Used Discharge for sale (2,431)

Condition: used, Year of construction: 2009, Manufacturer: Romaco - Frymakoruma Model: Dinex Lab Year: 2009 Type: Vacuum mixer for R&D or small-scale production Application: liquid and/or viscous (semi-liquid) products = dispersion, homogenization, emulsion, grinding, and pumping of the product Tank: Pressure: -1 / 0 bar Volume: 18 L Temperature: 130°C Jacket: Pressure: 6 bar Volume: 2 L Temperature: 180°C Homogenizer: high-speed agitation 2 modes = Pumping with discharge / Dispersion with high shear force Tool size: 100 mm Rotor: 20 x 4 mm Stator: 30 x 4 mm VEM motor 7.5 kW / 2890 RPM Scraper mixer: slow agitation SEW 0.37 KW motor Sterling SIHI LEMA 25 liquid ring vacuum pump Ksdpfx Asx R D Elog Ujll Power 1.1 KW - Max. 16 m³/h. CIP (clean in place) 2 x feed hoppers, 1 of which is connected to the jacket with its piping Air pressure: 6 bar Water pressure: 6 bar Temperature control regulator Single-acting seal: reconditioned by Burgmann Paper documentation Weight: 750 kg

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Kodpsx R D Efjfx Ag Uell Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Manufacturer : Halvor Forberg A/S Model: F-1000 Type : Paddle mixer Nominal volume : 1000 L Min volume : 400 L Max volume : 1400 L Total discharge : pneumatic Kledpfox R Db Hsx Ag Uol Power : 15 kW Weight : 3000 kg

Condition: used, Year of construction: 1997, Manufacturer : Aeromatic TK Fielder (GEA) Model: Pharma Matrix 150 Year : 1997   Type : Granulator / high speed mixer Application : Granulation Sector : Pharmaceutical / Chemical / Cosmetics   Material : stainless steel Tank volume : 150 L Jacket : 2 bars / 80°C max Main agitation : 130 - 260 rpm Power : 11 KW Variable speed drive: electric Chopper / granulation: 1500 / 3000 rpm CIP self-cleaning: seals and tank GMP: Good manufacturing practice : safety / contamination CASTELL safety key Kedsx R Dbmspfx Ag Usll Discharge valve: pneumatic Bag filter Primary sealing: inflatable seal Secondary seal: compressed air purge Compressed air: 6 bars Electrical cabinet Video available in operation Digital documentation

Year of construction: 2021, condition: used, Manufacturer : Thémis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Laser : keyence mdu1000C Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. Kjdpsx R Aqtsfx Ag Usll A Bofa Ad Access vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control computer, ... Documentation, drawings, backup, software available.

Year of construction: 1999, condition: used, GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Punch type: EU D Max. compression force: 100 kN Kjdpex R Amhjfx Ag Usll Max. precompression force: 10 kN Production speed: 15,900 – 79,200 tablets / hour. Ø Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Die height: 23.81 mm Ø Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost. Kledex R Al Djpfx Ag Usl

Year of construction: 2002, condition: used, FRISTAM PUMP FM 252 C STAINLESS STEELMulti-stage centrifugal pump 30 m3/hHMT 70msuction diameter: 65 discharge diameter: 50Year 2002Engine 15 KW – 2900 rpm – 400/690v Kledpfx Aox Rz S Asg Uel IP55Deported terminal block Mechanical seal

Condition: used, // Sold as is or reconditioned // Vacuum paddle dryer mixer Kedpfsx Rz Spox Ag Usll Used for products such as powders/powdery substances. 316 stainless steel Tank diameter 1000 x 2000 Volume: 1100 litres Jacketed 86 litres / 1 bar - 120°C Heated agitator 235 litres / 1 bar - 120°C Agitation by 8 scraping blades Loading via 400 diameter Discharge 350 diameter with guillotine valves ADF 15 kW motor Self-cleaning filter

Year of construction: 1982, condition: used, Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes Kodox Rz R Espfx Ag Uoll A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. TECHNICAL INFORMATION Weight : 1590 kg Coater Dimensions : H 2065 x W 1665 x D1475 Spray Guns : 3 Working Volume : 170 L Compressed Air Consumption (5bar from Coater) : 7.9 Air Volume Range (m3/hr) : 1500 – 2500 Main Heater Temperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Model: HM 10000-9200 Control system: UNILOG B4 Year of manufacture: 2003 Operating hours: 67,092 h Technical data – Clamping unit Clamping force: 10,000 kN Tie bar spacing (h x v): 1120 x 1400 mm Platen size (h x v): 1960 x 1690 mm Minimum mold height: 550 mm Kjdpfox Up Rhsx Ag Uell Maximum mold height: 1,020 mm Maximum daylight: 2,120 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Movable platen centering diameter: 250 mm Fixed platen centering diameter: 315 mm Technical data – Injection unit Screw diameter: 120 mm Shot volume: 5,655 cm³ Injection pressure: 1,632 bar Screw length: 22 L/D Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 Nm Plasticizing rate: 144 g/s PS Free discharge plasticizing rate: 1,144 g/s PS Number of heating zones: 8 Nozzle stroke: 700 mm Dimensions & Weight Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg Equipment Display language: German CompactFlash drive 4x hydraulic core pulls Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler 16x mold heating circuits

Condition: excellent (used), Year of construction: 2004, operating hours: 9,067 h, functionality: fully functional, overall weight: 19,000 kg, power: 315 kW (428.28 HP), Doppstadt AK 430 Profi Shredder/Chipper/Remote/Magnet • Manufacturer: Doppstadt • Model: AK 430 Profi • Year of manufacture: 2004 • Operating hours: 9,067 • Engine: 6-cylinder Mercedes engine • Power: 315 kW / 430 HP • Magnetic drum • Radio remote control • Hydraulic self-propulsion • Hydraulic rear conveyor • Hydraulic support wheels • Loading length: 2.94 m • Loading height: 2.18 m • Discharge height: 2.80 m • Conveyor belt length: 3.80 m • Number of hammers: 36 pcs • Features: Rear discharge belt Kledpfxjx El Dfj Ag Ujl • Discharge belt as new • Road approval with a maximum speed of 80 km/h • Total weight: 19,000 kg • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale in accordance with our general terms and conditions.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: 310is-WA, number of axes: 5, This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Additional equipment • Includes all accessories in the photos • Includes digital documentation Machine Benefits Technical Machine Benefits • Internal dimensions of the work tank: 1100 x 800 mm • Wire diameter: 0. 1 mm to 0. 3 mm (0. 25 mm present on the machine) • Wire spool capacity: up to 16 kg Klsdpfxjyali Ae Ag Uel • Automatic wire cutting and feeding Extra Information Machine still under power

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian pallet stacker Load center: 600 mm Fork width: 180 mm Fork thickness: 60 mm Mast type: telescopic Transmission: electromechanical Condition: new machine Kjdox Tkkajpfx Ag Uell Technical condition: new Front tires type: Vulkollan Rear tires type: Vulkollan Battery voltage: 24V Battery capacity: 65Ah Battery manufacturer: Noblelift Battery year: 2026 Description: 4-wheel concept for stability • Durable metal hood, centrally positioned drawbar • Multi-function display with discharge and error code indicator as well as operating hours counter • Built-in charger offers greater flexibility • Integrated lift cut-off when the battery is discharged extends battery life • 24V/65Ah lithium battery pack • Pin-code lock • Ergonomic and robust tiller arm Pulse control, CE certificate,

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian stacker Load center: 600 mm Fork width: 180 mm Fork thickness: 60 mm Mast type: Telescopic Transmission: Electromechanical Condition: New device Technical condition: New Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 65Ah Battery manufacturer: Noblelift Battery year of manufacture: 2026 Kedpfx Agjx Tki Aj Uell Description: 4-wheel concept for enhanced stability • Robust metal cover, centrally positioned tiller • Multi-function display with discharge and error code indication as well as hour meter • The integrated charger provides greater flexibility • The built-in lift cut-off when the battery is discharged extends battery life • 24V/65Ah lithium battery pack • PIN code lock • Ergonomic and robust tiller Impulse control, CE certificate,

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian pallet stacker Load center: 600 mm Fork width: 180 mm Fork thickness: 60 mm Mast type: Telescopic Drive: Electromechanical Condition: New machine Technical condition: New Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 65Ah Battery manufacturer: Noblelift Battery year of manufacture: 2026 Kedpfox Tkivex Ag Uell Description: 4-wheel concept for stability • Robust metal cover, centrally positioned tiller • Multi-function display with discharge and error code indication as well as operating hours counter • Built-in charger for greater flexibility • The integrated lift lockout on discharged battery extends battery life • 24V/65Ah lithium battery pack • Pin code lock • Ergonomic and robust tiller Pulse control, CE certificate,

Condition: excellent (used), fuel type: diesel, color: yellow, first registration: 01/2018, Year of construction: 2018, Drive: Track Klodpfx Agjuxu Eqo Uol Unladen weight: 30,000 kg Technical condition: very good Visual condition: very good Price: On request CATERPILLAR PM 622 ASPHALT MILLING MACHINE 4 x track drive Working width: 2235 mm Working depth: 0-330 mm 193 milling picks Hydraulically foldable discharge conveyor CAT Grade Control automatic levelling 2 x operator consoles with LC display Hydraulically liftable side plates Rear-view camera Weather protection roof, foldable Driver's seats Work lights Cleaning system CAT Diesel engine, C18 622 HP Original paint FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: ready for operation (used), Year of construction: 2007, number of axes: 5, This 6-axis FANUC M-6iB robot arm was manufactured in 2007, featuring a robust design with a 380-415V power supply, digital servo function, and password protection. It includes a handling tool, basic software, and a CE sign option. Ideal for automation tasks requiring precision and reliability. If you are looking to get high-quality automation capabilities consider the FANUC M-6iB machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Units available: 2 • Standalone controller • Rdi/o: 8/8 • Input power voltage: 380-415v • Comprehensive mechanical and electrical specifications including full covers and support members. Extra Information Controller Standard Setting Handling Tool Digital Servo Function Password Protection Klodpfjyaih Ajx Ag Uol Space Check CE Sign Option Spare Fuse HMI DEVICE (SNPX) INTERNET CONNECTION PC INTERFACE Operation Box (Type C) Standard (DCS) (English/SYMBOL) (3 mode) Axes Control Card: 8 axes (Standard) Regenerative Discharge Resistor D Leakage Breaker 3.0/7.5KVA/380-500V (EMC) E-STOP Unit A Teach Pendant Cable: 10m Power Transformer Type E: 3KVA (380-415VAC, 440-500VAC) Fan Unit for A Cabinet A Door Switch/Standard Operation Box Connection Cable/Type C/4m 5 Slots I/O Base Unit (A cabinet) Hour Meter i Pendant/Dual/General

Condition: good (used), Year of construction: 2003, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT tank container / swap body 31,800L / 1 compartment bottom discharge UN PORTABLE, T7 steam heating insulated Payload: 31,860 kg Design temperature: -40/+130°C = Further Information = General Information Year of manufacture: Sept. 2003 Model year: 2003 Weights Tare weight: 4,140 kg Payload: 31,860 kg Gross weight: 36,000 kg Functional Cargo capacity: 30,850 l Body manufacturer: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Kljdpjut I Dhsfx Ag Usl Condition Technical condition: good Optical condition: good Further information Contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2003, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT Tank Container / Swap Body 31,800L / 1-compartment Bottom Discharge UN Portable, T7 Steam Heating Insulated Payload: 31,860 kg Design Temperature: -40/+130°C 5-Year Valid ADR Inspection: 03/2028 = Further Information = General Information Year of manufacture: Sept. 2003 Model year: 2003 Weights Unladen weight: 4,140 kg Payload: 31,860 kg Gross vehicle weight: 36,000 kg Functional Cargo compartment volume: 30,850 l Kedpfox U A U Tex Ag Uoll Body manufacturer: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: Good Visual condition: Good Further information Please contact Arne Honingh for more information.

Condition: used, Year of construction: 2011, functionality: fully functional, Ludden & Mennekes interchangeable container Specially for paper/cardboard Kedswcdtgepfx Ag Uell Compatible with Ludden & Mennekes KBW stationary press. This container has the opening at the container intake (front). The paper/cardboard is pressed into the container from the front. Because the container is conically constructed in the direction of the discharge door, the material can be emptied very easily. In contrast to 'standard' interchangeable containers, this makes unloading much easier.

Condition: like new (used), Year of construction: 2012, Description of Ficep RAPID HP35T Ficep RAPID HP 35 T Angle Processing Machine The Ficep HP35T is the predecessor of the current Ficep RAPID series for processing angle steel. The Ficep HP35T is a CNC-controlled system for machining angle profiles. These are robust angle processing centers commonly used in steel fabrication and truss construction. The angle steel is positioned on a transport frame for material feeding. A measuring carriage with a gripper automatically conveys the angle material to the various processing stations of the system, following the machining data entered via the CNC control panel. Once machining is complete, the finished component—drilled, marked, and sawn—is transferred to the outfeed roller conveyor and storage system. Kjdpfxsxn T Sme Ag Uoll Transport System Reinforced roller conveyor for profiles up to 12 meters in length. A powered measuring carriage on the infeed table transports the material at up to 45 m/min. A rotating support system with cross-transfer racks in the loading area allows for the input of pre-staged profiles into the waiting position. In the discharge area, a driven roller conveyor transports the finished profiles/angles up to a length of 12 meters. Cross-transfer equipment with 5 supports is used for unloading. Drilling Units with Tool Changer To process large angle profiles up to 350 mm with a wall thickness of 40 mm, this machine is equipped with 2 powerful drilling units (one per flange) featuring a spindle drive of 19 kW and infinitely adjustable spindle speeds from 180 - 3500 rpm. These drilling capabilities are ideal for the use of modern carbide drill tools. The drilling tools are held in HSK-A80 holders, and each drilling unit has a tool changer with 3 tool positions for rapid tool changes. MKT38N Marking Unit A marking unit with 38 marking tools allows for flange marking on angle profiles. Characters sized 16x8 mm are hydraulically embossed, enabling part identification after galvanization. Precision Circular Saw The powerful circular saw is designed for 90° cuts. A vertical clamping system secures the material during fast sawing. Material dimensions range from 60 x 60 x 6 mm to 350 x 350 x 40 mm. The 18 kW saw motor with a 560 mm circular saw blade delivers very high cutting performance. Sawing speed is 80 - 180 m/min. Technical Specifications Ficep HP35T: Angle dimensions min. 60x60x6 mm to 350x350x40 mm Circular saw blade diameter 560 mm Saw motor 18 kW Cutting speed 80 - 180 m/min Max. drill diameter 40 mm Drill spindle drive: 19 kW Spindle speed 180 - 3500 rpm Feed rate 80 - 300 mm/min

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. Kjdpsxhfc Refx Ag Uell The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: used, This listing is for a CAS BioMAT Class 2 Microbiological Safety Cabinet. The unit is in full working condition and is ready for immediate release. Kedpjxxyctofx Ag Uoll The BioMAT 2 combines decades of expertise in containment design to offer a range of Class 2 microbiological safety cabinets that prioritize safety, ease of use, and energy efficiency. It provides protection for operators and products while handling biological agents up to Hazard Group 3. Key Features: - User-Friendly Interface: Equipped with a 10cm x 6cm TFT touchscreen displaying real-time cabinet operations and an animated airflow diagram. Intuitive controls with crystal-clear iconography simplify functionality, while a four-digit password ensures security. - Energy Efficiency: Features energy-efficient EC fan technology and low-loss filters, consuming only 140W under typical operational performance (0.6 m/sec inflow and 0.35 m/sec downflow). The set-back mode reduces energy usage by automatically adjusting settings when the cabinet is unattended. - Safety Mechanisms: Full-width LED lighting provides clear indications of any airflow issues, supported by audible alarms and large red LED alerts for malfunctions. The animated airflow diagram gives instant feedback on cabinet status. - Quiet Operation: Designed with EC fans and noise reduction technology, the typical noise level is just 49dBA for the 1200mm models, ensuring a comfortable work environment. - Sustainability: The BioMAT 2 has achieved CarbonNeutral® product certification, contributing to laboratory carbon reduction goals. Product Specifications: - Construction: - Cabinet: 1.5mm mild steel - Inner Liner: Grade 304 stainless steel - Side Windows: 5mm UV-resistant toughened glass - Front Visor Options: - Fixed 200mm aperture with a night door for fumigation. - Aerosol-tight motorized sliding sash with anti-trap reverse function (BioMAT 2-S2). Exhaust Options: - Standard Exhaust: Single HEPA filter with anti-blowback damper. - Thimble Exhaust: Double HEPA filters for enhanced safety. - Recirculation: Double HEPA filters with options for vertical or horizontal air discharge. - Worktrays: Made from grade 316 stainless steel, available in single or divided sections to meet user needs. - Support Stands: Options include fixed height, manually adjustable, or fully DDA-compliant motorized stands. Applications - The BioMAT 2 is ideally suited for laboratories handling biological agents and provides a flexible design tailored to specific laboratory requirements.

Condition: used, This listing is for the Formonia Formaflow VVAP1/at Vaporiser System The unit is in full working condition and is ready for immediate use Foramaflow VAP1a/T Formalin Vaporizer Overview: Purpose: Safe and easy formalin fumigation for ducted safety cabinets. Design: Can be mounted externally or placed inside the cabinet before sealing. Capacity: 120ml solution capacity. Automation: On-delay timer for delayed start. Automatic cut-off switches off heating once the solution has evaporated. Klodoxhgdcjpfx Ag Uel Power Supply: 230V. Construction: Lightweight (2.5kg). Stainless steel body with powder-coated, chemical-resistant matte black finish. 55mm discharge tube angled upward by 1°. Safety: Designed for fully automated and safe overnight fumigation