Used Cut To Length for sale (47,710)

Condition: used, clear span: 2,700 mm, total length: 14,040 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 1, Technical data for the pallet racking system: Racking system: Bito Type: Pro Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 14,040 mm Number of bays per racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Technical data for volume: Pallet spaces per bay: 09 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 1,000 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: Sendzimir galvanized Type: P 2 Profile dimensions: 90 x 65 x 1.75 mm Including cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted framework) 4,500 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: blue Box profile: 120 x 50 mm Beam type: PT120M Connector: 5 hooks Clear width: 2,700 mm Max. load per beam pair: 3,000 kg, with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 06x Upright protection, used Material color: yellow Overall height: approx. 715 mm Overall width: approx. 99 mm Internal width: approx. 92 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 3.5 mm Weight per unit: 4.96 kg Quantity: 01x / Pallet racking upright 24x Bolt anchor, new Manufacturer: Hilti Type: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and shelf loads, Rcsdpoz Azthsfx Akieh Manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), clear span: 2,775 mm, total length: 17,350 mm, load per truss pair (max.): 1,023 kg, Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 17,350 mm Number of bays per racking row: 6, each 2,775 mm Number of levels including the base level: 6 Technical data for the capacity: Pallet spaces per bay: 21 Pallet spaces per racking row: 126 Total pallet spaces: 126 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): approx. 341 kg Included in the scope of supply: 07x Pallet racking uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole pitch: 50 / 50 mm incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted truss) Redpfx Akez A D Dgoiech Height: 9,000 mm Depth: 1,100 mm 72x Pallet racking beams, used Material color: orange Box profile: 85 x 40 mm Beam type: GN85x41 Connector: 5 hooks Clear width: 2,775 mm Max. load per pair of beams: 1,023 kg, with evenly distributed load. 144x Locking pins, used Material color: Sendzimir zinc-plated For securing the longitudinal members against unintentional lifting out. 28x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, zinc-plated Approved for: cracked concrete 14x Shims, used Design: completely zinc-plated For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Rodpfxez A D Irs Akioch Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Rcsdpfx Akeyn Uc Ieish Subject to errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, sheet thickness (max.): 350 mm, sheet thickness steel (max.): 20 mm, total width: 2,450 mm, total height: 2,350 mm, total length: 4,800 mm, cutting height (max.): 350 mm, workpiece weight (max.): 6,500 kg, warranty duration: 36 months, space requirement length: 3,150 mm, space requirement height: 5,000 mm, space requirement width: 2,450 mm, Equipment: documentation/manual, The Bluemotion HCP Series CNC Plasma is engineered for fabricators who demand precision, reliability, and ease of use. Designed and manufactured in Ireland, every HCP Series machine is built using premium industrial components and supplied with industry-leading Hypertherm technology as standard, delivering exceptional performance from the very first cut. Standard Features: - Hypertherm Edge® Connect CNC Control - Hypertherm ProNest® CAD/CAM Software Included - 350mm Gantry Clearance for processing sheet metal, 3D Profiles - Bosch Rexroth Linear Motion Components - Fully Servo Driven Axes with Servo Motors & Drives - Sealed Energy Chains for max. reliability in harsh workshop environments - Integrated Laser Pointer for fast and accurate plate alignment - Intelligent 3D Collision Detection to protect the torch and machine - Heavy-Duty Welded Steel Construction - Intuitive operation with a streamlined workflow from CAD to cut. - Comprehensive Commissioning & Operator Training From importing a DXF into Hypertherm ProNest to producing finished components, the HCP Series has been designed to maximise productivity while remaining straightforward to operate. Whether you're producing one-off prototypes or high-volume production work, the HCP Series delivers the accuracy, speed and reliability modern fabrication businesses expect. Rsdpfezpzwmjx Akioch Every Bluemotion machine is backed by expert technical support, professional installation, and ongoing after-sales service to ensure you get the maximum return on your investment. This price includes: - Hypertherm 85A SYNC Plasma Source (20mm Pierce Capacity) - 3-Year Full Machine Warranty Built in Ireland. Trusted by fabricators. Designed to perform.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm Rcjdpfez N Dqusx Akioh This table has NO option for low e deletion

Condition: used, mileage: 11,491 km, power: 175 kW (237.93 HP), first registration: 08/2020, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2027, color: orange, gearing type: automatic, emission class: euro6, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Well-maintained, like-new 12-ton Mercedes-Benz Atego 3 truck with a 6-cylinder engine, Meiller three-way tipper, payload of 5,740 kg, 3-seater, air conditioning, high-performance engine brake, automatic transmission, differential lock, trailer hitch with pintle hook and ball hitch for trailers, hydraulic connections for the tipper, reversing camera, only approximately 11,491 km, and more. Equipment: S-cab Classic-Space, short version with rear window 3 seats Wheelbase 3,260 mm Weight variant 11.99 tons (4.9/8.1) Unladen weight 6,250 kg Payload 5,740 kg Engine OM936 R6 7.7 L with 238 hp and 1,000 Nm Engine Euro 6 D Drive 4x2 Meiller three-way tipper, 4.20 m x 2.35 m, side walls 0.50 m high Front wall 700 mm high Tie-down points in the tipper bed Automatic transmission type G 90-6/6.70-0.73 Mercedes-Benz PowerShift 3 Differential lock in rear axle Front and rear axles with leaf springs Stabilizer for extreme high loads on the rear axle Front axle 5.3 tons, rear axle bevel gear 390 hypoid 11.0 tons Front spring 5.1 tons, rear spring 8.1 tons Axle ratio i = 4.300 Air conditioning Electronic braking system with ABS, ESP, and ASR Rcedpfx Aksz S Skneioh High-performance engine brake Lane keeping assist Active Brake Assist Disc brakes on front axle and drum brakes on rear axle Cruise control Reversing camera Trailer hitch with pintle hook and air pressure connections Trailer load with continuous braking system 12,000 kg Hydraulic connections at the rear for tipping trailers Trailer hitch with ball hitch for trailers up to 3.5 tons Exterior sun visor Roof hatch Work lights Electrically adjustable side mirrors and electric windows Comfortable driver's suspension seat with velour upholstery Very well-maintained and in very good condition with only 11,491 km Price NET, plus 19% VAT. We will gladly provide you with attractive financing options. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2624

Condition: used, machine/vehicle number: G11762, Rotor diameter: 200mm Rotor width: 100mm Rcedpfx Aez N Ix Nokish Rotor blades: 32 rows Stator blades: 1 row Inlet cross-section: approx. 90 x 10mm Drive motor: 4.0 kW Mechanical feed device for extruder strands

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Rotor width: 200 mm Rotor blades: 3 rows Stator blades: 2 rows Rcjdez N Iyajpfx Akioh Inlet cross-section: approx. 300 x 200 mm Drive motor: 2.2 kW

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, machine/vehicle number: W/S0202302027375, type of cooling: water, Equipment: documentation/manual, STAHLWERK CUT 160 P IGBT Plasma Cutter - powerful 160 amp, precise high-frequency (HF) pilot arc for first-class arc starting. The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and features a precise high-frequency (HF) pilot arc for first-class arc starting. The cutting performance is up to 52 mm, depending on the material (structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). In addition to common conductive metals, the plasma cutter is also suitable for coated sheets and surface rust. The cutting current can be adjusted steplessly from 20 to 160 amps. The compact unit features smart cooling and overheating protection and is easy to transport at only 38.3 kg. • Plasma / CUT - A plasma arc is generated by means of current, which melts the material, which is then removed with compressed air. This allows all conductive metals, such as standard steel, stainless steel, copper, aluminum, titanium, etc., to be cut precisely with ease. • Cutting thickness - Cutting up to 52 mm is possible, depending on the material. Structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm. • Pilot arc - High-frequency (HF) pilot arc for first-class arc starting. No contact with the workpiece is necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included. • Cutting current - Stepless adjustment from 20 to 160 A. • Airflow - After the cutting process is completed, air flows to cool the torch and reduce wear on the nozzle and electrode. • 2T/4T - determines the control of the operating mode and offers extended control over the current profile. In 2T mode, the high-frequency ignition (HF) remains active until the trigger on the torch is released. In 4T mode, the arc is ignited after the trigger is pressed and released once. After another press and release, the ignition is stopped. • Lightweight & compact design - With a weight of only 38.3 kg and dimensions of 630 x 320 x 600 mm, the unit is ideal for cutting work in any location. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy lifting, thanks to the transport rollers under the unit! • Highest efficiency & performance - Three-phase alternating current (400 V) powers the unit and allows an output power of a true 160 amps. • Smart cooling & overheating protection - State-of-the-art technology, an integrated overheating protection and a high-performance cooling system enable the maximum performance to be achieved. • Water cooling - The high-performance water cooling guarantees optimal cooling of the entire hose pack at all times. The water cooler is already included in the scope of delivery! Product details Operation of the Stahlwerk plasma cutter Power connection 400 V | 20 A Compressed air as gas Required pressure no manufacturer's specification Air flow no manufacturer's specification Cutting Duty cycle at maximum 60 % Max. current for continuous cutting 32.6 A Cutting depth structural steel ST37 10 mm Cutting depth V2A and V4A stainless steel 7 mm Cutting depth aluminum 4 mm Cutting current 20 - 160 A Ignition Pilot arc Inverter IGBT Accessories Plasma torch Length 5 m Plasma nozzle Plasma electrode Ceramic cap Redpfx Akjz Rivfjiech Cutting nozzles, ceramic caps, protective clothing available as accessories.

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser Rcedpfoz Rl Taox Akijh - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Rcodpfxsz Rl Eio Akish Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Year of construction: 2012, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology Redpez A S Dnefx Akioch -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-DT -Drive motor: Siemens 2.2 kW -Funnel opening: 620 x 350 mm -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm -Weight: 192 kg

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 76-1302, overall weight: 7,900 kg, input voltage: 380 V, input frequency: 50 Hz, Schneider CNC die-cutting machine, Type 2032, with vibrating table, Type 3041 Redpfx Akez R Dncsijch For sale is a high-performance CNC die-cutting machine from the Swiss quality manufacturer Schneider Maschinenbau AG, including a vibrating table, Type 3041. The system is ideally suited for processing and die-cutting cardboard, corrugated cardboard, and packaging materials. Thanks to its robust industrial design, the precise NUM-750 CNC control system, and the automatic material handling, the machine still offers an economical solution for many packaging and display applications today. Technical data, Schneider Type 2032 Year of construction: 1992 CNC control: NUM 750 Power: 28 kW Voltage: 380 V / 50 Hz Operating pressure: 100–240 bar Machine weight: approx. 7,900 kg Swiss Made Vibrating table, Type 3041 Year of construction: 1986 Power: 3 kW Weight: approx. 1,600 kg Equipment CNC-controlled die-cutting system Hydraulic clamping system Automatic material feed Pneumatic hold-down devices Includes vibrating table Extensive conveying and feeding system Condition The machine comes from industrial use and can be inspected by appointment. Sale includes all existing system components as shown in the photos. Total weight of the system: approx. 9.5 tons Inspection possible at any time by arrangement. Loading and transport are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Rcodpfxjz Hcr Dj Akieh Inspection and demonstration under power are possible by appointment.

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) PAINTING Mazak standard color PROTECTIVE HOUSING Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Rcsdpfoyucgujx Akish Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Rcjdpfx Aeyuchxekijh Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Rjdpfx Aozgu Rnekisch Mains voltage 3x400V Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Condition: used, mileage: 262,811 km, power: 170 kW (231.14 HP), first registration: 03/2020, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 04/2027, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, loading space volume: 27 m³, loading space length: 5,000 mm, loading space width: 2,484 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, ATEGO 923 L refrigerated box truck, 5 m with tail lift, BÄR 1,500 kg * THERMOKING V-600 MAX in-transit refrigeration * Permissible total weight 9,500 kg = payload approx. 3,550 kg * Vehicle number for customer inquiries: 4839 * Active Brake Assist * Differential lock, rear axle * Air conditioning * Engine version Euro VI, D * Lane Keeping Assist * Tail lift * High Performance Engine Brake Rodez Rrcnjpfx Akisch * Air suspension, rear axle * Air deflector, without base trim, lockable * Rain/light sensor * Electronic Stability Program (ESP) * Electronic braking system with ABS and ASR * Driver's comfort suspension seat * Power windows, electric, on both sides * Transmission G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Locking system, with central locking * Exterior sun visor, transparent * Cruise control * Low storage tray, on engine tunnel * AdBlue tank 25 l * ClassicSpace * Roof hatch/ventilation flap, roof * Weight variant 9.5 t (3.8/6.2) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Fuel preheating * Plastic tank 120 l, left * Engine OM934, R4, 5.1 l, 170 kW (231 hp), 900 Nm * Wheelbase 3620 mm * Tires tubeless, 235/75 R 17.5 VA * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer, for extreme high loads, rear axle * Front spring 4.0 t, parabolic * Preparation for toll collection * Tachograph digital, 2nd generation, ADR * Environmental badge (green) * Two-seater * Serviced according to maintenance schedule * 2/3-door No liability for printing and typographical errors Sale only to commercial customers Errors and prior sale excepted* Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer Warranty insurance possible upon request from the insurer * TÜV/UVV tail lift inspection/tachograph test and installation of OBU device by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 262,811 km, power: 170 kW (231.14 HP), first registration: 03/2020, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, color: black, gearing type: automatic, emission class: euro6, loading space volume: 27 m³, loading space length: 5,000 mm, loading space width: 2,484 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, ATEGO 923 L refrigerated box van, 5 m with tail lift, BÄR 1,500 kg * THERMOKING V-600 MAX, in-transit refrigeration * Permissible total weight 9,500 kg = payload approx. 3,550 kg * Vehicle number for customer inquiries: 4839 * Active Brake Assist * Differential lock, rear axle * Air conditioning * Engine version Euro VI, D * Lane Keeping Assist * Tail lift * High Performance Engine Brake * Air suspension, rear axle * Air deflector, without base trim, lockable * Rain/light sensor * Stability Program (ESP) * Electronic braking system with ABS and ASR * Driver's air suspension seat, comfort * Power windows, electric, on both sides * Transmission G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Locking system, with central locking Rcedpfjz Rrcujx Akieh * Exterior sun visor, transparent * Cruise control * Storage compartment, low, on engine tunnel * AdBlue tank 25 l * ClassicSpace * Roof hatch/ventilation flap, roof * Weight variant 9.5 t (3.8/6.2) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Fuel preheating * Plastic tank 120 l, left * Engine OM934, R4, 5.1 l, 170 kW (231 hp), 900 Nm * Wheelbase 3620 mm * Tires tubeless, 235/75 R 17.5, front axle * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer, for extreme high loads, rear axle * Front spring 4.0 t, parabolic * Preparation for toll collection * Tachograph digital, 2nd generation, ADR * Environmental badge (green) * Two-seater * Maintained according to service schedule * 2/3-door No liability for printing and typographical errors Sales only to commercial customers Errors and prior sale reserved* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer Warranty insurance possible upon request from the insurance company * TÜV / UVV, tail lift inspection, and installation of OBU device by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 163,350 km, power: 220 kW (299.12 HP), first registration: 08/2022, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2027, color: white, gearing type: automatic, loading space volume: 45 m³, loading space length: 7,960 mm, loading space width: 2,460 mm, loading space height: 2,290 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, ATEGO 1530 L box van, 8 m, with BÄR tail lift, 1.5 tons. * Permissible total weight 16,000 kg = payload approx. 8,510 kg * Vehicle number for customer inquiries: 4852 * Engine version Euro VI, E * Active Brake Assist * Differential lock, rear axle * Air conditioning * Middle seat, with 3-point seat belt * Lane Keeping Assist * Tail lift * Trailer coupling G 145, for ZAA (central towing hitch) * Trailer coupling Ringfeder * High Performance Engine Brake * Light sensor * Air suspension, rear axle * Air deflector, without base panel, lockable * Rain sensor * Electronic Stability Program (ESP) * Auxiliary heater, hot air, 2000 W * Reversing camera * Airbag, driver * Trailer brake, 2-line * Trailer socket 24 V, 15-pole * Electronic braking system with ABS and ASR * Driver's comfort suspension seat * Window lift, electric, on both sides * Gearbox G 140-8/9.30-0.79 * Mercedes PowerShift 3 * Locking system, with central locking * Cruise control * AdBlue tank 35 l * ClassicSpace * Roof hatch/ventilation flap, roof * Weight variant 16.0 t (6.1/10.5) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Plastic tank 180 l, left * Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm * Cross member, retrofitting, trailer coupling G145 ZAA * Wheelbase 5360 mm * Tires tubeless, 305/70 R 19.5 front axle * Inline engine, 6 cylinders * Reversing warning * S-cab ClassicSpace, extended, 2.30 m, tunnel * Stabilizer, under frame, rear axle Rcsdpfx Aj Adv Srekioh * Front spring, 6.1 t, parabolic * Preparation for toll collection * Snow chains Onspot * Tachograph digital, 2nd generation, ADR * Environmental badge (green) * Maintained according to service schedule * Three-seater No liability for printing and typographical errors Sales only to commercial customers Errors and prior sale excepted* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING-FINANCING-RENT-TO-OWN offer * Guarantee insurance possible on request from the insurance company * TÜV / UVV tail lift inspection / Tachograph test and installation of OBU device by our partners on site * Customs license plate for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * * Alexander Pittas * Robin Pittas * WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: excellent (used), For sale: Hypertherm Powermax 800 D plasma cutter in very good condition. /////Price stated is for 1 unit/////. Hypertherm Powermax 800 plasma cutter Rodpfsz Sb I Dex Akisch Plasma cutter description: The Powermax800 plasma cutting system uses an inverter power supply to provide smooth DC output voltage, ensuring excellent cutting and grooving quality for mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply provides a constant output current with a variable range from 20 to 50 amps, ensuring optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and pierce metals up to 1 inch (25 mm) thick.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm Rcedpoxgua Ajfx Akieh 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: new, laser power: 6,000 W, sheet thickness stainless steel (max.): 18 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 10 mm, working length: 3,048 mm, working width: 1,524 mm, workpiece weight (max.): 900 kg, overall weight: 4,980 kg, total length: 4,955 mm, total width: 2,320 mm, total height: 2,200 mm, Bodor Power Laser Source 6 kW Bodor Genius Laser Cutting Head with Autofocus Bodor Thinker 3.0 Control System Bed with mortise and tenon structure Bodor Servo Motor and Driver Bodor Oxygen Control Valve and Nitrogen Control Valve 21.5-inch touch screen monitor Door safety interlock Easily accessible sliding bed Bodor Lightning Piercing Technology Automatic adjustment of cutting gas pressure Expert database for laser cutting technology Active anti-collision function Ergonomic remote control (Bodor Mango®) Anti-slag protection Gas-saving nozzles with stable flow Intelligent maintenance reminder WiFi internet connectivity Laser fault alarm Water chiller Rsdpfx Aexxa Shokijch Exhaust system i7 LENGTH (mm): 4955 WIDTH (mm): 2320 HEIGHT (mm): 2200 MACHINE WEIGHT (kg): 4980 WORKING AREA (mm): 3048 x 1524 MAX. WORKPIECE WEIGHT (kg): 900 MAX. SIMULTANEOUS SPEED (m/min): 100 MAX. ACCELERATION: 1.5G POSITIONING ACCURACY (mm): ± 0.05 REPEATABILITY (mm): ± 0.03 SCREEN SIZE (inches): 21.5 LASER POWER (kW): 6 MAX. SHEET THICKNESS CARBON STEEL (mm): 22 MAX. SHEET THICKNESS STAINLESS STEEL (mm): 18 MAX. SHEET THICKNESS ALUMINUM (mm): 16 MAX. SHEET THICKNESS BRASS (mm): 10

Condition: used, Year of construction: 1995, CNC portal cutting machine Manufacturer: Messer Rsdpfjyay Dhex Akisch Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel cutting torches, type ALFA 8 x Omnilift 200 Without rail system Without table Without filter 191026ä