Used Doosan Crawler Excavator for sale (305)

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Gbedexqfb Ejpfx Afnjh

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min Gbsdeya Ih Iopfx Afnsh spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Manual tailstock - Tool setter arm - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm -Y700mm -Z750mm 1-degree pallet indexing 60 tools Chip conveyor Gbodpfx Aoycvpfjfnjh Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: used, Year of construction: 2021, operating hours: 831 h, Doosan DX 55-9C * Operating weight: 5.5 t * Transport length: 5.85 m Gedpfxsullmdo Afnebh * Transport width: 1.88 m * Transport height: 2.56 m * Bucket capacity min.: 0.18 m³ * Track width: 400 mm * Operator protection: Kb * Reach: 6.15 m * Air conditioning * Permissible total weight: 5,500 kg * Engine: 41 kW / 56 hp * Blade support

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type bt 50 • Max. Torque: 1732 n·m Extra Information Machine still under power Gsdpeyair Uofx Afnobh Dimensions Machine Depth 8150 mm

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, spindle motor power: 3,700 W, total height: 1,730 mm, overall weight: 4,800 kg, number of axes: 5, This 5-axis DOOSAN PUMA 2000SY was manufactured in 2005, designed for precision in horizontal turning. Ideal for complex machining tasks, it offers robust performance and reliability. Consider the opportunity to buy this DOOSAN PUMA 2000SY horizontal turning machine. Contact us for more information about this machine. Additional equipment • LNS Quick Load Servo Bar Feeder Machine Benefits Technical Machine Benefits • Max. Turning diameter: 330 mm • Distance between centers: 510 mm • Type: auto turret servo • Tooling size: 25 mm (bmt) • Presetter • Coolant pump (high pressure) Extra Information Machine still under power Dimensions Gbedoyaip Hopfx Afnjh Machine Depth 3118 mm

Condition: used, Year of construction: 2022, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 4th – 6th February 2026. For more information go online. Gbedpfx Afeydc Dxsnoh

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Additional equipment Gjdpfx Aox D Drvefnjbh • Motorized bar passage with counter-spindle • Complete with accessories and LNS bar loader Extra Information Machine still under power

Condition: used, Year of construction: 2000, operating hours: 16,672 h, functionality: fully functional, machine/vehicle number: 2S080254, turning diameter over cross slide: 250 mm, turning length: 400 mm, turning diameter: 250 mm, spindle bore: 50 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, Equipment: documentation/manual, Very fast lathe, used only for finishing. Highly precise machine. Godsyi Abhjpfx Afnsbh

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,574 h, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, total height: 3,235 mm, overall weight: 13,500 kg, product length (max.): 5,000 mm, This 3-axis DOOSAN MYNX 7500 was manufactured in 2020, featuring a Heidenhain TNC 620 control with a TS 460 probe. It has a table size of 1600 mm by 750 mm and a maximum spindle speed of 12,000 rpm. With dimensions of 5000 × 4050 × 3235 mm and a weight of 13,500 kg, consider the opportunity to buy this DOOSAN MYNX 7500 vertical machining centre. Contact us for more information. Gbjdpfxox U Dtwe Afnjh • Table Length: 1600 mm • Table Width: 750 mm • Spindle Taper: ISO 40 dual contact • Maximum Spindle Speed: 12000 rpm Dimensions Machine Depth 4050 mm

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, spindle power 26/18.5 kw, Gbjdpfx Afjq T Rt Donsh Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, Gbedpewnfzcsfx Afnsh FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, Gbsdpfxexwytcj Afnsh 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Gbsdpfxexv Svmj Afnjh 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, Gbsdpew Azz Uefx Afnjh 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, Gbjdpfx Afjw Npz Ienjh 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Gbedewq Iwxepfx Afnsh Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: good (used), Year of construction: 2007, 770mm Swing, 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, Gsdpfx Ajxv Tf Nefnsbh 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light. Gedpfx Aoxv Udgsfnebh

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Gbedpfx Afoxm Sxvenoh Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, Gsdpfxswwtrbo Afnjbh 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, Gedsw I Tnijpfx Afnebh 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: used, Year of construction: 2011, For sale: 1 CNC lathe Doosan PUMA2100MS, year of manufacture 2011, including bar feeder, chuck, and tool holders. Gjdpfxexdwayo Afnjbh The machines are in very good condition, have been regularly serviced, and are ready for immediate use. They impress with their precision, reliability, and compact design – ideal for series production.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,346 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information. • Table Length: 1200 mm • Table Width: 650 mm • Maximum Spindle Speed: 20000 rpm • Spindle: EPM spindle made in Germany • Spindle Taper: ISO 40 dual contact Gsdpfjx Uq Hdox Afnobh • Tool Magazine Capacity: 30 positions • X, Y, Z Axis Scales • Linear Guideways (LM guide) • MPG Handwheel • Operation and Maintenance Manuals Included

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Gbsdpfx Afoxw Ilmonsh Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter