Used Bottle Washer for sale (2,469)

Condition: used, Year of construction: 2010, Overview  This bottle washer was manufactured in 2010 by German company KRONES AG. The LAVATEC 358 was operated on 330 ml bottles, achieving a maximum speed of 66,000 bph with a nominal speed of 43,000 bph. The machine is stopped since September 2025, still installed with energy disconnected, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: Max. 66,000 bph Nominal 43,000 bph Formats: 330 ml Application: Bottle washing Operating hours: 48,121 h Hsdpfjyi Aywsx Adboi

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Hedpfxjtrbrqs Adbei

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel Hjdpfx Adovl Huaobji

Condition: used, Year of construction: 1983, Overview  This bottle washing machine was manufactured in 1983 by Italian company Silmo (model Praktika). The machine was part of a filling line with an overall output of 2,500 bph and is available immediately. Technical data  Capacity: 1,000–2,800 bph at 30-second cycle 1,900–5,600 bph at 15-second cycle (Was operated in a line running 2,500 bph) Formats: Prepared for 0.33 L Longneck Bottle rows: 12 bottles per row Special features: Label removal   Hodpsyb Sxtsfx Adbji

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consumption: 3.25 – 3.38 m³/h at 60°C Power connection: 12.0 – 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Width of frame: 1725 mm Height: 2300 mm Hjdpfx Aoxn A S Nodbei

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Hodpfx Adjvrfivsbji

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with standard bottle formats Hodpfxjyb Sxaj Adbei

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Hedpfx Aewg E D Ijdbei

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Hodpfx Adou H R Nnebji

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Hsdpfxetxd A Ss Adbei

Condition: used, Year of construction: 1999, Overview  This bottle washer was manufactured in 1999 by Italian company BODINI (model 201-10/66-11V). The machine is used for lemonade and syrup applications and has been maintained every 6 months by the owner. It remains in production until February 2026, where it can also be visited. After production stop, it will become available for removal. Technical data  Capacity: 4,500 bph Formats: 1 L 75 cl 33 cl Dimensions: 6.7 m × 2.2 m 0.5 m conveyor ≈ 2 m height Heating system: Electric heating system, 165 kW Power consumption: 160 kW with electric resistance 10 kW otherwise Air supply: 5 bar Hodpfx Ajyb Titedboi

Condition: used, Year of construction: 2011, Overview  The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled.  Technical details  Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge  Rotary spraying  Continuous machine  Stainless steel body  Documentation  Software backup  Stainless steel pumps  Conductivity measurement  Finger task  Spare parts Bottle cell tips Bottle cell supports Hjdpfx Aou Rindedboi

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Hodpfx Ajl Hx Adjdbji

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Hsdpfet Ul Exox Adboi

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Hsdpfel Hx Ensx Adboi

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Hjdpfx Adexqmrfebei Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: used, Year of construction: 2012, Technical Summary and Application Scope – ATES Giorgia 8000 bph The ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections. Main Technical Data Hsdpfxsxqmqzo Adbsi Type: Industrial glass bottle washer and rinser, suitable for recycled and new bottles. Nominal output capacity: up to 8,000 bottles/hour depending on bottle format, contamination level, and line configuration. Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows. Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance. Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing. Installed electrical power: approx. 20 kW. Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley). Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar. Drainage: integrated rinse and tank drainage via 2″ pipeline. Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection. Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage. Filtration: internal filtration plus 0.2 μm microfiltration for process water. Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency. System Architecture and Process Flow Returnable bottle cycle (full washing and rinsing) Automatic loading into baskets via push bars. Pre-wash spray to remove dirt and label residues. Immersion in hot caustic bath to disintegrate adhesives and organic matter. High-pressure internal and external washing through jetting manifolds. Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water. Continuous label and debris extraction with filtration to prevent clogging. New bottle cycle (rinsing only) Spray pre-wash. Pre-treatment with detergent solution. Internal and external washing as required. Multi-stage rinsing and transfer to filling or storage. Immersion and label management stage Pre-wash and wash for removal of labels and residues. Sequential immersion and spray jets with controlled dosing and temperature.

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg Hsdpfx Adorxuv Ajboi

Condition: used, Year of construction: 2002, Bottle washer, make Krones, type: Lavatec KESK 245/17-120, control range 4.000 - 11.000 bph, for bottles with max diam. 105mm, built 2002, single-end machine, 180 rows of 17 bottle pockets, removed label outfeed in bin, with pre-soak bath water + caustic, 1+2 caustic jetting, 1+2+3 water jetting hot+cold+fresh, for sale. Hsdpfx Adorxup Sjboi

Condition: used, Year of construction: 2000, Used Bottle Washer Dryer Cames WDT8  Introduction Firstly, the Cames WDT8 is a highly effective and reliable solution for the bottling industry. Specifically, this advanced washing and drying system is designed to ensure optimal bottle treatment, combining cutting-edge technology with precision engineering. Moreover, the machine is encased in stainless steel, offering robustness and longevity, coupled with safety features to ensure secure operation. Technical Features of Washing Secondly, the Cames WDT8 is equipped with an 8-head brush carousel for washing. This system effectively treats bottles, ensuring deep and uniform cleaning. Importantly, the carousel’s primitive diameter is 480 mm with a pitch of 188.4 mm, demonstrating its efficiency in handling various bottle sizes. Hodjvgt Ucepfx Adbsi Drying and Energy Efficiency Additionally, a distinctive element of the Cames WDT8 is its two-way drying tunnel, complete with blades and blowers, and a heated blowing bar with resistances at the top. This configuration ensures quick and effective drying, reducing processing time and increasing productivity. Notably, with a total power of 15.25 Kw and water consumption between 120 and 220 l/h, the system shows high energy efficiency. Production Capacity and Versatility Furthermore, the production capacity of this Bottle Washer Dryer ranges from a minimum of 2,750 bottles per hour to a maximum of 5,500 bottles per hour, offering great versatility for different production needs. The machine can handle a cylindrical bottle format, with the bottle entry positioned on the left, facilitating integration into the existing workflow. Conclusions of the used washer dryer Cames WDT8 In conclusion, the Bottle Washer Dryer Cames WDT8 is an excellent choice for those seeking a used bottle washing and drying system that combines high efficiency, versatility, and safety. Its robust design and advanced technical features make it a wise investment for any company in the bottling industry.

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 250, 500, 1000 ml PET/Plastic bottles with the cap D- 38 mm Hedpeyiptqjfx Adboi Made by SELO, Netherlands. Consisting of: 1. 2x Accumulation Tables 150 cm diameter Motorised 2. Rotary Bottle Washer 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller 6. Associated conveyors AS NEW CONDITION

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. Hedpfjxp Urdox Adboi The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: new, Year of construction: 2026, functionality: fully functional, power: 2 kW (2.72 HP), *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Hsdpfsyk Rurox Adboi • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Overall dimensions: 1720 x 1100 x 1600 mm Tank size: 1200 x 600 x 1400 mm Weight: 248 Kg Hjdpfxoi Arlhs Adboi Material: Acid resistant It is equipped with a connection suitable for filling and draining (ball valve), and a pneumatic (electric) valve serves to aerate the tank.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible Hodpsfz Dvvsfx Adboi The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.