Used Drying Chamber for sale (3,876)

Condition: good (used), Spray booth, drying booth, paint spraying system Manufacturer: LUTRO Interior dimensions: LxWxH = approx. 750x500x400 cm Bolted steel frame construction with sandwich panels Room volume: approx. 150 m³ Two front extraction walls and supply air ceiling with 4 sections Each side fitted with 4 explosion-proof luminaires, each with 4 fluorescent tubes Front side fully openable with segment door Booth roof can be opened in the middle for entry with hall crane Two side entrance doors Complete with control cabinet, extraction motors, etc. Heating system to preheat supply air Airless spray unit 31125ä Bwodpfxjri I Nbe Adxjw

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Bodpexlzm Tjfx Adxeww Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.

Year of construction: 2025, condition: new, Drying container WISSMATEC Drying floor Hydraulic moving floor Year of manufacture 2025 Optional: - Discharge and dosing screw conveyor Bwodexd Uznopfx Adxjw - Rotary valve - Hydraulic lid - Manual lid - Cyclone - Ventilation system

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Documentation available. An on-site inspection is possible. Bwjdpext Rmlefx Adxow

Year of construction: 1996, condition: good (used), Useful dimensions: 700 x 650 x 1,100 mm Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Bedpfxexr Awte Adxjww Quench: Oil/Air Equipment: Control Siemens Simatic

Condition: used, mileage: 210,000 km, Year of construction: 2011, Serial number: YV2J1E1C5BA71xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21177 Specifications: EU approved until: 08.10.2025 Mileage: approx. 210,000 km Engine: 370 hp, Euro 5T Transmission: Fully automatic Suspension: Air – air Tires: In good condition Superstructure: 2011 Zoeller/SKK Ekopres P1453 Medium XL Autolift Roof bar with warning lights Indicators front and rear Exhaust outlet above cab Camera LED work lights Bwedpfx Aow Sc N Dodxsw Autoline sand spreaders 3 seats Air conditioning Description:1-chamber refuse compactor truck with pusher axle.Equipped with Autolift and sand spreaders.Handles waste bins up to 660 liters.Low mileage and good tires.Ready for delivery. Km: 210000 HK: 378 Technical approved: no EU-approved until: 08.10.2025 Own weight: 16000 Total Weight: 27000 Payload: 10925 Width: 255 Length: 912 Euro: 5 Model: FM370 6x2 1-kammer komprimatorbil med Zoeller påbygg Gearbox: Automatic

Condition: new, Year of construction: 2025, Screen Printing Drying Rack - 50 Grids, L x W = 70 cm x 100 cm. Outer size 110 cm x 83 cm x 148 cm. Price : 1890€ - Delivery no included The screen printing or flatbed printing drying rack, a space-saving and really useful piece of equipment for printing professionals. Designed to meet the needs of screen printing and offset printing workshops. Main features 50 grid drying racks, 70 cm x 100 cm. Dimensions movable screen drying rack: 70 cm x 100 cm, perfectly suited to a wide variety of flatbed printing media. 50 grids or layer for flatbed drying to dry a large volume of visuals. Outer size : 110 cm x 83 cm x 148 cm Robust drying trolley on wheels, offering optimum mobility and flexibility in your workshop. Bwedexqx Tbepfx Adxow

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Bodpfx Adoxp H S Ajxsww Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 32 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm Bwsdpfx Adjxpilxsxow 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 litres Performance for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm Bjdpjxgd Rdjfx Adxsww External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Year of construction: 2012, condition: used, UV drying tunnel MGI Bjdewd Hcmjpfx Adxsww

Condition: used, Year of construction: 2010, functionality: fully functional, For sale are several Rehm reflow ovens and Rehm drying ovens (lacquer dryers). The ovens are in good, cleaned condition and fully functional. 1 x Rehm VXP nitro 3850 (year 2010), type 834 (project no. 2680), location: Buchenstraße 18-20 / 93426 Roding – €3,500 negotiable. 1 x Rehm RDS 6000 (year 2014) (project no. 3718), location: Satu Mare (Romania) – €8,500 negotiable. We also offer: - Asys TRM 03 (year 2012) - Asys FPS (year 2010) - Siplace S 27 and Siplace F 5 HM (year 2006) - Exra X6 HSP (year 2008), for spare parts - Knodel drying oven (year 2015) - Nutek Coating Inverter (year 2014) - and much more Bjdpfx Aew Srqqodxsww Please contact us; we are happy to provide further information and photos of our equipment upon request.

Condition: used, Year of construction: 2006, Documented equipment / components: Year Equipment / Component 2006 Bead Apex machine with flipper – AFC1 Bwedpfxjxb Ukke Adxew 2006 Bead Apex machine with flipper – AFC2 2011 Bead Apex flipper machine – AFC3 2012 Installation / commissioning AFC3 Line setup: • AFC (Automatic Feeding & Control) • Conveyor line • Drum applier • Loop conveyor • Extruder Control system: Operator panels with visualization units

Condition: used, Year of construction: 2004, operating hours: 25,000 h, functionality: fully functional, input voltage: 400 V, total length: 5,000 mm, total width: 1,200 mm, total height: 1,200 mm, input current: 30 A, conveyor belt width: 1,000 mm, power: 20.2 kW (27.46 HP), Used drying tunnel for heat fixation, suitable for applications such as screen printing, DTG, and DTF, year of manufacture 2004, with the following specifications: Belt width: 1000 mm, total length: 5000 mm, IR hood length: 2 x 2000 mm, infeed: 700 mm, outfeed: 300 mm, 400V, 50Hz, 20.2kW. The drying and curing tunnel is equipped with infrared ceramic emitters. The unit operates via a 32-amp connection. Condition is age-appropriate, with visible signs of use. However, the system runs smoothly and reliably. All functions are operational, and the unit was in use until recently. Inspection is possible at any time by appointment. Dismantling and transport of the drying tunnel must be organized by the buyer. Bjdjxpgnkspfx Adxoww

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: Typ VAP ND, Steaming chamber external dimensions (WxDxH): 7100x2200x4250 mm. The steaming chamber has been dismantled. Bwodpfx Asxrlvxjdxjw

Condition: excellent (used), Type: VC³ 7034 Bwedpfx Adexfh Spsxsw Heraeus Vötsch Climate Test Chamber with Humidity Control (Air-Cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 780 mm x Depth 1,758 mm x Height 1,800 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ± 0.1 to ± 0.5 K Spatial deviation: ± 0.5 to ± 1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.0 K/min Cooling: 3.0 K/min Specifications for Climate Testing: Temperature range: -70°C to +180°C Temperature deviation in steady-state condition, according to IEC 60068-3-5 (depending on chamber temperature) Temporal deviation: ± 0.1 to ± 0.3 K Spatial deviation: ± 0.5 to ± 1 K Humidity range: 10% to 98% RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Protection: 16 A slow-blow fuse, provided by customer Refrigerant: R-404A/R23 Test chamber volume: approx. 335 liters Net weight: approx. 515 kg For your safety as a buyer, please note the following information: The following actions are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers undergo a documented test run. Condition: Used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further inquiries, please feel free to contact us by phone.

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control Bwsdpoiu Smbefx Adxow 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: good (used), BALZERS LTE 020 – Thermally Controlled Sample Preparation Station Bjdpexl A Edefx Adxoww ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate controls for mains and lamp • Power supply: 220V Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Bjdsxp Rbhspfx Adxsww

Condition: used, El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Temperature: max. 450°C Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm Bodpfx Ajxmhhasdxjww

Year of construction: 2023, condition: as good as new (ex-display), New machine warranty, stock item, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading trolleys available in stock (see picture). Please contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters Bodpoxp Rpfjfx Adxoww - Tmax: 260°C - Controller: P570 / 50 freely programmable programs, each with 40 segments - NtLog for controller: Data recording via USB stick - Air circulation: 3600 m³/h - Exhaust volume: min. 390 m³/h - Additional equipment: Loading rails - Connected load: 39 kW - Net weight: 1150 kg - incl. documentation, CE declaration We are pleased to offer installation and commissioning services. Inspection by appointment in our warehouse. We offer new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, preheating oven, tempering oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating air oven, solvent oven, chamber dryer

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Bjdpfoxdl Ixjx Adxeww Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Condition: good (used), Heraeus K 750/1 Tempering Furnace / Laboratory Furnace / Chamber Furnace For sale is a used K 750/1 tempering furnace from Heraeus. Technical Details: Manufacturer: Heraeus Model: K 750/1 Design: Tempering Furnace / Laboratory Furnace / Chamber Furnace Max. Temperature: 750 °C Heating Output: 3.6 kW Voltage: 400 V (three-phase) Areas of Application: Laboratory, Industry, Workshop, Heat Treatment, Metalworking Condition: Used, Working Buy Heraeus K750/1 tempering furnaces and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP. Bodpfx Asxly A Hjdxeww

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Bodpexdi Ezjfx Adxsww Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: good (used), Heraeus Thermo UT 6200 Drying Oven For sale is a used laboratory heating oven from the renowned brand Thermo – type UT 6200, made in Germany. Technical details: Model: UT 6200 Order number: 51001655 Factory number: 8907974 Max. temperature: 300°C Supply voltage: 230V Frequency: 50Hz Power consumption: 2.60kW Current consumption: 11.8A Protection class: Class 3.1 Protection type: IP 20 Temperature protection: DIN 12880/1 Bwodpfexlrzzex Adxow Condition: Used, fully functional. Slight signs of wear on the outside (see pictures). You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!