Used Deco 13 for sale (10,015)

Condition: used, Year of construction: 2004, functionality: fully functional, pressure: 13 bar, Used steam generator, fully equipped and housed in a container. Type: DF 1500 (Year of manufacture 1989) Burner: Weißhaupt (capable of operating on oil or gas; currently equipped for oil) New water treatment system installed in 2024 Fully installed within the container Price is net Location: Poland Gjdoyx U Igepfx Abiobw Container built in 2004. Please do not hesitate to contact us if you have any questions.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. Gbsdpfx Aozuyg Robisw The system is offered in its current condition and with the components shown in the pictures.

Condition: good (used), Year of construction: 2016, High-quality oil-injected screw compressor. Manufacturer: KAESER Model: CSDX 140 Operating overpressure: 13 bar Gbsdpfx Abjxpffnoiow Max. operating overpressure: 15 bar Operating capacity: 592 m3/h (9.86 m3/min) Motor power: 75 kW / 130 A (SIEMENS) Load hours counter: 23,100 h Dimensions: 2110 x 1290 x 1950 (h) Year of manufacture: 2016 Technical condition: used, fully functional machine.

Condition: used, Year of construction: 2012, functionality: fully functional, General overhaul, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 (25 programs with a total of 500 segments, freely selectable) -Parallel pivoting door for opening in the hot state -Slot in the oven collar on the lower right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Gbodpfx Aboyn Emqeiew Oven, industrial oven, annealing furnace, heat treatment oven, chamber oven

Condition: used, total length: 3,500 mm, total width: 1,500 mm, total height: 1,800 mm, Year of manufacture: 2008 Colour: White Empty weight: 1.400 kg - Year: 2008 - CE marking present: Yes - Serial number: 0040108 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Total stroke [mm]: 500 - Number of work zones [pcs]: 1500 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 55 - Total pressure [Ton]: 30 - Voltage [V]: 400 - Current consumption [A]: 3.6 - Fuse [A]: 16 - Power [kW]: 75.0 - Transport dimensions: 3500mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 1400kg Gjdpfs Ahyp Eex Abijbw - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), functionality: fully functional, TOS Varnsdorf WHN 13 Year of manufacture: 1979 Travel ranges: 3000 x 2000 x 800 mm Table load capacity: approx. 18 tons Table size: 1800 x 1800 mm Heidenhain 310 TNC control 37 kW Spindle: Diameter 130 / SK 50 / S800 Gjdpsz Dxq Defx Abijbw

Condition: used, functionality: fully functional, total length: 1,700 mm, total width: 1,250 mm, input voltage: 400 V, Eladó a képeken látható felső kategóriás, trópusi hűtésű (gyárilag vízrásegítéses) fiatal, szögletes Orion Trilogy 26 (13+13) vagy 39 (13+13+13) tégelyes kanyar (60-90 fokos) fagylaltpult, osztott, 2 vagy 3db 13 tégelyes elemből áll (Ha túl nagy, egy tag kivehető a rendszerből és akkor 26 tégelyes lesz), melyek egymástól függetlenül külön elektronikával vezérelhetők, új kondenzátorokkal, rendbe tett gépészetekkel, nagyon szép állapotban. Szezonra felkészített, átvizsgált állapotban azonnal vihető 400V-ról működik Telefonon elérhető vagyok H-P 8-18-ig Godpfe Ah Iz Tex Abijbw NAPRAKÉSZ, AKTUÁLIS KÉSZLETEMET MEGTEKINTHETI A FACEBOOKON A KÖVETKEZŐ CÍMEN: FAGYLALTPULT HASZNÁLT

Year of construction: 2023, condition: used, 2023 | Wheel Cleaner WEXC-13 | Used Small Equipment Gedpfx Abjznfdhsijbw 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41134 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, For sale: API Heat Transfer SIGMA industrial plate heat exchanger, manufactured by API Schmidt-Bretten GmbH & Co. KG, Germany. The unit was manufactured in 2019 and comes from an industrial installation. Technical specifications: * Manufacturer: API Heat Transfer / Schmidt-Bretten * Model: SIGMA M 13 NBN * Equipment type: Gasketed plate heat exchanger * Year of manufacture: 2019 * Serial number: PA-118673 * Maximum allowable pressure: 10 bar * Maximum allowable temperature: 150°C * Dry weight: 155 kg * Connections: Flanged * Construction: Bolted plate pack with removable plates Condition: Used industrial equipment, dismantled from an industrial installation. The heat exchanger shows normal signs of previous use, including some surface oxidation and wear. The unit has not been pressure-tested or functionally tested by us. Gjdpj Agxgaofx Abiebw Original operating instructions are included. Suitable for industrial heating, cooling, and heat recovery applications, subject to verification of process compatibility and technical specifications. Location: Rotterdam, The Netherlands Delivery: EXW Rotterdam Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty, claims, or returns. Please contact us for further information or a quotation.

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) Gedpfx Ajtbq Eqebiobw - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Gjdpfxe Adr Hxs Abiebw Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), LVD Guillotine Shear Brand: LVD Type: MCVN 31/13 Year of manufacture: 12-81 Cutting capacity for steel: 13mm Gbjdpozt Tmnsfx Abiew Cutting length: 3100mm Automatic angle adjustment Adjustable cutting clearance Power: 11KW Condition of blades: good Machine weight: 11000KG Length: 3900mm Width: 3550mm Height: 2350mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 17,000 kg, Equipment: CE marking, documentation/manual, finger protection, foot remote control, type plate available, Hydraulic shear LVD HST-C 40/13 Year of manufacture: 1995 Serial number: 22764 Technical specifications: Gjdpfx Aboz D Dnboiobw Max. sheet thickness: 13 mm Cutting length: 4050 mm Back gauge range: 1000 mm Cutting angle: 0.5° - 2° Blade clearance: 0.1 - 2.2 mm Number of strokes per minute: 7 - 28 Number of holding points: 21 Motor: 18.5 kW Weight: 17000 kg Oil capacity: 300 l Voltage: 3 x 380 V Included options: Safety standards: CE 1 square arm support, length 1500 mm 2 additional supports, length 1500 mm

Condition: used, Year of construction: 1996, functionality: fully functional, power: 655 kW (890.55 HP), VEÅ UNIVEX 10F H-13. Steam boiler. 655 kW, 1000 kg/h. Gjdo Aa Rhmopfx Abiebw Manufactured in 1996.

Condition: good (used), Eccentric press Inventory no. 3946 Manufacturer: Ter Hart Type: EP 13 * Pressing force: 13 tons * Stroke adjustment: 5-50 mm * Adjustable ram: 35 mm Gbodo Af Uwlopfx Abiew * Table dimensions: 330 x 230 mm * Installation height: 200 mm * Overhang: 115 mm * Foot-operated * Weight: 520 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2032, mileage: 374,970 km, power: 324 kW (440.52 HP), first registration: 09/2015, fuel type: diesel, empty load weight: 10,620 kg, overall weight: 20,500 kg, tire size: 315/80/22.5, axle configuration: 4x2, wheelbase: 3,650 mm, next inspection (TÜV): 02/2026, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: ABS, additional headlights, air conditioning, car registration, cruise control, differential lock, hydraulics, low noise, navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, TGS 18.440 BL , ZF manual gearbox , !!! NEW CLUTCH !!! , Meier Ratio ( Palfinger ) AK 13 M body with automatic container securing , cab and radio remote control , NAVI , lane departure warning , distance assistant , headlight cleaning system , reversing camera , German vehicle from 1st hand We deliver to any German seaport . Gedpfx Abjq E N T Ejijbw Sale only to traders and under exclusion of any warranty

Condition: used, Year of construction: 1998, functionality: fully functional, The used AVM ANGELINI DG13 2-axis CNC lathe is a medium to large-sized, 2-axis numerically controlled lathe with an inclined bed, featuring a center distance of 850mm, an ASA 8” spindle nose, and a maximum bar capacity of 90mm. It was manufactured in 1998 (installed in 2000), complies with “CE” standards, and is equipped with a FANUC 0-T CNC control. It features a 315mm hydraulic chuck, a 26kW spindle motor, a 12-position automatic tool changer turret (with corresponding tool holders), and is complete with a tailstock, a chip conveyor, manuals, and a “CE” certificate. Gbodpfx Abjzu Awfeiow

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,513 h, load capacity: 1,300 kg, lifting height: 3,230 mm, fuel type: electric, mast type: telescopic, construction height: 2,100 mm, battery capacity: 875 Ah, battery voltage: 24 V, fork length: 1,200 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 2,674 kg, total height: 2,100 mm, total length: 1,850 mm, total width: 1,050 mm, fuel: electricity, Equipment: sideshift, STILL RX 50-13 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.300 kg Lifting height: 3.230 mm Closed height: 2.100 mm Mast: Standard (2W323) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 24V Battery: 24 V 875 AH v. 2018 Charger: 24 V - not tested Tyres: Superelastik SE 18 x 7 - 8 (60%) / 18 x 7 - 8 (70%) Service weight: 2.674 kg Length: 1.850 mm Width: 1.050 mm Year of manufacture: 2018 Operating hours: 4.513 h Condition: working condition EQUIPMENT 3rd valve, Overhead guard cover, Front windscreen, Load backrest, Pulse control ATTACHMENTS Load backrest, Sideshift Gsdpfx Aez Aqm Robijbw Internal no.: 1309163 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Gbjdpfx Abowxdctsiew Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: used, Year of construction: 2011, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors total power requirement 7,2 KVA weight of the machine ca. 450 kg dimensions of the machine ca. 1,8 x 1,5 x 1,9 m Coolant System BMF - BFU 600 8/20 -13 - from CTX beta 800 V4 - universally applicable Gbjdpfx Aozb N Urjbijw - controllable via contactors - Includes paper belt filter - Number of pumps: 2 - Pump capacity: 0.75 kW, 2,880 rpm, Q: 2 m³/h, H: 65.2 m, T: 90°C max. 4.0 kW, 2,930 rpm, Q: 4 m³/h, H: 177.7 m, T: 90°C max.

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Gedpfx Abszwylxoijbw Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, cutting length (max.): 3,100 mm, cutting width (max.): 3,100 mm, table length: 3,100 mm, table width: 3,100 mm, Used quality Edwards Pearson 3metre x 13mm hydraulic sheet metal guillotine High Quality used Edwards Pearson VR 13/3000 Hydraulic Shear For Sale New / year 2000 Complete with front support arms and front operated back gauge / Cybelec DNC 10 control Rapid blade adjustment for thinner sheets Maximum material thickness 13mm x 3metre wide Fully serviced in good working condition Video Available upon request Gbedpfoumlbwex Abiow

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Gbjdpfx Aey D U Dfsbiow Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes -Maximum temperature: 1300 °C Gbodpfoy Avmlex Abiow -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Condition: good (used), Year of construction: 2009, CN Heidenhain TNC 530 Travel X – 3000 mm Travel Y – 2000 mm Travel Z – 1200 mm Travel W – 730 mm CNC table 1600 x 1800 mm Max. workpiece weight – 15 t External coolant system, 4 nozzles Heidenhain rotary table with B-axis Heidenhain linear scale, X-axis – 3000 mm Heidenhain linear scale, Y-axis – 2000 mm Gsdjz H Ui Uspfx Abisbw Heidenhain linear scale, Z-axis – 1200 mm Spindle support 250 mm Safety guard