Used Dolev 800 for sale (8,304)

Condition: good (used), filter area: 21 m², pressure: 15 bar, cake thickness: 25 mm, System: Chamber filter press Rittershaus & Blecher Type: 0-22-080-2230-00 Design: Chamber filter press Filter plate format: 800x800/59 Cake thickness: 30 mm Year of construction: 1989 Number of plates: 24 pieces Filter cloths: optionally available in coordination with the medium Press capacity: approx. 310 dm3 / final capacity approx. 430 dm3 Filter area: approx. 21 m2 / 29 m2 Filter pressure: approx. 15 bar Dimensions LxWxH 5480x2000x2660 mm Cpsdpfx Agsqakdbszow Safety device: e.g. light barrier etc. optional by arrangement Purchase or rental: Inspections of the systems by arrangement at our factory. Miscellaneous: We can supply the system used and ready for operation or refurbished according to your wishes and requirements; would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Cpodpfx Ajqakhujgzow Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: used, System: Membrane filter press / chamber filter press, used Type: Andritz 800/75 membrane chamber filter press Application area: Sludge dewatering, sludge treatment Year of manufacture: 2008 Filter plate format: 800x800 mm Number of plates: approx. 75 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available, tailored to the medium Press volume: approx. 1000 dm3 Filter pressure: approx. 15 bar Plate closure: electrohydraulic Control cabinet: optional Cpedpfx Agswqygfozew Purchase or rental: Inspection of the system at our site by arrangement.

Condition: used, System: Chamber filter press Type: Chamber filter press 800/71 Design: side bar guided Year of manufacture: 2002 Cpedpfjwqzhqjx Agzsw Figure No.: 021 Filter plate size: 800x800 mm Number of plates: 71 Filter plates: PP Cake thickness: 25 mm Filter cloths: optionally available according to the medium Press volume: approx. 800 dm³ Filter pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate transport: automatic Pump technology: optional Hydraulic unit: yes Control cabinet: yes Purchase or rental: Inspections of the systems can be arranged at our plant.

Condition: good (used), Year of construction: 1980, filter area: 98 m², pressure: 15 bar, cake thickness: 25 mm, Plant: used mobile chamber filter press / filter press Manufacturer: Filox 800 x 800 Year of construction: 1980 Plate size: 800 x 800 mm Effective length: 5200 mm Number of chambers: 88 pieces Cake thickness: 25 mm Filter pressure: 15 bar Closing pressure: Min. 300 bar, max. 320 bar Total filter area: approx. 98 square meters Total cake volume: approx. 1100 liters Motor voltage: 380 V, 50 Hz Protection class: IP 44 Plate material: PP Cpodpsqa Dtqsfx Agzow Drain: open Operating side: left Cloths: Optional

Condition: used, System: Chamber filter press Type: Chamber filter press 800/68//80 Design: Side beam guided Year of manufacture: 1990 Machine No.: 02L53/319/665SL Filter plate size: 800x800 mm Codpfx Agewqzd Sszepw Number of plates: 68 / final expansion approx. 80 Filter plates: PP Cake thickness: 25 mm Filter cloths: optionally available matched to the medium Filter area: approx. 132 m² Press content: approx. 970 dm³ Filter pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate transport: automatic Pump technology: optional Hydraulic unit: yes Control cabinet: yes Purchase or rental: Inspections of the systems by appointment at our facility.

Condition: used, total height: 2,000 mm, total width: 2,300 mm, total length: 3,000 mm, Empty weight: 3.200 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 800 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 500 - Table length [mm]: 1050 - Table width [mm]: 625 - Tool holder: ISO40 - Min. spindle speed [rpm]: 32 - Max. spindle speed [rpm]: 1600 - Options: Digital readout - └ Type of digital readout: Heidenhain Cjdpfxjwnif So Agzjpw - Transport dimensions: 3000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 02/2027, total width: 790 mm, total height: 1,080 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 1,080 mm, space requirement width: 790 mm, NEW NEW Bread Slicer NEW NEW Model: Varia VMP 800 Easy operation 200 slices/min Cutting width/bread length: 380 mm Rotary blade machine Manual operation Adjustable slice thickness from 4 to 30 mm Dimensions: 790 x 746 x 1080 mm (W x D x H) Max bread size: 380 x 340 x 160 mm (L x D x H) DGUV V3 tested exclusively by us Connection: 230V, 1 kW Brand new machine & SAB tested With warranty + spare parts service Options: Codeuirznspfx Agzopw - Stainless steel version 600 - Automatic bread clamp - Bag holder - Special colors - Front bread rack - Maintenance contract - Service package - Training & commissioning - Leasing & rental service Many top bread slicers in stock!

Condition: excellent (used), Steadies for lathe VDF BOEHRINGER Type: V 800 1. Fixed steady 1. Travelling steady Cjdjyfny Ujpfx Agzspw In very good condition.

Condition: excellent (used), Year of construction: 2011, operating hours: 34,217 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, total length: 5,940 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 8,300 kg, Injection Moulding Machines ARBURG Allrounder 570 H 2000-800 Stock No.: 503669 Manufacturer: ARBURG Model: Allrounder 570 H 2000-800 Cpedpsydkyzjfx Agzow Control System: Selogica Year of Manufacture: 2011 Operating Hours: 34,217 h For sale is a used ARBURG Allrounder 570 H 2000-800, year 2011. This machine features a screw diameter of 50 mm and a clamping force of 2000 kN. Ideally suited for efficient and precise injection moulding applications in plastics processing. Contact us for further information and a customised offer! Technical Data – Clamping Unit Clamping force: 2000 kN Tie bar spacing (h x v): 570 x 570 mm Platen size (h x v): 795 x 795 mm Min. mould height: 250 mm Max. mould height: 550 mm Max. daylight: 1000 mm Opening stroke: 450 mm Ejector stroke: 200 mm Ejector force: 60 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 1300 kg Technical Data – Injection Unit Screw diameter: 50 mm Shot volume: 392 cm³ Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 1000 Nm Free-flow injection rate: 656 g/s PS Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions (LxWxH): 5.94m x 2m x 2.21m Total weight: 8300 kg Equipment HMI in German Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Mould heating 12x

Condition: good (used), Year of construction: 2000, operating hours: 59,358 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, For sale is an injection molding machine of the brand Arburg and the type 370 Selectra 800-350 The machine is well maintained and fully functional SD card drive retrofitted Video available soon Technical data Csdpfx Agjrywlqozopw Year of construction: 2000 Clamping force: 800 kN Control system: Logica Screw diameter: 35 mm Pumping hours: 69544 h Automatic operation: 59358 h On request, for an extra charge, the machine can be delivered throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). We are happy to assist with this. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. Cpedpfx Aoylyhdsgzjw 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Cpjdjn Dw Nkjpfx Agzow

Year of construction: 2008, condition: used, machine/vehicle number: 575415, Weight: 6,700 kg, various peripherals, control unit, 1 handling system OPS INGERSOLL IMC 5, year of manufacture: 2008, serial no.: 583080, weight: 1,800 kg, 1 chiller unit M.T.A. TAE EVO M10, year of manufacture: 2012, 1 fire extinguishing system KRAFT & BAUER FB 703 Cpsdpfxeyidk Is Agzjw

Year of construction: 2016, condition: repair required (used), functionality: unexamined, HS 800 basic package Spiral shaft screen deck AA209-150 Special paint finish: Green Codpfx Agovm Uqrszspw

Year of construction: 2021, condition: ready for operation (used), functionality: unexamined, Basic package Selector 800 Lower belt BB 1350 mm AA 6.4m -profiled belt- Codpjvm Upnsfx Agzjpw SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts

Condition: excellent (used), Year of construction: 2008, CNC Machining Centre WAGNER WMC 800 R 2008 Siemens 810 D Cedpfx Agsyhdwnszjpw Technical data: X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 510 mm Table height: 830 mm Max. tool length: 250 mm Tool diameter: 80 mm Clamping area: 800 x 450 mm Number of tool stations in magazine: 20 Spindle speed range: 8000 rpm

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 107.33.99.047, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 3,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 3,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, table width: 590 mm, table length: 1,000 mm, overall weight: 6,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 36, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 90 mm, Equipment: chip conveyor, MIKRON VCP 800 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Connection: 40 kW - Max. recommended feed rate: 15 m/min - Max. feed force: 5000 N Cpjdpsyild Njfx Agzew - Max. tool outreach up to 1000 rpm: 350 mm, up to 4000 rpm: 250 mm, up to 10000 rpm: 200 mm - Max. tool length: 250 mm without taper - Tool diameter: 90 mm (fully loaded), 110 mm (partially loaded) - Table with 8 T-slots - Incl. chip conveyor Note: The vises on the clamping surface are not included in the scope of delivery! Important: The item must be picked up on a binding date between 24.03. and 26.03.2026, to be agreed upon. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: ready for operation (used), LIEBHERR - LORENZ S800 / Gear Hobbing Machine - Well-maintained machine with extensive accessories - 1x pallet / change gears - 1x pallet / hobs - 1x pallet / arbors - DOCUMENTATION - Max. workpiece length with tailstock 600 mm - Max. workpiece length with retracted tailstock 800 mm - Max. traverse of milling slide 360 mm - Maximum pitch cut on largest workpiece 5 PI / in standard range 8 PI - Spindle taper – milling spindle MK 5 - Milling arbors 22 / 27 / 32 / 40 mm - Max. milling diameter 186 mm - Max. milling cutter length 170 mm - Max. cutter shift 80 mm - Milling speeds 40 – 220 rpm Cpjdpfoyl Slhjx Agzjw - Infinitely variable feed rates / horizontal - Infinitely variable feed rates / vertical - Infinitely variable feed rates / tangential - Clamping table without coolant trough 550 mm - Clamping table bore 100 mm - Arbor taper MK 5 Dimensions (LxWxH): 3.6 x 1.8 x 1.9 meters / Weight: 5,000 kg Errors and omissions excepted.

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor Cjdpfjbqqzgex Agzopw -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: new, neu Bulgarien 460 € 2276.69 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 M 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp Cedpfx Ageyq Sq Ujzjpw operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 105 510,00 turning length2.000 mm € 109 230,00 turning length4.000 mm € 128 740,00 turning length5.000 mm € 139 980,00 turning length6.000 mm € 156 880,00

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table length: 3,500 mm, table width: 820 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 35 rpm, table load: 2,500 kg, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Cjdoxftkqepfx Agzspw Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2009, condition: good (used), MAJA RVE 800 S flake ice machine Flake ice cream machine is versatile: For churning in the production of scalded sausage Production of bakery products and dough pieces Cooling of fish and seafood Filling fresh food counters in supermarkets, Delicatessen departments Decorative cooling of buffets Cpsdpfx Agskx Hv Iszsw Year of construction 2009 Ice capacity 800 kg/24h Power 400 V, 740 W Refrigerant R404A For connection to external refrigeration unit (not included) Approx. dimensions: 150 x 147 x H 240 cm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more scales - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2019, total width: 2,550 mm, total height: 1,750 mm, suspension: air, color: black, Year of construction: 2019, Axle configuration Make axles: Renders Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.600 kg Carrying capacity: 33.400 kg GVW: 39.000 kg Functional Extendable superstructure: Yes Cpjdpjx U D T Dofx Agzow Maintenance, history and condition APK (MOT): tested until 04/2026 Technical condition: very good Visual appearance: very good Identification Registration number: OV-03-ZB Additional information Please contact Arie or Pedro for more information

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2019, total width: 2,550 mm, total height: 1,750 mm, suspension: air, color: black, Year of construction: 2019, Axle configuration Make axles: Renders Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.600 kg Carrying capacity: 33.400 kg GVW: 39.000 kg Functional Extendable superstructure: Yes Maintenance, history and condition APK (MOT): tested until 04/2026 Technical condition: very good Visual appearance: very good Identification Registration number: OV-04-ZB Additional information Cpodpjx U D Tdofx Agzsw Please contact Arie or Pedro for more information