Used Drilling And Milling Machine for sale (87,922)

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Iodew Sx Agspfx Ag Dsa

Year of construction: 2011, operating hours: 8,000 h, condition: good (used), machine/vehicle number: 041-045, AUERBACH drilling and milling machine, model AX3 TLF, 2011, in good condition. Photos, dimensions, nameplate attached in the photos. Technical parameters: Longitudinal travel (X axis) table: 1600 mm Cross travel (Z axis) column: 700 mm Cross travel (W axis) drilling head: 1300 mm Vertical travel (Y axis) of the drilling head: 800-1200 mm Rotation axes: - B axis rotary table: 360 degrees - A axis drilling head: -25 to +15 degrees Drilling range - deep drilling: Diameter range: 3 - 32 mm Drilling depths in one pass: 1300 mm Maximum possible drilling depth: 1700 mm Main drive / deep drilling module: Nominal drive power: 12 / 18.5 kW Speed range: 60 - 8000 RPM Spindle torque: 115 Nm Feed drive: Feed speed: 1 - 15 (in the Y 1-10 axis) m / min rapid feed speed in all axes: 15 (Y axis 10) m / min Machine dimensions / installation site: Weight - main machine kg 12000 Installation site size: - Width: 5500 mm - Depth: 5300 mm - Height: 3400 mm Location: Kopalniana 72 Tarnowskie Góry, Poland Iedog N Tb Nopfx Ag Dsa

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module Ijdpfx Aowd Rlfjg Dja - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: excellent (used), Year of construction: 1990, High precision drilling and milling machine Aciera 22 VA Good condition from school use Year of manufacture approx. 1990 table 600 x 320 mm speed 40 - 3600 rpm speed adjustment rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 spindle diameter 65 mm drilling spindle stroke 120 mm spindle adaptor: Aciera quick change system Isdpehqm D Nofx Ag Dea Automatic thread cutting system Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1,1 KW Lamp Some quick change adapters Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical data under reserve

Condition: new, Year of construction: 2025, New semiautomatic milling-drilling machine MLA MP 34 for milling and triple drilling needed to insert the handle in pvc doors and windows Installed options: - Centering device - Right and left lateral supports L=2m Iodpfx Aowh Twxeg Dea In stock

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, We offer the CC 200, a high-performance CNC machine for the automatic cleaning of corners on PVC profiles – ideal for those seeking precision, speed, and versatility in window and door manufacturing. The machine is brand new and ready for use, designed to ensure fast processing and high-quality results thanks to its CNC system and fully automated operation. ✅ Main features: ✔ High-speed CNC system with 2 servo-controlled axes Ijdpfxow Av Nto Ag Dsa ✔ 7-position tool magazine for rapid tool changes ✔ Easy programming with Auto Learning system ✔ Ability to define and store multiple profiles and operations ✔ Suitable for standard profiles up to 200 mm ✔ Compact design fully compliant with CE regulations 📌 Technical specifications: Power: 7 kW – 380 V / 50 Hz Max stroke: 2100 mm Operating pressure: 6 Bar Weight: 1,026 kg Dimensions: 2250 × 2050 × 2050 mm

Condition: excellent (used), functionality: fully functional, OERLIKON (Switzerland) Ijdoxgcy Repfx Ag Dsa Model : UB2 Spindle taper : MT3 Vertical Travel : 590mm Spindle speed : 25-2560 rpm Table size : 700X880mm

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer Iodpfx Agow Rn Eue Dsa ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Year of construction: 2014, condition: excellent (used), Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm Isdpfjfmdcqjx Ag Doa z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° Ijdpfx Aou Idhyeg Doa table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: excellent (used), Milling and grinding machine Make: Brand Type: SP 50 SEO 30 / KS Year of manufacture: 1997 Belt sanding unit KS 30 Iedpfx Agoxmgcvs Dja Belt width: 120 mm Belt length: 2100 mm Belt speed: 14 m/s Profile sanding unit DS 40 0.75 kW 1000 rpm Spindle stub diameter: 30 x 100 mm

Condition: used, Year of construction: 2015, Axis 3 Axis 4. Aufetzachse Iodpfxswlvryo Ag Dja ja weight of the machine ca. 8,5 t

Condition: used, Year of construction: 2011, Type KDF 220 C Year: 2011 Unit controlled via display Gluing unit Iodpfx Asxc N Hvsg Dsa End trimming saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 3 mm Workpiece thickness: 8-50 mm Feed rate: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg €19,990 incl. VAT, stated on the invoice

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Head & table height adjustable. Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! Iedexl Hpaepfx Ag Dea € 1,850.00 EX VAT!

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 30 mm, travel distance X-axis: 3,000 mm, hole diameter: 35 mm, swivel angle A-axis (max.): 360 °, TECHNICAL DETAILS X-axis: 3,000 mm A-axis: 360 degrees Feed rate: 20 m/min Material thickness Z: 12 mm - 30 mm Maximum hole diameter: 35 mm Minimum hole diameter: 3 mm Maximum recess depth with saw blade: 10 mm Panel dimensions Minimum panel size X: 300 mm Minimum panel size Y: 120 mm Minimum panel size Z: 12 mm MACHINE DETAILS Iedpsxnyk Aofx Ag Dja Motor power: 0.75 HP Operating voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade

Year of construction: 1981, condition: used, Radius/flush milling machine, edge milling machine, edge milling machine, molded part milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii Iedpfxeb A Hfqe Ag Dsa -Built-in milling cutter: 30 ° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Condition: ready for operation (used), thread length: 3,000 mm, Thread milling and hobbing machine Maximum spindle bore: Ø 80 mm Depending on the travel, max. Ø 250 mm and min. Ø 20 mm are possible. Iedpev Huihjfx Ag Dea Machining length: 3000 mm With accessories: change gears, steady rest For further technical data, see the PDF file.

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Iedpfx Aew Al U Eog Dja For more information, please contact us.

Condition: used, Type: OPTIMAT F 13 Year of construction: 2001 Condition: function-tested, very good, second-hand - Workpiece thickness 16 to 55 mm - Workpiece width min. 30 mm - Inner radius min. 35 mm - Edge thickness max. 3 mm - 2 milling motors 0.4 kW - Suction connection 80 mm Iodpfxeud U Iyo Ag Dja

Condition: as good as new (ex-display), Year of construction: 2025, Spindle tilting: Yes, 0 to 45° Height adjustment: Electric / Position control Swivel adjustment: Electric / Position control Isdowhuvcspfx Ag Doa Milling stop adjustment: Electric / Position control Milling jaw adjustment: Manual / Handwheel Height display: Digital display Swivel angle display: Digital display Milling stop display: Mechanical counter Aigner integral stop: Yes Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Iodowgizdspfx Ag Dja Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Year of construction: 1989, condition: used, - workpiece thickness max. (mm): 55 - workpiece width min. (mm): 80 - Profile depth max. (mm): 80 - inner radius min. (mm): 10 - Edge material thickness max. (mm): 3 - depending on radius and edge material - milling motor: 0,5 kW, 27.000 rpm. - Electricity: 220 V - 1 Ph. - 50 Hz - Connection value (kW): 0,5 - Compressed air connection (bar): 6 - dimensions L x W x H (mm): 850 x 650 x 1430 - working table height (mm): 1000 - buffing unit: for processing thick PVC edges - Weight (kg): approx. 120 Ijdpfsk E Hrbex Ag Dsa

Condition: used, Year of construction: 1995, W A N D E R E R Model H 200 V/TNC 360 C Table size 1250 x 720 mm – Travels: X 1000 mm, Y transverse 500 mm – Max. distance from table to spindle (vertical reach 700 mm – max. reach from column face to spindle center – transverse 760 mm). Machine with automatic folding head for automatic swiveling from horizontal to vertical or vice versa – also available. Automatic tool clamping with SK 50 – Work area cabin – Electronic handwheel – Heidenhain 360-C contouring control with color graphics and electronic handwheel – Machine with approximately 30 cutter holders – Swiveling control panel, etc. 1 used, excellently preserved bed-type milling machine of very sturdy construction: Iodpfx Agjb I Iqcs Dja The machine was overhauled in 1995 for *150,000.00 DM – the overhaul work included the complete restoration of the geometry to new machine accuracy and the conversion to TNC 360 contouring control. 8 mm infeed with cutter head is no problem! Numerous SK 50 holders – machine mounts, etc. Hand-scraped guideways in top quality.

Condition: new, Year of construction: 2024, Y axis drilling: 920 mm Y axis sawing: 860 mm X axis: 3000 mm Z axis: 12 mm - 40 mm A axis: 360 ° min. Dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm Isdpfol D Rw Ejx Ag Dsa min. Hole diameter: 3 mm max. hole diameter: 35 mm motor power: 1,3 kW weight: 500 kg

Condition: as good as new (ex-display), Year of construction: 2024, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Iedpfx Asuzkxxeg Dja Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg