Used Dispenser for sale (562)

Condition: used, Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -Hand: operated Cedpsdl E Icsfx Ap Dohd -with: return to the tank -Number: 2x pumps available -Price: per piece -Dimensions: 580/590/H1005 mm -Weight: 70 kg/piece

Condition: good (used), Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: by hand -2x: separate containers with pumps -with return flow: into the tank -Dimensions: 800/530/H1100 mm Chodpfjdl Smnsx Ap Ded -Weight: 88 kg/piece

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in cleaning unit on hot-dip galvanized and painted high-quality steel frame with forklift attachments, suitable for installation in service vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min. at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min. at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min. at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min. at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 650 x 1,000 x 1,030 mm Empty weight without water tank: approx. 250 kg Dimensions and empty weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm and approx. 280 kg Dimensions and empty weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm and approx. 300 kg HIGH-PRESSURE PUMP:  Manufacturer: COMET  Model: TW 13022S Premium ENGINE:  Manufacturer: Honda  Model: GX 690  Fuel: Gasoline  Cooling: Air  Cylinders: 2  Displacement: 688 cm³  Max. Power: 24 hp (17.7 kW)  Max. Engine Speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL:  Ignition key  Operating hour counter  Electronic fuel gauge  LED indicator for low lubricating oil pressure  Emergency stop button INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shutdown function. SAFETY AND PRESSURE RELIEF VALVES:  The unit is equipped with a safety valve, a pressure relief valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 60 m ½“ high-pressure hose  Hose: 50 m ½“ high-pressure hose (Included) LOW-PRESSURE WATER FEED HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (Included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration rating: 50 Mesh INCLUDED IN DELIVERY:  Multifunctional radio remote control IMET; - Engine on / off; - Bypass on / off; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  300, 400 or 500 l water tank made of polyethylene; OPTIONAL (UPON REQUEST):  60 m ½“ high-pressure hose;  Pulsation/booster pump;  2nd high-pressure hose reel  Electric high-pressure hose reel (connection to the vehicle battery required) ACCESSORIES (UPON REQUEST):  STORZ kit for connection to the water hydrant;  UNI 45 kit; Chsdpfx Ajdqmttop Dsd  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat spray nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispensing kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories upon request

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company in accordance with the Water Resources Act Dear Sir or Madam, We offer a 13,000-liter double-walled storage tank for diesel fuel storage as follows: Nominal capacity: 13 cubic meters Quantity: 1 Used, but fully refurbished. This means the container has been cleaned, reconditioned, primed, and painted. Color: RAL paint (you can also specify your own color). Material: Steel, grade S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate, quantity: 1 Dipstick, quantity: 1 Vent pipe, quantity: 1 Filling pipe, quantity: 1 New level sensor, quantity: 1 New leak detection unit with leak detection fluid, quantity: 1 Ladder, quantity: 1 Suction line, quantity: 1 Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 6,800 mm plus 500 mm for the diesel pump Chjdpfx Aecmclgsp Dod Diameter approx. 1,600 mm Weight approx. 2,800 kg Storage: Above-ground Compact diesel dispensing unit AF 3000 (new), hose length 4 meters. Longer hoses are available on request. Approved automatic dispensing nozzle. Pump: 230 volts, max. 65 liters/min. Excellent offer! Liquid fertilizer/AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also customize your tank system! All our systems are thoroughly inspected and tested by selected employees at our company. We also offer cost-effective delivery on request. Inspection of our systems is possible at any time. We have a range of other tank systems for above-ground and underground storage in all sizes, which are available for sale on our premises. Have we convinced you of our offer? Price/Shipping The price for the fuel station is ex works Warstein, unloaded. Delivery can be offered at a cost-effective price. Delivery time: from January 2023 You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as a certified specialist company in accordance with the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Year of construction: 1999, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage, complete with a new diesel pump including data recording. Codpfjcmcnvjx Ap Djhd Nominal capacity: 10 cubic meters Quantity: 1 Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted. Color: Paint RAL; however, you can specify your own color preferences at any time. Material: Steel in steel, material S235JRG2 Documentation: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent Quantity: 1 fill port Quantity: 1 new limit switch Quantity: 1 new leak indicator with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 5,370 mm plus pump 500 mm Diameter approx. 1,600 mm Weight approx. 2,200 kg Storage: Above ground HDMeco 80 Diesel pump with tank data recording for 100 users Delivery rate: max. 77 l/min PC software: Windows, also Windows 7, USB interface incl. USB stick 4 m dispensing hose (optional extension available), automatic dispensing nozzle with type approval, electrical connection 230 V Required accessories included in the price of the system: HDMe-RS = 2 m return hose with connections (pump pressure relief) EH-115 = 1 1/4" lift check valve with pressure relief, incl. connections Corrugated pipe set: 1 1/4" consisting of: 240 mm corrugated pipe with cathodic protection, incl. seals and flange connection Optional accessories: Transponder tag for contactless user identification Nationwide training on the tank automation system and the software Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. On request, we offer an affordable delivery service. You can inspect our systems at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Currently on offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Water tank, fire water tank on offer. Price/Shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at an additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we buy existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: used, Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm Cedpfxogmuz Uo Ap Dehd -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Condition: refurbished (used), Year of construction: 2018, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, feed rate X-axis: 20 m/min, actuation type: electric, total length: 6,200 mm, overall weight: 3,100 kg, Tornado+ – Fully Refurbished / AS NEW Spray devices GS, RS optional, texture finishing possible Joining, gluing, edge banding, flush trimming, radius milling, corner copying AKF, scraper blade R1/R2 with foil function on unit 1 Belt overlay / Synchro-Flex PUR gluing included in the basic equipment Workpiece dimensions: Width, minimum: 70 mm Height, minimum: 8 mm Height, maximum: 60 mm Codpfx Apszkk Drj Dshd Length, minimum: 150 mm Panel thickness: Max. 60 mm Edge thickness: 0.3 – 15 mm -CM – CombiMelt gluing system Modular design for easy replacement of the pre-melting tanks. Suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Any type of adhesive can be processed with all working parameters (such as dispensing quantity, pre-melting and working temperatures) via individual work programs. -Individual inverters with full flexibility for individual activation of the individual processing motors via a power bus system. Special feature: Machine with speed package! 20 m/min with corner copying!! Tools and chain plates – NEW Sale of the machine with warranty possible. Inspection and demonstration possible at any time by appointment.

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Cjdszpgriepfx Ap Dshd

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Cjdpezqu Dcsfx Ap Dohd Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L210-2 2000 Robot, serial number 912406, industrial robot including control cabinet 60498. The KUKA KR 240 L210-2 robot is a 6-axis robot arm with a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications for the KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, polishing, material handling, palletizing, and remote TCP. Specifications: Manufacturer: KUKA Model: KR 240 L210-2 2000 Type: Robot arm Axes: 6 Payload: 210 kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Serial number: 912406 Control cabinet: 60498 Year of manufacture: 06/2008 Chsdpfx Aozmqzpep Dsd Used – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Forwarding costs upon request – please specify delivery address.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. Csdpfx Apsztq Ezs Dohd The machine is in very good condition and can be inspected (disassembled). Max. 1100 mm, min. 126 mm.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS SUPER HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98/155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Codozxrilspfx Ap Dohd Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Year of construction: 2025, condition: new, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! Ulma TSA 680 S Automatically operating machine for sealing pre-formed trays made of various materials (polypropylene, polyethylene, PVC, polystyrene, PET, CPET, etc.) using heat-sealable films. These films are compatible with the trays and create packaging with or without a protective atmosphere – depending on customer requirements. Technical Specifications Model: TSA 680 S Condition: Exhibition machine Year of manufacture: 2025 Performance: Up to 54 packages/minute (depending on film and product characteristics) with MAP. Packaging type: Tray sealer Machine Equipment Length of infeed conveyor: Free infeed section 3000 mm Equipment Features ✅ 3-meter belt infeed ✅ RFID access cards ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ MAP Cut Inside tool for trays 227 x 175 or 190 x 144 ❌ Double film roll holder ✅ Vacuum / Gas system (O2 >21% possible) ✅ Vacuum pump Busch 300 m3/h ✅ Menu separator for liquids ✅ Spare parts packages for machine & tool included ✅ Tool changing cart ✅ Central lubrication for lifting system ✅ Synchronization signals for upstream and downstream equipment Documentation & Operation Language (Documentation & HMI): German (other languages available on request) Cedjzmdrhjpfx Ap Dehd Dimensions & Weight External dimensions (L × W × H): 6,020 × 2,070 × 1,110 mm Shipping weight: 2600 kg (including transport packaging)

Condition: used, maximum load weight: 200 kg, overall weight: 2,200 kg, axle configuration: 1 axle, first registration: 04/2004, total width: 2,500 mm, total height: 2,750 mm, Year of construction: 2004, Selling CTR dispensing trailer * 2 flow coolers Chodpszig Spefx Ap Ded * 4 beer taps * Lighting newly installed * Car coupling * New TÜV (technical inspection) upon purchase * Sale according to § 25A. No VAT. * Errors and prior sale excepted.

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4M Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400 V ~ 3-phase Codpfx Aoz E N Enjp Dohd Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow cleaning fluid to be dispensed directly through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.

Year of construction: 2009, condition: used, Palletiser Solema Cartesio Chsdpfevc Ucgsx Ap Dod Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system

Condition: ready for operation (used), functionality: fully functional, The Tecno Fluss VM 5000, manufactured in 2003 and identified by serial number 913, is an ideal solution for automating the dispensing of liquid or semi-solid products. This versatile model facilitates the precise dosing of various creams, sauces, and pastes. Furthermore, its ergonomic design reduces manual intervention, thereby increasing production rates. Furthermore, the intuitive operation of the Tecno Fluss VM 5000 allows operators to easily adjust parameters, ensuring a consistent flow. Each portion remains uniform, even at high production rates. Furthermore, the use of stainless steel components enhances its robustness and simplifies maintenance. As a result, this machine helps reduce the risk of contamination while extending its lifespan. Furthermore, the robustness of this dispenser meets the rigorous standards of the food industry. In addition, its compact design facilitates its integration, whether in a confined space or within a complete production line. In short, the Tecno Fluss VM 5000 represents a strategic investment to improve dosing accuracy, increase productivity, and reduce operational costs. This ensures consistent quality and significant time savings in your manufacturing processes. Technical specifications: Adjustable production speed to accommodate high throughput Stainless steel construction to maintain optimal hygiene Intuitive control for simplified use Dosing system suitable for liquid and semi-solid products Estimated power: approximately 3 kW depending on configuration Cjdpowdv Ryefx Ap Dohd OWYSnISl

Condition: new, Year of construction: 2026, Semi-automatic piston fillers, 50 ml - 1,300 ml Stainless steel cylinder Tabletop unit Pneumatically/volumetrically controlled dispensing unit Special 3-way valve for viscous or chunky products Up to 600 units/hour, depending on product, fill volume, and operator Fill volumes: Chsdpfx Aoib A Ipsp Ded 0 - 38 ml, 2 - 100 ml, 20 - 680 ml, 50 - 1,300 ml

Condition: new, Year of construction: 2025, Edge banding machine F5 with PLC control (including 15" touchscreen), hot melt adhesive application to the workpiece for edge banding material up to 3 mm: Joint milling cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with interchangeable pot preparation, including adhesive dispensing device, HF milling station with pneumatic milling adjustment, including corner rounding milling cutter, radius trimming knife, edge trimming knife (including pneumatic extraction device), finishing station Joint head Whispercut Combination milling head Radius milling cutter R=2mm Radius corner milling cutter R=2mm Quick-change preparation for corner milling cutter Radius change motor R=1mm Multi-radius trimming knife R1/R2 Chassis Spray device for release agent (PUR) Spray device for cleaning agent (PUR) Chedpfeh Hl Aysx Ap Djd pneumatic 3-point adjustment LED lighting INCLUDING 2nd interchangeable glue pot max. edge thickness 3mm Workpiece thickness 8-50mm min. workpiece length approx. 160mm Feed speed 10m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300x1300x1400mm LxWxH Weight approx. 900kg Extraction port 1 x 140mm

Condition: new, functionality: fully functional, mileage: 20 km, power: 123 kW (167.23 HP), first registration: 05/2026, fuel type: diesel, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, overall weight: 3,500 kg, tire size: 225/65r16, wheelbase: 4,215 mm, next inspection (TÜV): 05/2028, fuel: diesel, fuel tank capacity: 80 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 25 m³, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, immobilizer system, lane keeping assist, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, second-hand vehicle warranty, soot filter, spoiler, start-stop system, summer tires, tire pressure monitoring, traction control, truck registration, EU-compliant vehicle with warranty. Box van Cargo area length: 4500 mm Cargo area width: 2200 mm Cargo area height: 2300 mm Number of Euro pallet spaces: 10 Wheelbase: 4215 mm Sliding tarpaulin, left side Payload: approx. 1000 kg Cab heater Cruise control Air conditioning On-board computer 105-liter fuel tank Wooden floor Electric windows Central locking with remote control Turn signals in exterior mirrors Extended exterior mirrors Chedpfx Apsiuxcwe Dod Reinforced suspension Water tank with soap dispenser Toolbox Spare wheel - Available in approximately 2-3 weeks. - Delivery, leasing, or financing options available. - Contact: Auto-Wardenga Irenäus Wardenga, also available on WhatsApp.

Condition: new, Stainless steel filling container, tank, canister Article number: 10261 Safety filling container made of stainless steel, FM-approved, 19 liters volume - for safe dispensing of liquids - safety container made of stainless steel - flame arrestor screen in the filling opening - self-closing lid and overpressure valve - FM-approved Csdpfx Apjd Dwtuo Djhd - equipped with a self-closing tap 3/4" Application: Dispensing Length (external) (mm): 410 Width (external) (mm): 280 Height (external) (mm): 400 Diameter (external) (mm): 280 Weight (kg): 4.09 Volume (l): 19

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups Chodpfxeugpwnj Ap Djd No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: like new (used), Year of construction: 2019, GIC TAGINNOV SPEED ETIQ Year of Manufacture: 2019 _____ Product Description: A GIC RFID processing machine where the RFID is dispensed under the label where you want it. Machine Specifications and Equipment:  Speed: 3 to 50 m/min.  Weight: 70 to 16gr  Label Width: 350mm Maximum  RFID: wet  RFID width : 100mm maximum Chjdpfxev Iqg So Ap Dod _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: used, Year of construction: 2019, Manufacturer : Novexx Solutions Model TE 204 Chedpoygndiefx Ap Ded Year : 2019 Type : Tamper-evident labeller Type of products handled : Carton   Labelling head : ALS204 Dispensing speed : max. 40 m/min Label width: 10 -110 mm Label length: 5 to 600 mm   Supply voltage: 220V Motor power: 2.5 kW Technical documentation Dimensions : 2363 x 1455 x 1420 mm  

Condition: used, Hebrock K34 Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Trimming unit Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition From a carpentry business closure/retirement Available from carpentry Codpfswtfvkex Ap Dehd