ✔️ Open-plan office container with open space concept ✔️ Insulated office container – suitable for all seasons ✔️ Ready for immediate use ✔️ Robust steel construction – durable & stable ✔️ 100% brand new – no rental containers or used goods ✔️ Directly from the manufacturer – excellent value for money 🟩 Technical specifications - Model: OC-A9000.1 - Dimensions: 9,000 × 2,400 mm - Area: approx. 21.6 m² - Internal height: 2,400 mm - External height: 2,600 mm Construction: - Welded, powder-coated steel frame Iaedpjy A R E Njfx Am Isr Walls: - 50 mm PU sandwich panels - Optional: insulation up to 100 mm Floor: - 18mm cement fibre board + 3mm PVC covering - Fire protection class A1 🟩 Equipment (keyword-rich) - Insulated steel door - 2 PVC windows (double glazed) - Complete electrical installation - LED interior lighting - Exterior lighting - Sockets & light switches - Integrated fuse box 👉 Ready to use immediately, no additional installation needed 🟩 Options - Air conditioning (heating & cooling) - Electric heating - Roller shutters / security grilles - Custom RAL colours (e.g. black / anthracite) 🟩 Delivery & assembly 🚚 Delivery in Germany & Europe: approx. 45 days 📦 Delivery assembled or as flat-pack ⚡ Fast commissioning on site 🟩 Why MODULE-T Germany? - Over 15 years of experience in container construction - Specialist in office containers & modular systems - Europe-wide projects & delivery - Direct from the manufacturer – no intermediaries 🟩 Call-to-action 👉 Buy your office container now or request a quote 👉 Get individual advice directly from the manufacturer

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Iedeyb Hu Nepfx Am Iear Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. Isdpfx Amoyb I Azs Ijar 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Year of construction: 2019, condition: like new (used), functionality: fully functional, Box On Demand, Endless Corrugated Board, pay attention to your CO2 footprint, The machine listed here for processing endless corrugated board belongs to the series of static machines, i.e., operations across the machine are carried out while the carton is stationary. The machine is designed for high productivity. The maximum working width of the carton is 1,500 mm. All tool settings are made automatically. 1) Main Machine Body (Carton Cutting Automaton): Linear cross-cutting and cross-creasing unit for head-to-foot processing on the carton. 8 longitudinal creasing/cutting units from above for longitudinal creases and cuts in the carton 2) Double Carton Magazines 2 carton magazines provide for the supply and feeding of raw carton material to the processing machine. Iodpfoyy Iqkjx Am Isar Stack height for endless corrugated board up to max. 2,000 mm possible 3) Control Cabinet, Control System, Electronics: Contains all components required for operation and control of the system. Control cabinet components are based on HOMAG standard.

Condition: new, Year of construction: 2025, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent Iasdpfok E Hmtox Am Ijr E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Lift table with a built-in chain conveyor. Load capacity 3 tons. Platform size approx. 3200 x1200mm. Technical description : Single scissor lift table type TT3000Bsp. - 3000Kg load Ijdpfefhbupox Am Ioar - useful stroke 1600mm - Height 350mm - platform approx. 3200 x1200mm - Hydraulic unit drive with 2.2 KW motor - Switch up / down with manual switch Chain conveyor with 3 conveyor chains installed on the lifting table. - Length about 3200mm - Distance of the outer chains is 1100mm. - Drive gear motor SEW 1.1 KW - Drive is installed under the lifting platform. - Conveyor chains 3 x 1½ "roller chain German quality - conveyor speed approx. 7m / min - Stable cover plates between the conveyor chains, accessible, closed form. - Electrical switching manually via manual button dead man's switch, with function forwards / backwards. - Construction height about 300mm. Base frame substructure with adjustable feet can therefore be driven under with forklift forks. Overall height: approx. 750 mm 1 pc = Lifting table + chain conveyor + floor frame.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,030 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running Iodpfx Amsgz Hx De Iear The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: refurbished (used), - Longitudinal/transverse with manual and automatic control Iaodpfeiyyvhox Am Isr - Pick-up of the Euro pallet in longitudinal and transversal direction - load capacity 1300 kg - Basic dimensions: 1430 mm wide 1670 mm long 1854 mm high - Execution: mobile - Stroke: min. height 80mm, max. height 1030mm, stroke 950mm - Color: light gray RAL 7035 complete - power supply: 440 V - 50 Hz 1,5 or 2,2 kW - own weight: 490 kg