Used Deco 13 for sale (10,279)

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: compressed air brake, Three-way tipper, body side panels hot-dip galvanized, loading height approx. 940 mm, front panel foldable for overloading, central locking system for side and rear boards, automatic rear board opening when tipping backwards, side panels can swing and be folded down, side panels with spring assistance, platform floor made of 4 mm fine-grained steel, 8 high-strength recessed lashing eyes in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously height-adjustable drawbar, removable rear stakes, gearbox-mounted support winch with load and quick modes at the front, integrated compartment in the chassis for two aluminum loading ramps, lockable ramp compartment (privacy protection), contour marking in accordance with ECE R 048 regulation, Rental price from €550, -- Errors, omissions and changes reserved, sample pictures --, More data at: !, More details: ! Ijdpfjyvzqvox Am Ieia

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiodpfx Asyvzltem Iea

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Iisdpfx Amsw Nmw Ho Isa Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: new, Year of construction: 2022, machine/vehicle number: 2112014, Field of application: Construction Empty weight: 100 kg Generator capacity: 13 kVA Isdpfx Amoxbm Twj Isia Generator: DPX SF-164C Frequency: 50 Transport dimensions (LxWxH): 0,5x0,42x0,5 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Various sizes: Ø 13-33 mm -various: recordings -Sale: only complete set Iijdpfxjb A Rbvs Am Isa -Weight: 7.2 kg

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Ijdpfx Amjyp Nykj Ieia Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Fork positioner opening range: 380 / 1245 mm Heater, full cab, full free lift, Platform height: 880 mm

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Iisdpfoyvlhljx Am Ija

Condition: good (used), Year of construction: 1999, Technical specifications Ø: 1100 mm Iiodov Tzxvepfx Am Isa Rectangular: 1300 x 1100 mm

Condition: ready for operation (used), Year of construction: 2006, bar diameter (max.): 10 mm, controller manufacturer: FANUC, controller model: 16i-TB, number of axes: 9, Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details. Isdpsytcalofx Am Ieia • Overhauled in 2016: • Checked machine, ball screws (replaced if necessary), guides, guide bushing, main and counter spindles • Complete cleaning • Maintenance carried out in accordance with Block 3 • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/features: • Moving headstock • Directed spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Sensor for tool breakage detection Additional equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER Type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar capacity: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without clamp) • “HYBRIDE 10+5” drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25 L hydraulic unit with filter • Front/rear support foot, center height 1100 mm • Electrical control box (diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Color: Anthracite RAL 7016 / Gray RAL 7035 Technical Specification Counter Spindle Yes

Condition: used, / / / / Heidenhain UV 101B Power Supply ID 317 559-13 Condition: used (functional) Iisdpfx Ameypwf Us Iea All technical specifications are subject to change without notice.

Condition: ready for operation (used), Year of construction: 2000, bar diameter (max.): 7 mm, number of axes: 9, Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details. • Movable headstock Iedpfoyr Nfljx Am Ijia • Directional spindle stop S1 • Cross slide with 4 tool holders T11–T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Motorization S2 • Integrated 25-liter hydraulic unit with filter • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional equipment • Loading magazine with drum (bar feeder) • “HYBRIDE 10+5” drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation up to 8 mm) • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Front/rear support foot, center height 1100 mm Technical Specification Counter Spindle No

Year of construction: 2003, condition: ready for operation (used), Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement. Iiodpfx Aeyypmyom Ija

Condition: used, mileage: 255,248 km, power: 220 kW (299.12 HP), first registration: 04/2009, fuel type: diesel, number of seats: 64, gearing type: automatic, emission class: euro4, color: other, brakes: retarder, total length: 12,800 mm, total height: 3,250 mm, Year of construction: 2009, Equipment: ABS, = Additional Options and Accessories = - Webasto = Further Information = Damage: none = Company Information = Iijdpfxjwyvygj Am Ioa We are an international company based in Belgium, located in the Brussels area (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers a large premises serving as an exhibition area. We always have numerous buses of all brands, capacities, models, and price ranges in stock. We can find the right coach, school bus, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical mistakes excepted. Opening hours for viewing used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: used, empty load weight: 6,750 kg, maximum load weight: 26,250 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 07/2010, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 235 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Ackermann beverage trailer | Mercedes axles with disc brakes | Toolbox | Load securing rails | Spare wheel holder | Tyres: 385/65 R22.5 | Subject to errors, input mistakes, and prior sale. Iiodpfx Aeyyn Hxjm Isa

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. 2 similar machines available! Additional information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine Iijdpfsx D Dliex Am Iea • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018)Overhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Iodpfx Ajx D D Iksm Ijia Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2003, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, directional spindle stop, and multiple cross-slides with tool holders for versatile machining. Equipped with a counter-spindle and programming software in five languages, it's ideal for complex turning tasks. Includes interfaces for bar feeders and tool breakage detection. Reach out for more information about this machine. Additional information • TB-DBCO Version 6 programming software: Single-user product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Movable headstock: S1/Z1 axis, n = 16000 rpm, F13 collet chuck • Spindle stop: Directional spindle stop S1 (programming increment 0.1 degrees) • Cross-slides: • 1 cross-slide with 4 tool holders (X1 and Y1 axes) • 1 cross-slide with 3 tool holders (Z3 and X3 axes) • 1 cross-slide with horizontal and vertical movement (Z4 and X4 axes) • Pneumatic cylinders: 3 independent for quick positioning • Counter-spindle: Independent (S4), n = 12000 rpm, F13 collet chuck • Cross Slide Support Options: • Pre-adjustable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right • S2 motorization (electric/mechanical) for driven units on the X2-Y2 linear tool carrier • Driven end drilling/milling unit: Max. speed 12000 rpm • Cross drilling/milling/tapping attachment for BSX 12 collet chuck • Sensor: Tool breakage detection with TYPE MIDI-DETECTOR, oscillating probe type MINI-DETECTOR, electrical interface, pneumatic control equipment • Interface: Adapting an LNS bar feeder Ijdpfxex D Dm Ho Am Ioia • Spinde Speed: n = 16000 rpm indicates the machine has a moderate spindle speed ional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2010, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also comes with a loading magazine, integrated hydraulic unit, and an electrical control box. If you are looking to get high-quality turning capabilities consider the TORNOS DECO 10a machine we have for sale. Contact us for more information. Additional information Iodpfxjx D Dmtj Am Isia • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Movable headstock • Directional spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Tapping attachment for collet chuck ESX 12 • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 VOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 12,000 rpm, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a "HYBRIDE 10+5" drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine. Additional information • Electrical control box • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Pivoting workpiece holder on the counter spindle • Directional spindle stop S1 • 3 pre-settable turning tool holders • 4 fixed tool holders • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Independent counter spindle • Tapping attachment for collet chuck ESX 12 • Lubrication device for guide bushing with filter Iiodpfx Amox D Dmyo Ija • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2007, bar diameter (max.): 10 mm, number of axes: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and multiple tool holders for versatile operations. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Ideal for precision turning with a lathe capacity of 10 mm. Consider the opportunity to buy this TORNOS DECO 10e Swiss type turning machine. Contact us for more information. 2 similar units available!Additional information • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement Iiodpfxox D Dmmj Am Ioa • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • 3 pre-settable turning tool holders • Motorization S2 • Tapping attachment for collet chuck ESX 12 • 4 fixed tool holders • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Lathe capacity 10 mmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,578 h, bar diameter (max.): 8 mm, number of axes: 9, This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information. • Drum with loading magazine • 10+5" HYBRID drum • Integrated hydraulic unit • Support leg rear/front • 1100 mm center height • Filter with 25 liter capacity • Electrical: 380 V, 3-phase, 50/60 Hz motor voltage • Control voltage: 24 V DC • Bar compatibility (for 14 guide tubes): • 1–4 mm diameter bars • 4 mm diameter bars • 8 mm diameter bars Additional equipment • 1 piece oil basin • 1 chip collecting basinOptional: Comprehensive package of measuring instruments Isdpox D Dm Tsfx Am Isia Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2010, bar diameter (max.): 10 mm, number of axes: 7, This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine. Additional information • Electrical control box • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Movable headstock • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12000 rpmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes Iiedpfxox D Dnde Am Isa

Condition: used, mileage: 13,642 km, power: 302 kW (410.61 HP), first registration: 06/2019, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 4,900 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 5,850 mm, loading space width: 2,430 mm, loading space height: 1,810 mm, Year of construction: 2019, Equipment: air conditioning, electric window regulation, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 10.637 cc Transmission: TRAXON, Automatic Drive: Wheel Make of engine: DAF Front axle: Tyre size: 385/65R22.5; Suspension: leaf suspension Rear axle: Tyre size: 315/80R22.5; Double wheels; Suspension: air suspension Weights Empty weight: 9.310 kg Carrying capacity: 9.690 kg GVW: 19.000 kg Functional Tipper: Back = Additional options and accessories = Isdpfx Amouc A Acs Isia - PTO - Tipper hydraulics

Year of construction: 2013, condition: excellent (used), Comes for sale: 1 piece used H crane traverse Manufacturer: SMV Scheunemann type: 13-0163 SHTS60 Iijdpfx Aoit T N Asm Ija BJ: 2013 Own weight: 4.105Kg Combined 60t and 28t load lifting points dimensions L x W x H: 5.900 x 2.700 x 1.200mm Can be inspected in our warehouse in 09599 Freiberg.

Condition: good (used), Kärcher HDS 13/35 trailer, 2017, 2400 operating hours, new service 04/25, Iedpfx Amjw D D H Ao Ioia