Used Discharge for sale (2,688)

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. Bedsz Atdrspfx Aa Iodh With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.

Condition: repair required (used), machine/vehicle number: 515054000261, Year of construction: 2003, load capacity: 1,500 kg, lifting height: 4,320 mm, free lift: 1,330 mm, fuel type: electric, battery voltage: 24 V, fork length: 1,000 mm, empty load weight: 2,221 kg, STILL RX50-15 electric three-wheel forklift for internal material handling, with a load capacity of 1,500 kg, a lifting height of 4,320 mm, and a STILL charger. IMPORTANT: BATTERY DEFECTIVE The 24V traction battery is defective or deeply discharged. The forklift is explicitly offered as requiring repair. Lifting and lowering under power cannot be demonstrated at this time. TECHNICAL DATA Manufacturer: STILL Bsdpfjz Hcrkox Aa Ijdh Model: RX50-15 Year of manufacture: 2003 Serial number: 515054000261 Load capacity: 1,500 kg according to the data plate Lifting height: 4,320 mm Free lift: 1,330 mm Fork length: 1,000 mm Unladen weight according to the data plate: 2,221 kg Drive power: 4.0 kW Battery voltage: 24 V; Battery type: PzS CONDITION AND MAINTENANCE In operation until June 2025, after which the battery failed. According to the latest condition report, the hydraulics and mast have no known functional defects; however, a current functional test is not possible due to the defective battery. Rear tires renewed in 2024; front wheels show signs of use. Oil and brake fluid were changed in 2024, according to the information provided; the driver's seat was replaced in 2021. DELIVERY AND COLLECTION Forklift including STILL charger, 24 V / 120 A. Location: 65618 Selters (Taunus), Germany. Inspection by appointment. On-site assistance is available for moving the forklift to the loading ramp and for loading. The buyer is responsible for organizing the transport. Price: 2,875 EUR net, negotiable, plus statutory VAT. Reference: RQ424391-10

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, AGIE FUTURA V 1PM MONDO 20 STAR Bdsdpjymnrmjfx Aa Ish Year: 2000 Operating hours: approx. 10,000 h Documentation: Complete

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0710, power: 51 kW (69.34 HP), type of input current: three-phase, sieve perforation: 20 mm, input voltage: 380 V, Robust industrial CSB wood shredder, Woody K45 type, manufactured in 2015. Equipped with a hydraulic feed ram, discharge conveyor belt with a head pulley magnet, and discharge auger. Suitable for processing MDF, chipboard, solid wood, pallets, and various wood waste streams. ✅ Heavy-duty industrial design ✅ Hydraulic push ram for consistent feed ✅ Magnet roller for automatic removal of metal contaminants ✅ Complete line with conveyor belt and discharge auger ✅ PLC-controlled operation Bedpfx Aaez Dibaj Ijdh ✅ CE-compliant machine

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2316-01, working width: 600 mm, Type 41 Series 600 WRD Working width 600 mm Ideal machine for deburring and finishing of metal products Bdsdpfx Aajr Nbpbe Ieh Equipped with grinding belt and disc/brush aggregate

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2008 Travel distances: X = 350 mm, Y = 250 mm, Z = 250 mm Max. workpiece size: X = 800 mm, Y = 500 mm, Z = 265 mm Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table - chuck: 230 - 480 mm APG FORM Generator - working current 72 amps Best achievable surface roughness Ra 0.2 µm Includes pneumatic chuck Erowa ITS 50 Includes 4-position electrode changer in magazine Bdjdpfx Asz D Hb Doa Ijh Machine weight (net): 2000 kg Machine dimensions (L x W x H): 1300 x 1850 x 2500 mm The machine has already been cleaned, serviced, and thoroughly tested. We would also be happy to commission the machine for you.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,161 h, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 270 mm, number of axes: 3, This 3-axis Sodick AG40L LN2 was manufactured in 2015. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 270 mm. The machine has been operated for 13,161 hours and is currently connected and available for inspection/testing. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG40L LN2 machine we have for sale. Contact us for further details. Bedpfx Aez Akwisa Iodh • CNC Sinker EDM • Year: 2015 • Made in: Japan • Axes: 3 • Machine connected and available for inspection/testing.

Condition: used, Year of construction: 2017, machine/vehicle number: 472447, LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottles IDENTIFICATION - Manufacturer: LEIBINGER - Model: TRANSVASA 12/6 EK - Year of manufacture: 2017 - Serial/order number: 472447 - Previous application: cider FUNCTION AND OUTPUT - 12 emptying valves - Counter-pressure emptying with long-tube technology - 6 decapping stations - Direction of operation: clockwise - Nominal output: 2,500 bottles/h for 0.75 l bottles - Adjustable range: 560–2,800 bottles/h - Designed for carbonated beverages, e.g. traditionally produced cider - Automatic removal and collection of pierced bottle closures - Integrated through conveyor PRODUCT AND UTILITY DATA - Maximum product temperature: 20 °C - Compressed air: 6 bar; connection R 1/2" - CO₂ product pressure: 8 bar; gas connection R 1/2" - Product outlet: DN 40 Bodpjz Icc Sofx Aa Iedh - Gas discharge: DN 40 - Buffer tank: 100 l nominal volume according to the order confirmation; 108 l according to the rating plate - Product pump: stainless-steel rotary lobe pump, material 316L - Conveyor height: 1,000 mm ± 50 mm ELECTRICAL DATA - Operating voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz - Main drive: max. 0.75 kW MATERIALS AND DESIGN - Product-contact parts mainly made of stainless steel 316Ti and 316L - Main pipework made of stainless steel 316L - Emptying tubes made of stainless steel 304 - Food-grade plastics, e.g. POM and PTFE - Food-grade elastomers, e.g. EPDM - Hygienic tubular frame design without horizontal collection surfaces - Frameless Makrolon safety guarding with interlocked doors and removable covers - CIP connections - Mechanical lifting pistons press the bottles against the emptying valves - Bottle-presence monitoring at the infeed and jam monitoring at the discharge - Central safety clutch - Height-adjustable machine feet - CE-compliant design at the time of delivery ACCESSORIES AND DOCUMENTED BOTTLE FORMATS - SOWEC SO filter, year 2017 - Order confirmation: guide parts for one bottle format included - Lightweight 75 cl cider bottle: height 290 ± 1.8 mm, body diameter 82.8 ± 1.5 mm, 29 mm crown finish, approximate brimful capacity 78.5 cl, approximate glass weight 540 g - Méthode Traditionnelle 75 cl bottle, model 1164/320: height 300 ± 1.8 mm, body diameter 85.9 ± 1.5 mm, 29 mm crown finish, filling capacity 750 ± 10 cm³ at 72 mm, approximate glass weight 775 g, maximum carbonation 5.0 volumes CO₂ The original order confirmation, operating manual and bottle data sheets are available. The completeness and condition of the format parts and accessories currently present must be verified before use.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, total height: 2,580 mm, total width: 3,350 mm, overall weight: 3,200 kg, product length (max.): 1,630 mm, number of axes: 3, This 3-axis AGIE AGIETRON INTEGRAL 2 was manufactured in 2006. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 350 mm in the Z-axis. The machine can accommodate workpieces up to 840 x 670 x 250 mm and has a maximum electrode weight of 100 kg. If you are looking to get high-quality die-sinking capabilities, consider the AGIE AGIETRON INTEGRAL 2 machine we have for sale. Contact us for further details. • Units available: 2 Bsdpoz D Uwajfx Aa Isdh • Workpiece size: 840 x 670 x 250 mm • Weight: 400 kg • Number of electrodes: 28 • Max. electrode weight: 100 kg • Circuit diagram: 625942.8 • Electrical: 3 × 400 V, 50 Hz, 6.1 kVA, 8.8 A

Condition: refurbished (used), Year of construction: 2012, operating hours: 19,376 h, functionality: fully functional, machine/vehicle number: 57755, RÖSLER Vibratory Finishing Machine / Rotary Vibrator – fully functional – newly coated – in very good condition For sale is a high-quality vibratory finishing/rotary vibrating system from the renowned manufacturer RÖSLER. The machine is in very good technical and optical condition, is fully functional, and can, of course, be inspected on-site after prior arrangement. Price: €14,500 net A particular advantage of this machine is the condition of the processing bowl: the machine was newly coated directly by the manufacturer RÖSLER. The coating is therefore in very good condition. The machine has been carefully maintained and overall gives a very well-kept impression. Depending on the abrasive media and process used, the system is suitable for deburring, rounding, smoothing, cleaning, and surface finishing of workpieces. Thanks to its robust industrial design, it is designed for professional use in production, metalworking, and surface treatment. The machine is offered including control cabinet/control system and the components shown in the pictures. The control system, drive, and mechanical components are functioning perfectly. The machine is ready for use and fully functional. Condition & Features: * Manufacturer: RÖSLER Bsdpfez D Sn Nex Aa Iodh * Industrial vibratory finishing/rotary vibrating system * Fully functional * Processing bowl newly coated by the manufacturer RÖSLER * Very good technical condition * Well-maintained overall optical condition * Robust industrial design * Including control cabinet/control system * Separation/screening zone and discharge chute available * The machine is currently secured for transport on a pallet * On-site inspection possible by appointment * Selling price: €14,500 net plus statutory VAT.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Mobile shredding plant LINDNER URRACO 4000DS (semitrailer version) Bdjdpfx Aoz Hw Nqsa Ijh Diesel engine: 350 hp Discharge height of discharge conveyor: > 4.50 m

Condition: used, J-Tec Big Bag Discharge Station Bigbag Discharge stations for big bags with vibrating hopper Height adjustable Bdodpfxoy Nttpj Aa Ieh Max big bag dimensions: 120cm x 120cm x 280cm Overall dimensions: 180cm x 180cm x 345-500cm Material: Steel See our other listings

Condition: excellent (used), functionality: fully functional, Stable Linck roller conveyor with 2 discharge options. Total length: 16.30 m. Roller length: 950 mm. Construction height: 1.55 m. Equipped with 6 ejectors for left/right discharge. Includes impact wall, control flap, and electrical switch cabinet with control system. Suitable for model and sawn material. Bedpsyzr Ntofx Aa Iodh

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Bodpfx Aaeyrqpfs Iodh Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, input voltage: 400 V, overall weight: 400 kg, type of input current: three-phase, total length: 3,000 mm, total width: 1,600 mm, total height: 1,850 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 3 A, Object A240401. Rebuilt stainless steel semi-automatic (hand) packing conveyor with Kwiklok clip closing set. Stainless steel hand packaging conveyor, including 2 bag blowing tables, and Kwiklok bag tensioner type 1082J8 and Kwiklok clip closing machines, type 872 XLS. Machine direction: from Right to Left. Machine information: Total machine length: 3.0 meters Total machine width: 1.6 meters (including bag blowing table) Total machine height: 1.85 meters Bsdpfxez Euk Ao Aa Iodh Machine working height: 0.97 meters Length of input conveyor used: 2.65 meters Length of discharge belt used: 0.3 meters Flight distance: 305 millimeters Machine capacity: 1800 packages per hour. Electrical data: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: Cee-Form 5 pin 16 Amp (round red plug). Compressed air: No. Minimum and maximum product dimensions: Products from 100 to 500 mm long. Products from 80 to 210 mm wide. Products from 40 to 160 mm high. Machine version: Frame and legs (2) made of stainless steel construction, ASI 304. Deck, guides, and flights are stainless steel ASI 304. Bag tensioner machine, Manufacturer Kwiklok, type 1082J8. Clip closing machine, Manufacturer Kwiklok, type 872 XLS (clips Kwiklok type JNRP). At the end of the transporter, there is a roller deck, length 0.3 millimeters. Machine equipped with a safety guard at the beginning of the roller deck. Machine stands on wheels (mobile). Fixed carrier speed. New electrical installation on the packing track. Machine is completely rebuilt. Machine description: Packing track, machine suitable for packaging food and non-food products in foil bags. Machine includes: 2 sets of bag blowing tables. Warranty: 3 months.

Condition: used, Year of construction: 2015, Travel range: X 600 mm Y 400 mm Z 400 mm Including coolant system Bdodpfxez D Egre Aa Ioh Water bath machine

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 700 mm Travel distance Y :450 mm Travel distance Z: 420 mm max. workpiece size X: 910 mm max. workpiece size Y: 660 mm max. workpiece size Z: 400 mm max. workpiece weight: 1200 kg table size X: 650 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +101 generator: 30 Ampere submerged cooling unit CNC wire EDM machine 5 CNC axes: X / Y / Z / U / V Automatic wire threading Dual Water Jet with Annealer Automatic wire break recovery 15" TFT touchscreen Linear glass scales in X / Y Dielectric chiller Automatic temperature control Max. table load: 1,200 kg Max. machining current: 30 A Programmable wire tension: 2–30 N Bedpfoz Aq Dvex Aa Isdh Standard wire spool: 16 kg Machine weight: approx. 6,000 kg

Condition: like new (used), functionality: fully functional, fuel type: diesel, overall weight: 30,000 kg, Year of construction: 2026, Omega SC4815 Scalper The Omega SC4815 is a heavy-duty tracked scalping screen designed for demanding quarrying, recycling and construction applications. Built around a high-energy 16' × 5' twin-deck screen box, the SC4815 combines aggressive screening performance with high throughput, robust construction and excellent on-site mobility. Capable of processing up to 450 tonnes per hour, the SC4815 features a 7 m³ feed hopper, 1,200 mm belt feeder and three product discharge conveyors for oversize, mid-size and fines. Its hydraulically folding conveyors and walkways allow for fast setup and straightforward transport between sites. Bdsdpfx Aajz Dbccs Ioh Powered by a CAT 3.6 engine, the machine uses a fuel-efficient diesel-hydraulic drive system and is mounted on a heavy-duty tracked undercarriage. At approximately 30,000 kg, the SC4815 is engineered to handle tough materials while remaining practical to transport and manoeuvre on site. Key specifications: 16' × 5' twin-deck screen | Up to 450 TPH | 7 m³ hopper | CAT 3.6 engine or Deutz engine Three-way material split | 30,000 kg operating weight. Omega SC4815 — built for high production, efficient screening and demanding working environments.

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 48,000 kg, Year of construction: 2026, The Omega TMC Q250 is a heavy-duty tracked cone crusher engineered for high-capacity secondary and tertiary crushing applications. Designed for demanding quarrying, mining and recycling environments, the Q250 combines a robust cone crushing unit with tracked mobility and an integrated feed and discharge system to deliver dependable production in tough working conditions. Bdedpfxez Dbg Ie Aa Ijh With an operating weight of approximately 48,000 kg, the Q250 is built around a substantial tracked chassis for stability and durability. In its working configuration, the machine measures approximately 17.8 m in overall length, with the detailed GA drawing showing a maximum overall width of approximately 4.8 m and height of approximately 4.76 m. The integrated tracked design allows the Omega TMC Q250 to be moved easily around the quarry or job site, while its large feed arrangement, cone crusher and product conveyor provide a complete mobile crushing solution.

Year of construction: 2019, condition: ready for operation (used), Plate processing center manufactured in 2019. This Behringer MAG EVO 420 is suitable for drilling, tapping, marking, milling, and plasma cutting of flat steel and sheet metal. It features a roller conveyor for sheets up to 4000 x 2000 mm and an automatic turret tool changer with 14 tool positions. If you are looking to get high-quality plate processing capabilities, consider the Behringer MAG EVO 420 machine we have for sale. Contact us for further details. Bdsdpez H Nwgefx Aa Ish - Infeed System: Roller conveyor for flat steel/plates up to 4000 x 2000 mm with zero-position transverse conveyors, NC feed carriage, and retractable clamps- Outfeed System: Outfeed roller conveyor with lowerable discharge table and chute into material collection container for small parts- Drilling Unit Drive Power: 16 kW- Spindle Speed: 160 to 4000 RPM- Tool Changer: Automatic turret tool changer with 14 tool positions- Software Options: Milling, V-scoring marking, and DSTV interface for machining data import- Plasma Cutting Unit: Kjellberg HiFocus 360i (for material thicknesses up to 50 mm)- Exhaust System: Large-dimensioned filter unit of older year of manufacture with available piping- Control & PC: Modern CNC control enabling remote maintenance by Vernet Behringer service department, machine computer including software, and office software license- Sheet Dimensions: Min. 1500 x 300 mm (750 x 400 mm with restriction), Max. 4000 x 2000 mm- Min. Finished Part Dimensions: 80 x 80 mm- Sheet Weight: Max. 2000 kg and 650 kg/m- Drilling Diameter: 5 to 40 mm- V-Scoring Marking Depth/Diameter: 5 to 40 mm- Plasma Cutting Thickness: 5 to 50 mm- Number of Carriages: 2 clamps - feed carriage, laterally placed- Number of Clamps: 4 clamps (2 + 2)- Transverse Conveyors: 3 short-stroke transverse conveyors to align sheets against clamps after loading- Working Height: 1000 mm

Condition: good (used), Year of construction: 2015, Elro DBKGN33-EDS90 Bratt pan Bdsdpfx Ajz Dxn Nea Ish 2015, multifunctional pressure pan, stainless bratt pan, 164L capacity, tilting to discharge, adjustable controls, 3ph

Condition: used, Year of construction: 1991, table length 780 mm table width 500 mm ampere 60 / 120 A Control Heidenhain total power requirement 14,0 KVA weight of the machine ca. 4,0 t Bedpfx Aaezwg Rno Isdh dimensions of the machine ca. 3,0 x 2,0 x 2,1 m Sinker EDM machine Control: Heidenhain / Erocom Table: 780 x 500 mm

Condition: used, FAS discharge flap belt conveyor GF 1380-800-600 RA2419 Technical data: Conveyor length (NL): 1380 mm (800 mm conveyor belt + 580 mm flap) Frame width (NB): 800 mm Belt width (GuB): 600 mm Construction height (BH): 435 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.25 lifting and 0.37 conveyor belt Side guide distance: 655 mm Maximum recommended package size: 600 x 450 mm Bedpfx Aajw H Ehys Ijdh Optionally available: Supports to increase the delivery height Frequency converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2005, number of axes: 4, This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details. • Control system: Multipulse64 • Electrical specifications: • Main/operating voltage: 400 V (3-phase) • Frequency: 50 Hz • Control voltage: AC / 24 V DC Bedez Dv I Tjpfx Aa Iedh • Current consumption/power input: 15 A • Max. backup fuse: 25 A

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Bjdpezvmy Hefx Aa Ijdh This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.