Used Drill Machine for sale (65,360)

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Bwodoxnlflopfx Acvok Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Bedexlqxfjpfx Acvswk Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation Bwjdpfxsfu Iwmo Acvsk It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Bwjdpfx Aefu Swxocvsk Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Bodpfx Acsfu Irzjvswk Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. Bodofu Itbjpfx Acvjwk • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Bjdpjfu Ivzofx Acvswk Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: excellent (used), Catalogue number 7689 TECHNICAL SPECIFICATIONS - Tool diameter: 16mm - Maximum drilling depth: 160mm - Maximum milling length: 160mm - Adjustment of drilling unit: forward/backward, up/down and sideways - Working table dimensions: 600x320mm - Material clamping system - Motor power: 2.2kW - Dimensions (L/W/H): 950x740x1330mm - Weight: 283kg ADVANTAGES Bwsdpfjyarazex Acvjk – Made in Poland – Very good condition – Used drilling machine Net price: 6300 PLN Net price: 1500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: new, 40 mm M 24 Bsdpeyvvq Dofx Acvowk M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: used, Year of construction: 2022, 40 mm M 24 M 30 spindle turning speed - stepless 160-2.250 U/min MK 3 spindle stroke 120 mm throat 293 mm Bodeyvvqwspfx Acvswk column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm weight 285 kg

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2.250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Bwedpfsyvvp Tox Acvek 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm weight 270 kg

Condition: new, bore capacity in steel St 60 32 mm bore capacity in cast iron GG 20 38 mm Drilling capacity in St 60 40 mm threading in St 60 M 24 Bwedeyvvptepfx Acvjk threading in GG 20 M 30 Short spindle MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 515 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117 / 701 mm feed von Hand spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45/1,9 kW weight of the machine ca. 260 kg

Condition: new, bore capacity in steel St 60 25 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514x360 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 132/724 mm feed von Hand 0 stufenlos Spindle Speed 225-4300 U/min. engine 1,0/1,6 kW voltage 400 V Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature Bwedpfx Aoyvvpgocvjk motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 100 - 1.800 U/min Bwjdpfjyvvn Nex Acvok total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm M 24 M 30 MK 3 bore stroke 120 mm throat 293 mm column diameter 115 mm 514x360 mm 2 x 14 x 224 mm 117/701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160-2.250 UpM total power requirement 1,45/1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital Bwodpfxoyvvnve Acvsk - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Bsdpfx Acoyvvm Ssvjwk Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg Bjdpfx Acsyvvmxevswk

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 Center of spindle to wall or column 293 mm spindle turning speed - stepless 160 - 2250 U/min Column diameter 115 mm Bwjdpfx Acoyvvmrsvsk spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. 🔧 Condition used (not overhauled) fully operational ready for testing inspection possible ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Bwedpfxsyy Rcpj Acvsk Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Machine weight: approx. 3600 kg 🧰 Equipment coolant system 24V lighting drilling table Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 14,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,300 mm, feed rate Y-axis: 1,300 m/min, Manufacturer: Dörries Scharman Machine: Used CNC horizontal boring mill Bwedpoyx I Dnjfx Acvok Design: Floor type Model: Heavycut 5.2 Year of manufacture: 1989 Control: Siemens Condition: Used Total machine weight: 219 tons TECHNICAL DETAILS - Spindle taper: ISO 60 - Milling head: ISO 70 - Spindle speed range: 5 – 1000 rpm (minimum 1) - Power rating: 100/90 kW - Cross section: 480 x 480 mm - Traverse speeds, feed for X, Y, V, W axes - Rapid traverse, X, Y, V and W axes - Spindle diameter: 200 mm - Travel distance X-axis: 14,000 mm - Travel distance Y-axis: 6,000 mm - Travel distance Z-axis: 2,500 mm - Travel distance V-axis: 1,300 mm - Feed travel W-axis: 1,300 mm - Max spindle speed: 630 rpm - Spindle diameter: 250 mm - Table load capacity: 80 tons - Table dimensions (L x W): 3,000 x 2,500 mm - Control system: Siemens - Number of axes: 5 (X, Y, Z, V, W) (3+2) - Spindle quill dimensions: 500 x 500 mm - Max spindle speed: 0.8 – 600 rpm - Rotary table type: S80 B - Max table load: 80 tons - Hydraulic oil: HL-46 - Lubrication oil: LAN 68 Floor Plates: - 1 piece: 2,500 x 3,000 mm - 4 pieces: 1,800 x 4,000 mm - 1 piece: 2,400 x 7,500 mm - 2 pieces: 2,400 x 8,000 mm

Condition: good (used), Year of construction: 1989, Offered from an insolvency is a ready to use tapping machine Manufacturer Fleet Model SB 15 GL year of manufacture 1989 Machine No. 34177063 Technical data: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Throat 200mm Chucks Bilz WFP 1 + inserts Bwjdpfx Ajfm S Naocvok drill chuck Röhm 0-10mm Foot switch Digital display Pinol stroke Single continuous cycle Emergency stop Speeds from 80-3150 rpm 380 volts Engine power 0,75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs. Lead screw --pitches-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions weight approx. 200kg

Condition: ready for operation (used), Ixion BT 23 FST Pillar Drilling Machine / Drill Press Speed range: 120 - 1080 rpm / 240 - 2160 rpm Spindle taper: MT 3 Quill stroke: 120 mm Bjdpfxjyybpgj Acvswk Drilling capacity (steel): 23 mm Throat depth: 260 mm Dimensions: approx. 1000 mm x 1000 mm x 1950 mm Weight: approx. 430 kg You are welcome to arrange an on-site inspection. We can organize affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net (tax-free) invoice, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop and check out our other listings. Company names and trademarks mentioned are property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications as well as errors in the item description may occur and are subject to change.

Condition: used, Year of construction: 1976, arm length 1450 mm taper MK 4 Cube ja weight of the machine ca. 3 t Bodeyn R N Dopfx Acvowk

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t Bedpfovytw Dsx Acvswk The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: good (used), Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Bwedpfx Acsywm A Hovjk Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454