Used Dolev 800 for sale (8,329)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Excellent condition, very few operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn rapid programming Powertec handheld, multifunctional handheld control unit Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High Speed Jump: max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Dcedpfxezvctpj Ab Aep Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system 24.09.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 with smarT.NC, total height: 2,800 mm, total width: 2,250 mm, table width: 920 mm, table length: 900 mm, table load: 1,800 kg, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 40,000 W, number of axes: 3, This 3-axis Alzmetall GS 800/3 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN iTNC 530 control and a robust table surface area of 920 x 900 mm, supporting a maximum table load of 1,800 kg. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 800/3 machine we have for sale. Contact us for further details. - Distance Spindle to Rigid Table: 150 – 650 mm - Table T-Slots: 9 T-slots according to DIN 650 in X-direction, 14 H12 width, 100 mm pitch, 14 H7 center alignment slot, table lowered by 80 mm - Spindle Type: Water-cooled high-frequency motor spindle with hybrid spindle bearings and oil-air lubrication - Spindle Taper: HSK-A63 according to DIN 69893 -- Max. Torque: 139 Nm at 25% duty cycle - Spindle Features: New spindle in 2025, thermal expansion compensation, sealing air seal, air blow through spindle center - Rapid Traverse (X/Y/Z): 45 m/min - Max. Acceleration (X/Y/Z): 10 m/s² - Max. Feed Force (X/Y/Z): 10 kN at 40% duty cycle - Measuring Systems: Dual direct linear measuring systems for X/Y, direct linear measuring system for Z - Positioning Accuracy (Tp): 0.007 mm according to DIN ISO 230-2 - Tool Magazine: Chain magazine with 33 tool positions - Tool Change System: Pick-up system - Max. Tool Diameter: 90 mm (full configuration) / 130 mm (with free adjacent positions) - Max. Tool Length: 300 mm - Max. Tool Weight: 10 kg - Max. Total Tool Weight: 160 kg - Tool Change Time: Approx. 2 seconds - Chip-to-Chip Time: Approx. 6 seconds - Operating Voltage: 3x 400 V - Mains Frequency: 50 Hz - Total Rated Current: 55 A - Mains Supply Fuses: 63 A gG - Required Supply Pressure: Min. 6 bar - Required Network System: TN network - Transport Dimensions: Approx. 2,250 mm (W) x 4,760 mm (D) x 2,800 mm (H) - Additional Equipment & Features: - HEIDENHAIN TS 640 3D touch probe with infrared transmission - HEIDENHAIN TT 140 automatic tool measurement - HR 410 electronic handwheel - Automatic roller shutter roof cover - Scraping-belt chip conveyor (for short metal chips up to 80 mm length) - All-round sheet steel enclosure - Stainless steel interior lining of the machining area - Work area lighting - Electrically secured horizontal sliding door with mechanical locking - Control cabinet cooling- Missing/Excluded Components: Coolant tank is NOT included (no coolant tank, no pumps, no chip flushing hose) Dodpfez R Sz Eox Ab Ajcp

Condition: used, Year of construction: 1997, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 96108, total length: 3,000 mm, total width: 2,500 mm, total height: 2,800 mm, overall weight: 3,000 kg, water consumption per time unit: 10 l/min, inner diameter: 1,400 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 5 bar, reception height: 1,000 mm, input current: 50 A, injection pressure: 4 bar, temperature: 50 °C, heating capacity: 30 kW (40.79 HP), power: 37 kW (50.31 HP), load capacity: 80 kg, operating pressure: 4 bar, empty load weight: 2,000 kg, Equipment: documentation/manual, Offered for sale is a spray cleaning system with an aqueous cleaner, featuring a two-stage spray cleaning process with a spray pressure of 4 bar. The basket is rotated or pivoted. Basket dimensions: L x W x H 815 x 565 x 525 mm. Throughput: approximately 4 baskets/hour. Fluid capacities: Washing 350 liters / Rinsing 250 liters. Heating capacity: Washing 18 kW, Rinsing 12 kW. Program sequence controlled by a PLC. Exhaust air for fume extraction: approximately 500 m3/h. Accessories: 240 liters of liquid cleaner + 30 liters of rust protection. Djde Ah Hl Uspfx Ab Ascp

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Dedoz Ip N Eopfx Ab Ascp Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2012, machine/vehicle number: LC678, Used OLMOS compact eco2 linear capper labeller - glass and PET Technical Specifications & Performance DataOlmos COMPACT 800 2 is an in-line labeling and capping machine designed for bottle handling in industrial packaging and beverage production environments. Its double-position inlet configuration supports continuous integration within a bottling line, combining labeling and capping operations in one machine.Manufacturer: OlmosModel: COMPACT 800 2Manufacturing year: 2012Bottle formats: compatible with 0.5L to 5.0L bottlesContainer materials: PET and GlassFunctions: in-line labeling and cappingMains voltage: 380V ACAdvanced Automation & Control SystemsThe machine is configured for in-line operation, allowing the labeling and capping stages to be incorporated into a coordinated bottle-handling process. The double-position inlet is intended to support controlled bottle entry and reliable transfer through the operating stations. Electrical supply is specified as 380V AC.Production Line Integration CapabilitiesThis used bottling line component is suitable for integration with upstream filling, rinsing or bottle conveying equipment and downstream inspection, secondary packaging or palletizing systems. The machine handles PET and Glass bottles from 0.5L to 5.0L, providing format flexibility for beverage production and other bottled products. Its combined labeling and capping arrangement can help simplify line layout by bringing two key packaging operations together in one in-line unit.Machine type/categoryManufacturer/modelYearLabeling MachineOlmos COMPACT 800 22012Capping MachineOlmos COMPACT 800 22012Machine Condition & Maintenance HistoryThe machine is described as being in perfect working condition. This operational condition makes it relevant for second hand bottling equipment projects where a combined labeling and capping solution is required for PET or Glass bottle formats.Operational Performance & VersatilityThe COMPACT 800 2 combines labeling and capping in line for bottles ranging from small 0.5L formats through to 5.0L containers. This versatility supports production lines that require different bottle capacities while maintaining an integrated industrial packaging flow. PET and Glass compatibility makes the machine applicable to a range of beverage production layouts.Installation Requirements & Site PreparationInstallation should provide an in-line conveyor interface matched to the bottle formats, container material and production flow of the existing packaging machinery. The electrical connection must be prepared... Dcedpfx Abe Ady Dfo Asp

Condition: used, Padelttherm HGU 9408/800 Hearth Car Circulation Furnace For sale is a professional Padelttherm heat treatment system / hearth car circulation furnace, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth car furnace with circulation. Two chain conveyors are also part of the documented complete system. Technical data Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth car circulation furnace / heat treatment system Material to be treated: Aluminum housings Temperature / heating capacity Dcedpfez Hvzrjx Ab Ajp - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. total load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower heating value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Circulation - 4 burners, each with 130 kW - 2 of these with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per circulator - 2 hot gas circulation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas circulator: 2 × 4.0 kW - Combustion blower: 7.5 kW - Lift door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni, Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Clear dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth incl. track: 10,165 mm - Height incl. door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, operating hours: 198 h, functionality: fully functional, Kodak Achieve 800 V Manual S Model TEE Dodpjzlr H Djfx Ab Ascp Year of manufacture: 2019

Condition: good (used), Year of construction: 2002, X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Dsdjz Sthnspfx Ab Ascp Tool holder: SK 40 Control system: Heidenhain TNC 530i Spindle speed: 8,000 rpm Table surface: 1000 x 560 mm Equipment: Includes chip conveyor.

Condition: like new (used), Year of construction: 2017, operating hours: 12,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Dcjdpfov S E Dgsx Ab Aop Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Year of construction: 2015, condition: ready for operation (used), total width: 2,200 mm, total height: 3,500 mm, product length (max.): 3,000 mm, BVL's Niagara DFS 800-2T was manufactured in 2015. It features a useful length of 800 mm and a carrying capacity of 150 kg. The machine includes two tanks, each with a volume of 1,100 L, and operates at temperatures between 45 °C and 60 °C. If you are looking to get high-quality cleaning capabilities, consider the BVL Niagara DFS 800-2T machine we have for sale. Contact us for further details. Dcjdpfoz Ixwrex Ab Aep - Useful Length: 800 mm- Useful Width: 635 mm (Max dimensions on nameplate: 800 x 600 x 400 mm)- Useful Height: 100 mm- Charging Height: 950 mm- Carrying Capacity / Charge: 150 kg- Charges / Hour: Approx. 2-4- Tank 1 (Waschtank) Volume: 1,100 L- Tank 1 Heating Power: 36.0 kW- Tank 1 Pump Capacity: 22.5 kW- Tank 1 Pump Pressure: 4.5 bar (13.0 bar max on nameplate)- Tank 2 (Spültank 1) Volume: 1,100 L- Tank 2 Heating Power: 30.0 kW- Tank 2 Pump Capacity: 3.0 kW- Tank 2 Pump Pressure: 2.5 bar- Dryer Fan Power: 2.2 kW- Dryer Heating Power: 30.0 kW- Rotary Drive Power: 0.18 kW- Operating Temperature: 45 °C min / 60 °C max- Cleaning Liquid pH Range: 5.5 min / 11 max- Water Connection: G 3/4- Raw Water Hardness: < 2.5 mmol/l (< 14 °dH)- Raw Water Conductivity: > 250 µS/cm- Compressed Air: Min. 6 bar (according to ISO 8573-1:2010 [5:4:3])- Total Dimensions (W x D x H): 2,200 x 3,000 x 3,500 mm- Operating Voltage: 3 x 400 V / N / PE / 50 Hz / 200 A

Condition: used, Year of construction: 2018, Technical details: x-travel: 670 mm y-travel: 820 mm z-travel: 600 mm control: HEIDENHAIN iTNC 530 table surface area: D= 800 mm KESSLER mm tool taper: HSK 63 Tool changer: 96 pos. table load capacity: 1200 kg turning speeds: 18.000 1/min rapid traverse: 60 m/min total connected load: 90 kVA weight of the machine ca.: 20 t dimensions of the machine ca.: 5 x 2,5 x 3,3 m Dedpfxjzu R Ilo Ab Aocp 5-axis simultaneous machining center, table swivelling (A-axis) + / - 120°, rotary table (C-axis) axis 360 °, internal coolant supply 20 bar, 600 l with paper filter, chipconveyor, 3D infrared touchprobe, laser tool setting BLUM, el. handwheel Heidenhain, chiller for spindle, automatic roof, 5-Achsen Simultan Bearbeitungszentrum, 3x hydr. connection in table-center, 1x pneum. connection in table-center, interface for POS-Robo, POS DCM collision module, POS kinematic module, airblast through spindle, network and USB connection, rotoclear, direct measuring system, approx. 29.500 h "machine on" , approx. 10.000 h "spindle on" *

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional control unit Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer with 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Dcedpfx Aeyzxd Djb Ajp Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system 16.10.

Condition: used, Year of construction: 1979, functionality: limited functionality, filter area: 55 m², filter pressure: 15 bar, cake thickness: 30 mm, total width: 1,100 mm, total length: 6,900 mm, total height: 2,000 mm, empty load weight: 10,000 kg, operating pressure: 300 bar, number of chambers: 50, Equipment: documentation/manual, Name: Used filter press Manufacturer: Rittershaus & Blecher Type: AEHIS 800 Year built: 1979 Plate size: 800 x 800 mm Number plates: 51 (expandable to 65) Press content: Approx. 750 liters (expandable to 830 liters) Filter area: Approx. 55 m² (expandable to 60 m²) Cake thickness: 30 mm Cycle: Closed Plate transport: Automatic Plate material: Glass-fiber-reinforced plastic Filter cloth washer: No Closing pressure: 300 bar Dimensions: L 6.900 x W 1.100 x H 2.000 mm Empty weight: 10.000 kg Technical doc.: Yes, PDF Message: Pull rod clad with a stainless steel tube Accessories: A hydraulic system Dcedpfxo Afcm Sj Ab Aep Condition: Second hand Price: By request

Condition: as good as new (ex-display), feed length X-axis: 800 mm, planing width: 800 mm, Double-sided planer. In very good working condition. Dcsdpfx Abex Rryks Aep

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2016, total width: 2,510 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,880 mm, color: blue, Equipment: ABS, = Additional Options and Accessories = - EBS = Further Information = General Information Year of Construction: 2016 Registration Number: OP-52-HT Axle Configuration Tire Size: 385/65R22.5 Axle Brand: BPW Dcjdsz Hkllopfx Ab Ajp Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Lift Axle; Max. Axle Load: 9000 kg Rear Axle 2: Max. Axle Load: 9000 kg Rear Axle 3: Max. Axle Load: 9000 kg Weights Unladen Weight: 5,750 kg Payload: 33,250 kg GVWR: 39,000 kg

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Ram stroke: 6–60 mm Ram adjustment: 80 mm Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Table slots: 6 Feed Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² Dedpfx Abs Adzqae Aocp MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: excellent (used), Year of construction: 2003, Loos UH-D 800/13Bar{800kg/h} Dcedpfx Abjy E D Uve Aep

Condition: like new (used), 800 m² Schäfer R3000 storage racking system, 3 levels Used, in excellent condition, like new, see pictures. 3-level shelving system from Schäfer Including lift Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 levels Partial sale possible Negotiable price: upon request! Dodpohzw Ivefx Ab Aecp Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, details and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel structures immediately available • 30–50 semi-trailer loads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking, or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough cleaning. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC turning machine Okuma LB 3000 EX II MYW 800 Control system: OSP-300L Year of manufacture: 2014 Internal machine number: 75 Distance between centers or spindle noses: 1085 mm Turning diameter over slide/bed: 340 / 580 mm Travel in X-axis: 260 mm Travel in Y-axis: 115 mm Dodpfx Abszz Ihvs Aocp Travel in Z-axis: 1,010 mm Travel in C-axis: 360 mm Travel in W-axis: 895 mm Spindle bore: 72 mm Main spindle speed: 45 - 5,000 rpm Counter spindle speed: 45 - 6,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: Chip conveyor Touch probe Parts catcher Bar feeder IRCO MUK 7012 Bar length: 1250 mm Coolant system TM 24, 8 bar

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,514 h, spindle speed (max.): 18,000 rpm, overall weight: 20,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2021. It features an X-axis travel of 670 mm, Y-axis travel of 820 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U universal machining centre we have for sale. Contact us for further details. - Coolant Supply: 40 bar- Nominal Power: 90 kVA- Input Voltage: 400 V, 50 Hz (3-Phase)- Full Load Current: 125 A- Max. Current Load: 200 A- Short-Circuit Strength: 25 kA- Included Equipment: Documentation/Manual, Chip Conveyor, Coolant System & Filtration Unit- Condition: Very good, fully functional; completely inspected by manufacturer at the end of 2025 (receipts available)- Spindle Hours: 11,514 h- Machine Power-On Hours: 20,954 h- Control Power-On Hours: 22,231 h- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining) Dodpfxsznktue Ab Aocp

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic horizontal bending and straightening press Dcodpfx Abed A Nc Dj Asp - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, suspension: air, tire size: 385/65, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle = More information = General information Year of construction: 2003 Axle configuration Tyre size: 385/65 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Dcodpfx Ao Ah Eqaob Asp Axle 1: Lift axle; Max. axle load: 9000 kg Axle 2: Max. axle load: 9000 kg Axle 3: Max. axle load: 9000 kg Weights Empty weight: 6.800 kg Carrying capacity: 32.200 kg GVW: 39.000 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, table width: 350 mm, table length: 850 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between November 16, 2026, and November 26, 2026! The machine’s spindle was recently replaced! TECHNICAL DETAILS Travel distance X-axis: 800 mm Dcedpjz Il Nzsfx Ab Asp Travel distance Y-axis: 500 + 50 mm Travel distance Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool positions: 40 Table length: 850 mm Table width: 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Weight: 10,000 kg EQUIPMENT Chip conveyor KNOLL Paper band filter system KNOLL Zero-point clamping system SCHUNK SDE 138 Tool holders and tools in the tool changer Measuring probe as shown in the pictures Note: A truck with a width of 3,000 mm is required for transport. External reference: Wittner - Lot 11

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 745-006-1, total height: 4,050 mm, ram adjustment: 60 mm, total width: 1,650 mm, total length: 3,000 mm, drop-through hole in table: 160 mm, pressing force: 100 t, distance between side stands: 420 mm, overall weight: 16,000 kg, DGUV certified until: 10/2027, year of last overhaul: 2014, Raster die-cutting machine Stroke rate: 20 - 220 Table area: 700 x 1000 Stroke adjustment: 20 - 90 mm Dsdpoz Ekvusfx Ab Aecp Unidor Compact Press Raster roller feed, hydraulic CE 2014 – complete system Weight approx. 16,000 kg Accessories: Kemmerich strip feeding system Safety fence

Condition: good (used), Year of construction: 2020, operating pressure: 310 bar, pump capacity: 42 l/min, Graco Premier 42 liters/minute 6.9 GPM Ratio 45:1 310 bar / 4500 psi 2 units for sale Dcsdpfx Absy Ul Dkj Asp Price per unit: €900