Used Drying Chamber for sale (3,863)

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) Bedpfxjw U Awmo Adxjww - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), 2-chamber aluminium silo standing on foot ring (plastic granulate silo) - second-hand - Bedpfx Adsf D Hygoxeww Content approx. 70.000 Ltr. diameter approx. 3.000 mm cyl. height approx. 9.250 mm Total height approx. 14,850 mm Container with upper conical bottom and lower cone on top shelf per chamber: 1 dome DN 600 1 vent connection DN 100 1 flanged socket DN 80 the lower conical bottom ends in 2 square outlet nozzles approx. DN 250 otherwise according to photos The silo is equipped with brackets for a double ladder with back protection, which can be purchased as well, price on request.

Year of construction: 2008, condition: ready for operation (used), A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible. Bsdpfx Ajxl Eltjdxeww

Year of construction: 2016, condition: good (used), Maximum temperature: 650°C Internal dimensions: Width 650 mm Depth 750 mm Height 600 mm Electrical connection: 380 V, 20.7 kW Weight: 390 kg Bsdpfxexb A E As Adxsww Space requirement: 1600 x 1200 x 1800 mm

Condition: used, functionality: fully functional, For sale: used chamber filter press – VICENTINI Technical specifications: Includes diaphragm pump VICENTINI PM 800:  • output 800 l/h • max pressure 10 bar  • 1.1 kW motor • 1 piston • 64 strokes/min  • 1½″ inlet and outlet ports 22 cast iron round plates, Ø 660 mm Manual hydraulic closure (piston-driven) Bjdpfx Adjwrwt Eexoww Approx. capacity: 350 kg per cycle Condition: working and ready to use

Condition: good (used), Year of construction: 1990, We are selling the dryer together with a moisture indicator (Elliott Bay) specifically designed for this dryer. Length without feeding and unloading equipment: approx. 29.9 m Width: 7.2 m Height (without): approx. 3.9 m Bsdpfx Aovk Ha Hsdxsww Net weight: approx. 105 t Working width: 5.00 m Drying length (continuous heated conveyor): approx. 25 m

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 Bedpfx Adjxgtqgjxoww • Cleaning brushes: 4 front and 4 rear

Condition: new, Year of construction: 2025, operating hours: 20 h, functionality: fully functional, power: 36 kW (48.95 HP), We are offering 2 x Kreuzmayr Chamber Pasteurizer KKP 360, with 4 trolleys for bottle or cans. We offer two chambers or a sale individually, always with 2 trolleys per chamber. Our current production capacity requires us to upgrade to a tunnel pasteurizer, so we are offering our chambers pasteurizers for sale. Currently they are in use at our co-packing factory. The chambers are electrically heated, with startup power requirement of 36 kW. Bwodpfxoxp Ukyj Adxow We pasteurize around 1.000 cans per hour per chamber. We can offer shipment and delivery to any country. Please feel free to inquire for more information.

Year of construction: 1981, condition: ready for operation (used), diameter 800 mm roll surface width 1800 mm heating system Sattdampf 0 0 860 Liter Bodpsw Tm Tiofx Adxeww 0 5 bar max. temperature 168 ° C range L-W-H 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works.

Condition: used, mileage: 280,000 km, Year of construction: 2010, Serial number: YV2J1F1C2AA69xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20835 Specifications: Km: Approx. 280,000 Transmission: I-Shift Air suspension Euro 5, 419 hp Tires (see pictures) 6x2 with turn on 3 1 chamber NTM on construction Volume: 18.6 m clamp Winch Rotor beam Weight Printer Rear view camera Diesel heater Radio/CD Air conditioning/AC Bed Services are taken at local workshop Ready for delivery Description:Volvo FM410 1-chamber truck from 2010.The truck is equipped with NTM superstructure that takes 18.6 m.6x2 with 3 axle swing.Ready for delivery. Km: 280000 HK: 418 Technical approved: Yes Bwedpfxowvzfae Adxjw EU-approved until: 17.09.2026 Own weight: 14565 Total Weight: 27000 Payload: 12360 Width: 255 Length: 920 Euro: 5 Model: FM410

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Bwodsxn Azdspfx Adxsw

Year of construction: 1999, condition: used, Roller shutter belts for drying painted products (chairs or similar). 3 ribbons, length 24.5 m, width 4 m Bsdpfjxrd Nkex Adxsww 3 Ribbons length 27.5 m width 2.3 m.

Year of construction: 2023, condition: as good as new (ex-display), 2 units new in stock, new machine warranty, in-stock item, available for immediate delivery Equipped with a safety system for solvent-based substances in accordance with DIN 1539. Matching loading carts available in stock (see photo). Contact us for details! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for controller: data recording via USB stick - Air circulation: 3600 m³/h - Exhaust volume: min. 390 m³/h - Additional equipment: drive-in rails - Connected load: 39 kW - Net weight: 1,150 kg - Incl. documentation, CE declaration Bsdpfx Ael Dw T Asdxjww We are happy to offer installation and commissioning services. Viewing by appointment in our warehouse. We offer new and used industrial furnaces. Contact us! Furnace, ovens, drying oven, kiln, heating oven, warming cabinet, industrial furnace, annealing oven, preheating oven, tempering oven, drying cabinet, chamber kiln, curing oven, forced convection drying cabinet, forced convection oven, solvent oven, chamber dryer

Condition: used, Vötsch Model: VC 0018 Air-cooled climate test chamber Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm Housing dimensions: Width 865 x Depth 1150 x Height 1780 mm Test chamber volume: approx. 190 liters Performance data for temperature tests: Temperature range: -10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 0.6 K/min. Cooling: 0.3 K/min. Heat compensation in the range +20 °C to +50 °C: 200 W Calibration values: +4 °C and +90 °C Performance data for climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Electrical connection: Rated voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.7 kW Bsdpfjw Swrtox Adxsww Rated current: 9.5 A (Neutral conductor plug: loaded) Schuko approx. connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R-134A Buyer Information for Your Safety! The following procedures are carried out on our climate chambers prior to sale: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Technical specifications and information subject to change and errors! Feel free to call us with any further questions.

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Bwedjxhntlepfx Adxjw

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 25 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic. Bsdpsi Igi Ijfx Adxeww Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: good (used), Chamber filter press Netzsch. 32 plates 47x47 cm. Condition: excellent. Dimensions: 320x140x120 cm. Weight approx. 1.8 tons. Bsdpfsxnx D Uox Adxsww

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Bwjdpfx Adoup R U Ujxew Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available, in stock, brand-new unit with warranty - Temperature: 250°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Volume: 9,000 liters - Control system: Eurotherm Nanodac, 100 programs with 25 segments each An additional 100 programs can be stored/loaded via FTP or USB flash drive - 2 recirculating air fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i Bwedpfxelkb Ezo Adxew - Controller/recorder with color touchscreen display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity, approx. 70 kW - Recess for easy cart entry - Documentation, CE declaration of conformity - Electrical schematic including spare parts list We are pleased to offer transport, installation, and on-site operator training for your staff. Also available as a new unit with exhaust fan and other configurations! Delivery time approx. 10–12 weeks. Please get in touch! We offer new and used industrial ovens and can also modify or upgrade them according to your requirements. Inspection by appointment is possible at any time in our machinery warehouse. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heat cabinet, recirculating air oven, chamber oven, preheating oven, chamber recirculating oven, tempering oven, annealing oven.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters Bwsdpfx Adsw Strcoxow External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 1988, condition: used, machine/vehicle number: 8829-III, max. temperature: Vorwaerm-/Haertekammer 1000/1350 °C electrical connection: 380 V kW dimensions of the machine: 1150 x 1500 x 1840 mm weight: gesamt ca. 900 kg Bjdpfxs Rxa Ne Adxeww heating capacity: Vorwaerm-/Haertekammer 9/25 kW

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 liters Operating pressure: 12 / 15 bar Bodponh Nr Iofx Adxeww Turbidity inlet: flange 2", centered Number of plates: 40 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic, Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: excellent (used), CTS Type: TS-70/1150-10 CTS Temperature Test Chamber, Water-Cooled Control: 32-bit Controller LCD Operating Panel Digital Display of Set and Actual Values Numerical Input of Set Points Error Messages in Plain Text RS 232 Interface Ethernet Interface Bodpfjw R Tunox Adxoww Free control channels for customer-side DUT (device under test) actuation Operation: capacitive touch display & PC-based control (USB/Ethernet) Test Chamber Dimensions: Height approx. 1250 mm / Width approx. 1000 mm / Depth approx. 920 mm External Dimensions: Height approx. 2000 mm / Width approx. 1800 mm / Depth approx. 1600 mm Temperature Testing: Temperature Range: -70°C to +180°C Temperature Deviation: ≤ ±0.5 K over time Temperature Change Rate according to IEC 60068-3-5 Heating: 10 K/min Cooling: 10 K/min Thermal Load: approx. 5000 W at -20°C Technical data refer to an ambient temperature of +25°C Test Volume (interior): approx. 1150 liters Operating Data: Electrical Connection Nominal Voltage: 400V 3/N 50Hz Power: 27.6 kW Nominal Current: 47.5 A Refrigeration System: Two-stage R404A (17.8 kg) + R23 (5.4 kg) Weight: approx. 1500 kg The following steps are completed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by phone.

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Bodow R Rt Iepfx Adxsww Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Bwodpfx Adjw Rz Tlexsw Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.