Bobst Domino 110 FKM

BOBST Domino 110 M

Condition: good (used), Year of construction: 1996, GALLUS Arsoma EM 280-8 Colour Flexo Printing Press Model: EM280 Year of manufacture: 1996 Configuration: • 8 flexo printing units • 8 hot air dryers • GEW UV curing system (1x) • Turn bar (web turning device) • Sheet delivery (stream delivery) • BST Powerscope 4000 web inspection system Technical Data (approx.): Dodpfx Asy A Nhiodhecn • Max. web width: 280 mm • Print width: approx. 260–270 mm • Repeat length: approx. 250 – 520 mm • Unwinder: max. roll diameter approx. 800–1000 mm • Rewinder: max. roll diameter approx. 800–1000 mm • Mechanical speed: up to approx. 120 m/min • Substrate range: self-adhesive labels, paper, film and flexible packaging materials The machine offers a robust and proven solution for label production, providing high flexibility due to the combination of conventional drying and UV curing systems. This enables the processing of a wide range of materials and applications. A key advantage of this press is the included tooling package, which significantly reduces the need for additional investment and allows for immediate production start-up. Scope of delivery includes: • Printing cylinders • Anilox rollers • Magnetic cylinders This added value ensures high versatility and cost-efficiency for future production needs.

Condition: good (used), Year of construction: 2006, web width: 330 mm Corona 8-color UV Cold In Production etc. Dodpfx Adsxzr Dzjhecn

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes Dedpfx Ajzlqzgedhjcn - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Year of construction: 1981, condition: excellent (used), We offer this machine in very good condition: Bobst SP 102E Autoplaten, manufactured in 1981. Manufacturer: Bobst/Switzerland Model: SP 102E Autoplaten Year of Manufacture: 1981 Condition: Very good equipped with a stripping section, still in production, available from August 2026 The machine is still in production. Test runs are available. It is the main die-cutting machine in our print shop and is equipped with a stripping section. Dcodpfx Ajy H Dl Djdhen Available from August 2026. No intermediaries – directly from a Polish printing house!!! Price: 50,000 EUR EXW Negotiable.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 70 The Minipack Tunnel 50 is a well-insulated and quiet two-chamber shrink tunnel designed for wider and taller products. – Shrink tunnel for various packaging requirements – Suitable for different types of shrink films – Power supply: 400 V, 50/60 Hz, 3-phase – Installed power: up to 14.5 kW – Max. product dimensions: 680 × 390 mm (variable length) – Tunnel entry: 690 × 390 mm (W x H) – Machine dimensions: 2770 × 1160 × 1640 mm (L x W x H) Dcodpfx Adoyaqihjhjn – Machine weight (net/gross): 415 / 483 kg

Year of construction: 2008, condition: used, Year: 2008 Condition: Functional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Dedpsy H Hgdjfx Adhscn Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Condition: ready for operation (used), Max sheet size 485 x 660 mm (19.1" x 26.0"). Max printing size 475 x 650 mm. Max speed till 10,000 Dcsdpeyx Itpjfx Adhon Two color NP device with a lot of numbering devices full documentation

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 3,200 mm, stack height: 1,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 3,200 mm, Equipment: safety light barrier, ESKO - Kongsberg C64 with very low hours fully atomated - pallet to pallet board feeder - I-BF 60M board stacker - I-MS 60 M i-camera kit, underside cammera conveyer (new matt for buyer installation - currently with origynal one) almost all optional tools: Hi power milling unit (HPMU-C) Dcsdjxy Nznjpfx Adhon Dual HDU-C package (crease wheels - small+big, perforation, V-cut) Variangle kit VibraCut-C tool Corruspeed Knife (for cardboards) Hi-Force knife - Cpackage inc.blade adapter RM knife tool - C package Multizone pannel TB - Industrial stationary Vacum cleaner sound insulating

Condition: excellent (used), Year of construction: 1999, KBA COMET Year: 1999 Newspaper page (broadsheet): 420 × 578 mm Magazine page (tabloid): 289 × 420 mm Newspaper page layout format: 395 × 553 mm Max speed: 30,000 cylinder rev./h Cut-off length: 578 mm Cylinder circumference: 1,156 mm Paper web width (standard): 840 mm / 420 mm Maximum web width: 840 mm Minimum web width: 685 mm Paper web speed: 9.63 m/s 6 printing units Output: 64 pages per cycle technotrans ink tank conveyors stacker Gammerler KL513/1 Dcedpfx Adsyq N Ecshen 4x Amal AR60

Condition: used, Year of construction: 2007, The machine has undergone extensive modernization, including: Dsdpfx Aszrugtjdhjcn • Regi-Star 20 register control upgrade • IPQ Check Pro 100% print inspection system HELIOSTAR S DRIVE RETROFIT The original gravure cylinder drive system has been upgraded to the latest Heliostar S configuration, including: • New gravure cylinder drive motors • Upgraded inking roller drive system • New cylinder chucks with adapters • Chuck drive supports • Chuck sensor system • New gravure cylinder bearings • Upgraded sidelay register components • New sidelay register drive units • New sidelay register safety guards • Mechanical retrofit and mounting components • Electrical accessories and complete technical documentation FEATURES • Excellent mechanical condition • Outstanding cosmetic condition • Fully operational and production ready • Extensive modernization program • High-performance automatic turret unwind and rewind • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • BST 100% web inspection • Suitable for high-quality flexible packaging production TECHNICAL SPECIFICATIONS Specification Details Printing Process Rotogravure Number of Colours 8 Web Width 1,020 mm Maximum Print Width 1,000 mm Print Repeat Range 450 – 1,050 mm Unwind Diameter 1,000 mm Unwind System Turret flying splice with reel lift Drying System Gas heated Corona Treater Yes Ink Viscosity Control Yes Edge Guide System Yes Inspection System BST Rewind Diameter 1,000 mm Rewind System Turret flying splice with reel lift (76 mm & 152 mm cores) Machine Features • 8-colour high-performance rotogravure printing press • Automatic turret unwind and rewind with flying splice • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • Web edge guiding system • BST web inspection system • Suitable for high-quality flexible packaging and converting applications • Robust W&H engineering for reliable, high-speed production Applications Ideal for printing: • Flexible packaging • Food packaging • Industrial packaging • Laminating films • Printed plastic films • High-quality packaging materials