Used Deep Drawing Machine for sale (92,343)

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm Iedpfx Aowyup Tjacjbc X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank Ibsdjhuil Rspfx Aacjc -pump -Filter

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. Ibedpeu Itk Rsfx Aacoc The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: good (used), DROOP & REIN - SZ 100 / Lubrication Groove Broaching Machine - Maximum machining diameter: 140 mm - Spindle bore: 40 mm - Groove length per pass: 100 mm - Distance between chuck / tailstock center: 350 mm - 3 working speeds - Electric chuck guard - Good overall condition Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight: 300 kg Ibjdpfx Aaow R S Rhscec Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 00-1646/1, drilling depth: 700 mm, workpiece weight (max.): 10,000 kg, travel distance X-axis: 1,670 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, table load: 10,000 kg, travel distance W-axis: 440 mm, Equipment: chip conveyor, • Manufacturer Buck Maschinenbau GmbH !!! Special price 95,000 !!! • Machine number 00-1646/1 • Working area (mm): X 1,600, Y 1,200, Z 1,600 • W-axis 500 mm, B-axis, A-axis swivels 19° • Full machine enclosure • Chip conveyor and high-pressure coolant system • Tool holder SK50 • Heidenhain TNC 430 control • Table load capacity 10 tons workpiece weight • Spindle speed 4,000 RPM • Rapid traverse 20 m per minute • Tool changer for 20 tools • Machine can be inspected under power at any time by appointment Ibodpfx Aaou Hzqcococ

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Ibsdpev Tctusfx Aacoc

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Isdpfx Aowx E N Isacjbc Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 Ijdpfx Aowi S R Toacsbc diameter range: 8 mm drawing speed: 19 m/min mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse

Condition: like new (used), functionality: fully functional, Witech brushing machine (for wire) 4 pcs Year of production: 2015 The brush descaling/cleaning unit is designed for all wire qualities (low-high carbon) wire rod with diameter 5.5–8mm and wire speed up to max 4m/s Used for a very short time (1 year). Very good condition Iedpfx Aaewu Da Rocebc Price: 18,000 euro/piece

Condition: good (used), MEWAG - IXION TL 500 Deep Hole Drilling Machine Ibjdpfx Aowm Hcloacoc - Drilling depth approx. 500 mm - Table size 800 x 450 mm - Support/drilling table rotatable and angle adjustable from 0 to 360 degrees - Manual drilling stroke - Drill chuck - Various deep hole drills - Connection cable Dimensions: L x W x H 1.6 x 0.8 x 1.6 meters / Weight 1300 kg Subject to errors / mistakes

Condition: ready for operation (used), Year of construction: 2017, Deep hole drilling machine Ibodjw Ecftspfx Aacjc Machine type: Samag TFZ 2L-1000 Control system: Year of manufacture: 2017 TECHNICAL DATA: Speed range: 6,000 rpm Drive power: 13 kW Maximum drilling diameter: 36 mm Maximum drilling depth: 1,250 mm Travels: X-axis: 1,600 mm Y-axis: 1,050 mm Z-axis: 1,100 mm Max. workpiece weight: 7,000 kg Max. workpiece length: 1,600 mm Milling & deep hole drilling Design with double ball screw drive Coolant system & filtration Tool package

Condition: ready for operation (used), Year of construction: 1961, A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible. Ibjdpfx Aowq R N Rjacec

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Ibsdpfjw Izr Aex Aacjc Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Iedpfx Ajwi S Ixeacjbc Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Iodpfx Asv A Uw Djacebc Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 1,400 rpm, table length: 1,050 mm, table width: 1,050 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed: 50 – 3,000 rpm Centre height: 240 – 1,040 mm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm Feed rate series 2: 18 – 160 mm/min, 35 – 320 mm/min Rated motor speed: 233 – 2,100 / 465 – 4,200 rpm Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Rated motor power: 0.75 kW MACHINE DETAILS Iedpfx Aaewvi Iijcjbc Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW Overall length: 6,500 mm Overall width: 3,500 mm Overall height: 2,900 mm Weight: 8 t EQUIPMENT 3-axis digital readout by Heidenhain Including coolant unit

Condition: good (used), Year of construction: 2008, CNC Deep Hole Drilling Center Machine type: Degen UTB800/G Control: Heidenhain TNC310 Year of manufacture: 2008 TECHNICAL DATA: Isdewxaf Rjpfx Aacsbc Travel distances: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed rate: 6,000 mm/min Swivel range: Z: +/- 10° Table size: 1,100 x 650 mm Max. table load: 2,000 kg Tool holder: HSK 63 Max. speed: 4,000 rpm Drive power: 7.5 / 5.5 kW Drilling diameter: 4–25 mm Accessories: Electronic handwheel High-pressure pumps Internal cooling (IKZ): 0–90 bar Coolant tank: 600 l Paper band filter

Condition: ready for operation (used), A 3-spindle deep hole drilling machine is available. 1) Deep hole drilling unit, travel X/Y/Z: 14000mm/300mm/2650mm, drilling spindles: 3, spindle distance: 325mm–375mm, motor power: 22kW, table dimensions X/Y: 6000mm/4000mm, number of tables: 2, max. workpiece weight: 50000kg/table, max. workpiece dimensions X/Y: 12000mm/4000mm, max. drilling diameter: 65mm. 2) Milling unit, travel X: 14000mm, max. milling diameter: 52mm, milling spindle power 1/2: 8.7kW/13kW. 3) Column drilling unit Soraluce TR1-1250, travel X: 14000mm, drilling diameter: 50mm. Includes heating plates, heated decoiling plates, steam plate, chip conveyor, partial NC control Mitsubishi, and various tools and clamping devices. Documentation available. An on-site inspection is possible. Ibsdow Extyepfx Aacec

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: Ibodpfx Ajwh Rp Eeacjc - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Ibedowi Tidspfx Aacoc Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring Ijdpfjvn Sv Ujx Aacjbc CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Ijdpfx Aajwu Eb Aecjbc Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck

Condition: excellent (used), Year of construction: 2008, Drawing force 24.5 kN Machine weight 950 kg Drawing disc diameter 550 mm Drawing speed from 0.2 to max. 4.3 m/min Ibsdpfxjwv Tmpe Aacsc

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38I/8834, Offer Number: M38I/8834 Machinetype: pre-drawing machine Make: TECNO IMPIANTI Type: SKP26 Ibodpjwi Thgsfx Aacoc Constr. year: 2003 diameter range: 26 mm drawing speed: 10 m/min diameter range - mild steel: 26 mm diameter range - high tensile: 24 mm capstan diameter: 1300 mm Location: Germany

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: M38L/8943, Offer Number: M38L/8943 Isdpewi Tdzsfx Aacobc Machinetype: pre-drawing machine Info: only the draw drum Make: RMG Type: 67 Constr. year: 2020 diameter range: 11 mm capstan diameter: 700 mm clear width: 150 (160) mm Location: In our warehouse