Used Binder Fed 720 for sale (60)

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Hsdpfxjxzukko Adbsi Maximum pre-fuse: 16A Frequency: 50/60Hz Electrical connected load: 4.5kW Temperature range: +12°C above ambient temperature up to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heat-up time to 150 °C: 25 minutes Recovery time after 30 s door opening at 150 °C: 6 minutes Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per shelf: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Max. number of shelves: 16 External dimensions: Width: 1,235 mm Height: 1,025 mm Depth: 765 mm Internal dimensions: Width: 1,000 mm Height: 800 mm Depth: 510 mm

Condition: excellent (used), Binder Model: MKF 720 E3.1 Temperature and Climate Test Chamber Air-cooled Temperature range: -40°C to +180°C Humidity range: 10% r.h. to 98% r.h. The MKF climate test chamber is a specially developed environmental simulation chamber for industrial material testing and environmental simulation. It offers unmatched performance, significantly exceeding the capabilities of conventional heating chambers. It is suitable for all applications required in material testing, aging, and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm, Height: 2005 mm, Depth: 1230 mm Internal dimensions: Width: 1200 mm, Height: 1020 mm, Depth: 600 mm Interior volume: 734 liters Net weight (empty): 590 kg Max. total load: 160 kg Max. load per shelf: 40 kg Performance Data, Temperature: Temperature range: -40°C to +180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.1...1.8 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.8 K/min Max. heat compensation: 6500 W Performance Data, Climate: Temperature range: 10...95°C Humidity range: 10...98% r.h. Hsdpfx Adsymcqdjbei Temporal temperature deviation depending on setpoint: 0.2...1.5 ± K Max. heat compensation: 1000 W Electrical Data: Nominal voltage: 400V 3N~ ±10% 50Hz Nominal power: 11 kW, 19.2 A Refrigerant: R404A, 5 kg Important notice: 'The table shown in the photos is not included in the sale.' Buyer safety information: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with regulation-compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and error!) Further questions? Feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus”. This device is not a standard laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Key Added Value: The unit is designed to reliably detect, monitor, and contain critical battery events safely—including up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do specifically? (Section 2 – Performance & Application) – Conduct aging tests on lithium-ion cells – Performance tests (charge/discharge cycles under temperature) – Continuous temperature runs and thermal cycling tests – Testing of non-energized and cyclically energized cells – Reproducible, precise temperature control throughout the entire usable space – Safe execution of tests under realistic thermal conditions – Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: – Battery & cell manufacturers – Research and development laboratories – Test laboratories & safety testing – Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: – Automatic & manual CO₂ fire suppression system – Smoke detector with optical & acoustic alarm – Mechanical double door locking (secure containment) Hjdpox Hf A Rofx Adbei – Spark protection in the interior compartment – Exhaust connection with reversible overpressure flap – Connections for external inerting (e.g., nitrogen) – Emergency stop / manual release of extinguishing system – Ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur, but not explosion or uncontrolled propagation. This is not an abuse or destruction test device, but a secure, standard-compliant test chamber for real-world operating and fault scenarios. Technical Core Data: – Temperature range: –5 °C to +100 °C – Interior volume: approx. 698 liters – Shelves: 4 × stainless steel – Max. load per shelf: 45 kg – Max. total load: 100 kg Electrical Data: – Mains connection: 200–240 V AC – Frequency: 50/60 Hz – Phases: single-phase – Power consumption: approx. 2.1 kW – Circuit protection: 16 A – Refrigerant: R134a – Protection class: IP 20 Dimensions & Weight: – External (W × H × D): approx. 1250 × 1950 × 900 mm – Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? – Genuine battery safety test chamber – Suitable for EUCAR Hazard Level 5 – Integrated CO₂ extinguishing system – Large chamber (≈700 l) – High market value & resale attractiveness – Weight: approx. 285–300 kg – Condition: used – Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to answer your call.

Condition: like new (used), Year of construction: 2025, Binder KBWF 720 Growth Chamber, ex-demo from 2025, like new. Temperature range: 0°C to 70°C Temperature range with lighting: 10°C to 60°C Humidity range from 10 to 80% relative humidity Adjustable lighting cassettes The KBWF series fitotron chambers utilize natural lighting to provide uniform and consistent conditions for illumination, humidity, and temperature. These chambers are ideal for plant and other organism cultivation, as the homogeneous light distribution and humidity regulation stimulate growth, similar to the constant temperature maintained in climate chambers. Temperature can be displayed in the range of 0°C to 70°C with an accuracy of one tenth of a degree, and humidity with an accuracy of one tenth of a percent. The device is equipped with a microprocessor that effectively controls the humidification and dehumidification system. Humidity regulation is carried out using a capacitive humidity sensor and steam humidification. Advanced program controls allow for precise climate condition management, even over extended periods. Standard KBWF series chambers feature variable-position lighting cassettes, each equipped with five daylight fluorescent tubes. Special plant growth fluorescent tubes are also available, providing an ideal spectrum for photosynthesis, making these chambers suitable for simulating perfect climatic conditions in plant biotechnology, forestry, and agriculture. Climate chambers with integrated lighting and humidity control are also suitable for the pharmaceutical and chemical industries, basic quality assurance research, and materials testing. Devices are equipped with a controller featuring time-segment programming and a color LCD monitor for convenient operation. Key features: Hsdpfeyahm Rex Adbsi - Preheating chamber technology e™ - Adjustable fan speed - Humidity control via capacitive sensor and steam humidification - Intuitive touch-screen controller with time-segment and real-time programming - Internal data logger, measurement values in open format readable via USB - Device self-test for comprehensive status analysis - Airtight inner safety glass door - Glass corrosion prevention with special TIMELESS coating - Data display on a color LCD monitor - Stainless steel wire shelves - 30 mm access port with silicone stopper on the left side - Class 3.1 temperature sensor with visual and acoustic temperature alarm - Computer connection interface: Ethernet - Door heating

Condition: like new (used), Binder KBW 720 (2024) – Phytotron Chamber, Perfect Condition, Showroom Machine Model: Binder KBW 720 Year of manufacture: 2024 Condition: Like new – used exclusively as a demonstration unit after manufacturer testing Capacity: 720 liters Type: plant growth/climate/stability simulation chamber (phytotron) Power supply: 230 V Warranty: Yes (start-up) VAT Invoice: Yes Availability: Immediate Location: Grabina 92-701, Poland ——— Description: For sale: Binder KBW 720 climate chamber – a premium-class device for stability testing, plant growth simulation, and pharmaceutical & climatic research. The KBW 720 model combines a large working chamber (720 liters) with precise temperature and lighting control, making it an ideal choice for research institutes, laboratories, the pharmaceutical industry, and the agri-food sector. The unit was used solely as a demonstration exhibit – factory condition, ready for operation. ——— Technical data: • Temperature range: from +5°C to +70°C • Chamber capacity: 720 liters • Fluorescent lighting up to 15,000 Lux (programmable) • e™ – uniform temperature and light distribution • Stainless steel interior – easy to clean and disinfect • Programmable controller with LCD screen • Integrated data logger, USB port • Quiet operation, energy-saving technology ——— Applications: • Climatic testing under controlled lighting conditions • Phytotron-based research on plants and seeds • Stability tests in accordance with ICH guidelines • Use in pharmaceuticals, biotechnology, veterinary medicine Hsdpjw Nvbzefx Adbei ——— Why choose this unit? • Condition like new – no signs of use • Available immediately – no factory lead time • Perfect alternative to new equipment – at a lower price • Option for online demonstration or on-site visit • Technical support and optional extended service (delivery possible)

Condition: like new (used), Year of construction: 2025, Binder FD 720 Dryer from 2025, like new PRODUCT DESCRIPTION The BINDER FD Avantgarde.Line series dryer is designed for situations where especially fast drying and sterilization are required. Thanks to uniform temperature distribution, rapid dynamics, and an efficient fan, this dryer helps save valuable time. MAIN FEATURES Hsdpfsyahp Sex Adbsi Temperature Range: - Ambient temperature plus 12°C up to 300°C - Up to 30% lower energy consumption than leading market devices - High temperature accuracy with APT.line™ technology - Forced air convection - Controller with LCD display - Electromechanical exhaust air flap control - 2 chrome-plated wire shelves - Integrated, independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm - Ergonomic handle design - USB port for data recording

Condition: like new (used), Year of construction: 2025, Binder M 720 Laboratory Dryer, Like New, Year 2025 Hedpfoyahnusx Adbsi PRODUCT DESCRIPTION The M series material testing chambers, featuring a maximum temperature of +300°C and multiple programming options, are perfectly suited for materials testing and ageing studies. Thanks to high airflow, high-performance fans provide rapid heating. KEY FEATURES Temperature range: +14°C above ambient temperature up to +300°C High temperature accuracy thanks to APT.line™ technology with increased heating capacity Reinforced fan with adjustable speed Electromechanical exhaust air flap control Intuitive controller with touchscreen and programmable time-segment and real-time functions 2 chrome-plated racks Independent, adjustable class 2 (DIN 12880) temperature safety device and optional independent class 3.1 (DIN 12880) temperature safety device with visual/acoustic alarm selectable on the controller Failsafe function – backup Pt 100 sensor PC interface: Ethernet Internal data logger; measured values can be read in an open format via USB

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum circuit breaker: 16A Frequency: 50/60Hz Electrical connected load: 3.4kW Temperature range: +5°C above ambient temperature up to 300°C Spatial temperature deviation at 150°C: ± 3.8K Temporal temperature deviation at 150°C: ± 0.7K Heating-up time to 150°C: 29min Recovery time after 30 s door opening at 150°C: 6min Air exchange rate at 150°C: 18x/h Interior volume: 400l Maximum load per shelf: 35kg Maximum total load: 90kg Energy consumption at 150°C: 1,200Wh/h Maximum number of shelves: 10 External dimensions: Width: 1,235mm Height: 1,025mm Hsdexzulnepfx Adboi Depth: 765mm Internal dimensions: Width: 1,000mm Height: 800mm Depth: 510mm

Condition: like new (used), Binder MK 720 E5 Climate Chamber from 2025 Ex-demo chamber, virtually as new. Fully tested, in perfect working order, ready for operation. PRODUCT DESCRIPTION The BINDER MK series chamber is designed for all thermal testing from -40°C to +180°C. For cyclic temperature testing, the MK chamber is a cost-effective alternative to expensive custom solutions. KEY FEATURES Temperature range: -40°C to +180°C Hsdpfx Adex I A I Hsboi APT.line™ preheating chamber technology Programmable anti-condensation protection for samples Heated observation window with internal LED lighting BINDER Multi Management Software APT-COM™ Basic Edition Diagnostic system with visual and acoustic alarms Intuitive touchscreen controller with time-segment programming and real-time programming Internal data logger, measurement values in open format readable via USB 2 access ports (80 mm) with silicone stoppers, left and right Independent, adjustable Class 2 temperature safety device (DIN 12880) with visual alarm 4 casters, two with brakes PC interface: Ethernet Ramp function programmable Built-in line recorder Real-time clock Heated door 1 stainless steel wire shelf Stainless steel interior Halogen-free refrigerant R-452A Cooling provided by compressor unit

Condition: excellent (used), Binder FED 400 Laboratory Oven Temperature range: from 5°C above ambient temperature up to 300°C – Classic.Line series - Stainless steel interior, powder-coated exterior - Digital temperature setting with 1°C increments - Digital controller with integrated timer - Timer allows setting switch-on, switch-off, and temperature holding time countdown from 0 to 99 hours 59 minutes - APT.Line preheating system - Digitally adjustable fan speed - Class 2 (DIN 12880) temperature safety device with visual alarm - Two chrome-plated shelves included as standard - Maximum number of shelves: 10 pcs - Maximum total load: 90 kg - Maximum shelf load: 35 kg - Dimensions including fittings and connections (L x H x W): 1235 x 1025 x 765 mm - Internal dimensions (L x H x W): 1000 x 800 x 510 mm - Computer interface: RS 422 Hjdpfxsxanx Ss Adbji - Net weight: 145 kg - Internal volume: 400 L - Power supply: 400 V

Condition: like new (used), For sale: Binder FED 260 Laboratory Drying Oven – Ex Demo, Year 2025 We offer a high-quality Binder laboratory drying oven, model FED 260, originating from a showroom demonstration (ex demo). The unit was manufactured in 2025 and is in virtually as-new condition – tested by the manufacturer and ready for immediate use. Technical Specifications: • Model: FED 260 • Manufacturer: Binder (Germany) • Airflow type: Forced convection • Chamber capacity: 260 litres Hodpfx Aev Nw Ncedbei • Temperature range: +10°C above ambient to +300°C • Power supply: 230 V • Year of manufacture: 2023 • Condition: Ex demo – the device was used exclusively for display and demonstration purposes Advantages: • Excellent temperature uniformity throughout the chamber • Reliable and energy-efficient operation • Ideal for research, industrial, and quality control laboratories • Supplied complete with documentation and shelves Why choose this unit? • Attractive price compared to a brand-new model • No signs of use – the unit is in like-new condition • Immediate availability We can arrange transport throughout Europe.

Condition: excellent (used), operating hours: 100 h, PERFECT CONDITION, purchased in December 2016 Used for about 100h New price is 46808 EURO Hjdsvldnqepfx Adboi The MKF series environmental simulation chamber from BINDER is ideal for all cold and heat tests, carried out on the basis of recognized temperature and climate test standards in accordance with DIN and IEC. High operating comfort and extensive standard equipment have obvious advantages in everyday use. Key features Temperature range: -40 °C to 180 °C Humidity range: from 10 to 98% relative humidity Integrated 20 L water tank 4 potential-free relay contacts e™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with internal LED lighting Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ 4 Basic Edition Diagnostics system with optical and acoustic alarm Intuitive touchscreen controller with time interval programming and real-time programming Internal data logger, measured values in open format can be read via USB 2 access ports with 80 mm silicone plug, left and right Independent, adjustable temperature protection class 2 (DIN 12880) with optical alarm 4 castors, two with brakes 230 V socket on the side panel on the right Ramp function can be set Integrated line recorder Time clock actual Door heating Alarm message in the event of lack of water in the fresh water tank 1 stainless steel wire shelf Protection against leaking hoses, covering the water supply and discharge pipes up to a height of 1 m Stainless steel interior Halogen-free refrigerant R-404A Cooling provided by a compressor unit

Condition: used, functionality: fully functional, With this offer, you are purchasing a used accessory, the ‘Ricoh RB5020 ring binder’. Hedpfxoxzqhfs Adbei Item for sale: 1 x Ricoh RB5020 suitable for the following models: Ricoh Pro C7200 series Ricoh Pro 8200 series Ricoh Pro C9200 series Please check in advance whether this accessory is suitable for your machine. Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test binding can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: Hodsynh E Aspfx Adboi - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone. Hedsyma Nwepfx Adbji

Condition: excellent (used), Binder Model: Binder MKT 240 E3 Climate Test Chamber / Temperature Simulation Chamber –70°C to +180°C | 400V For sale is a professional environmental simulation chamber from BINDER, model MKT 240 E3. This unit is ideally suited for temperature testing in industry, research, quality assurance, as well as electronics and material testing. Features: Hodpfx Adsylxvyobji - Temperature range approx. –70°C to +180°C - 240 L usable capacity - 400V 3-phase power supply - Power consumption: 6.5 kW - Precise microprocessor control - Low-temperature technology with R404A / R23 refrigerants - Heavy-duty industrial design - Made in Germany Technical Data: Model: MKT 240 E3 Voltage: 400 V / 50 Hz / 3~ Power: 6.5 kW Rated current: 11.3 A Max. temperature: 180°C Refrigerant: R404A / R23 Max. operating pressure: 25 bar Interior dimensions: approx. 600 x 650 x 600 mm External dimensions: approx. 925 x 1,825 x 865 mm Weight: approx. 320 kg Condition: used Scope of delivery: (see picture) (Specifications and data are subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C Hsdpfxsyg D Drs Adbji - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Year of construction: 2010, condition: excellent (used), Binder KBWF 240 Growth Chamber Features: Temperature range: 0°C to 70°C Humidity range: 10% RH to 80% RH APT.line preheating chamber technology Adjustable fan speed Humidity control with capacitive humidity sensor and steam humidification Intuitive touchscreen controller with time-period and real-time programming with internal measurement recording Hodpfx Asvtlq Njdbsi Display via LCD color monitor Tight-closing inner door made of toughened safety glass (ESG) with special TIMELESS coating 2 stainless steel shelf racks Lead-through opening with 30 mm silicone plug, left side Class 3.1 temperature safety device (DIN 12880) with visual and audible temperature alarm Computer interface: Ethernet Door heating Maximum load: 51 - 100 kg External width: 925 mm Inner width: 650 mm External height: 1465 mm Inner height: 785 mm External depth: 800 mm Inner depth: 485 mm Internal volume: 201 - 300 l Weight: 214.00 kg Year of manufacture: 2010 Manufacturer price: €27,909.06 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), Binder KB-115 Cooling Incubator Heating Oven External dimensions: L 83.5 cm x W 68 cm x H 85 cm Internal dimensions: L 60 cm x W 40 cm x H 46 cm Temperature range: -10°C to 100°C Rated voltage: 230V You are welcome to arrange a viewing. Hjdpfx Adjynhp Uebsi You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used brochure production system, the ‘C.P. Bourg BBF2005 Perfect Binder’. Item for sale: 1 x Bourg BBF2005 suitable for various Xerox model families: iGen ColorPress Nuvera DocuTech Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Hedsxzqa Uopfx Adbsi For more information, please feel free to contact us personally.

Condition: used, This listing is for the Binder BF115 Incubator The unit is in full working condition and is ready for immediate use BINDER BF 115 – e Series Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Hedoxhfz Topfx Adboi Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Internal Dimensions 550 × 550 × 380 mm (W×H×D) External Dimensions 710 × 725 × 605 mm (W×H×D) Power Supply 230 V, 0.4 kW, 6.3 A fuse (also available in 120 V) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Energy Consumption ~60 Wh/h @ 37 °C; ~235 Wh/h @ 100 °C Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Hedexhfz Hopfx Adbji Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for the Binder KT53 Incubator The unit is in full working condition and is ready for immediate release The Binder KT 53 is a compact, energy-efficient cooling incubator engineered for precise temperature control in laboratory environments. It leverages Peltier thermoelectric technology for eco-friendly, low-vibration cooling—ideal for sensitive biological or chemical samples. Key Specifications Temperature Range: 4 °C to 100 °C Hodpoxv Ay Nofx Adboi Capacity: 53 litres Cooling Technology: Electric cooling via Peltier module Heating Technology: e™ preheating chamber Temperature Fluctuation: ±0.1 °C at 37 °C Air Circulation: Adjustable fan speed Controller: Supports time-segment and real-time programming Display: LCD monitor Data Interface: USB and Ethernet ports for data logging and remote access Safety Features: Class 3.1 independent temperature safety device (DIN 12880) with visual and audible alarms Construction: Stainless steel interior with a tempered safety glass outer door Shelving: Comes with 2 stainless steel racks; supports up to 5 Internal Dimensions (H x W x D): 400 x 400 x 334 mm External Dimensions (H x W x D): 630 x 660 x 630 mm Weight: 65 kg Power Consumption: Approx. 75 Wh/h at 37 °C Advantages of Peltier Technology Silent, vibration-free operation Environmentally sustainable (no refrigerants) Compact and energy-efficient Ideal for sensitive sample environments

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Hedpfxsxhntlo Adboi

Condition: good (used), Magnetic brake, spring-loaded brake, single-disc brake, spring-loaded single-disc brake, magnetic brake Hjdpswzhxdefx Adbsi -Manufacturer: Binder, spring-loaded brake -Type: 76-145 13 E 1 3 -Voltage: 24 V -Braking force: 32 Nm -Mounting: with shaft adapter Ø 20 mm -Number: 3x brake available -Price: per piece -Dimensions: 185/140/H85 mm -Weight: 4.5 kg/pcs