Used Cut To Length for sale (46,980)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Nwjdsxxu Drepfx Abkoh

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request Nwsdjwak U Espfx Abkoh

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Nodpfxjid Szve Abkowh Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Nwsdpfsx Th Sujx Abkeh Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, load capacity: 8,000 kg, Hangcha forklift CPCD 80-RW14, 8-ton lifting capacity, side shifter, automatic fork adjustment. Very good condition, technically flawless, from second owner. Only 1,170 original operating hours, year of manufacture 2007. 6-cylinder Isuzu engine, dry and in perfect condition. Engine starts immediately, even at minus 10 degrees. Newly serviced, new rear tires. Lifting height 4 m, overall height 3.2 m, fork length 1.8 m, including 2.8 m fork extensions. Lighting, indicators, etc. With cabin, air conditioning, heating – everything works. Own weight 11,490 kg. Njdpfxsylh Hzs Abkswh

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, Equipment: foot remote control, rotational speed infinitely variable, 3000 kg load capacity welding positioner, complete set Horizontal load capacity: 3000 kg, tilted load capacity: 3000 kg 2 gears for tilt adjustment Motor protected by two steel swing doors Very robust design Speed steplessly adjustable from 0.05 to 0.7 rpm (optionally up to 1.5 rpm) Turntable diameter: 1400 mm Tilt up to 120° Height horizontal: 1300 mm, tilted to center: 1050 mm Nodpfx Abjw T S Huokswh Dimensions: Length 2.0 m x Width 1.4 m Handheld remote control with digital display and dual foot pedal

Condition: good (used), Marel SC90 Salmon Slicer Salmon Slicer Model: SC90 Silk Cut 11 D Cut slicer Single Lane Nwjdpfev Dmz Dex Abkeh With adjustable slice thickness and angle Up to 90 slices per minute Slice angle: 8-20 degree Dual frequency 50/60Hz

Condition: excellent (used), Year of construction: 2011, Details Manufacturer: Berg & Schmid. Model: GBS250 Super AutoCut. Year of manufacture: 2011. Condition: in excellent working order. Cutting capacity Round materials (90°): Ø 250 mm Square materials (90°): 230 x 230 mm Round materials (45°): ± 210–220 mm Round materials (60°): ± 160–170 mm Saw blade length: ± 3,000 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre angle & position Left mitre angle: 0–60° Right mitre angle: 0–45° Hydraulic saw arm with adjustable cutting pressure Dimensions Length: approx. 1500 mm. Width: approx. 1700 mm. Height: approx. 1800 mm. Nwjdpsy U Dykofx Abksh Weight: approx. 500 kg.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Nedpfx Aezgc Uhsbkjwh Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Nwjdpfx Aszgc Ubjbksh This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Nedpfx Absy Sxvhokewh Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Nodpfxevfx Ulj Abkewh Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: used, Year of construction: 2005, functionality: fully functional, Excellent condition, low mileage machine! There is a video of it in action. Nodpfx Aozgvunobkjwh

Condition: excellent (used), functionality: fully functional, workpiece diameter (max.): 65 mm, spindle speed (max.): 2,800 rpm, For sale is a Jean-Wirtz wet cutting machine in good used condition, as shown in the photos. Nwsdpfxsy N U Ets Abkoh Technical specifications: • Manufacturer: Jean Wirtz • Cutting disc diameter: up to approx. Ø 250 mm • Cutting capacity: approx. Ø 65 mm • Table travel (cutting stroke): approx. 160 mm • Cutting table: approx. 345 x 155 mm (W x D) • Motor power: approx. 2.2 kW (3 HP) at 2800 rpm • Power supply: 400 V / 50 Hz / 3-phase • Condition: Used, in working order Shipping costs via freight forwarder: approx. €120 International buyers are welcome! You will receive an invoice with VAT shown. Viewing / pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, ex works. Subject to errors in technical data and prior sale.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software Nsdoy Snwnepfx Abkewh - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2018, operating hours: 4,500 h, MT Cut UDS1785 Travel distances: X 850 mm Y 520 mm Z 610 mm Tool interface: HSK 63 Rapid traverse rate X/Y/Z: 32 m/min Tool magazine: 60 positions Nodpsy Ug Epefx Abkewh Machine weight: 6,800 kg Control system: Heidenhain TNC 640 Coolant through tool, 50 bar Spindle speed: max. 12000 rpm Articulated band conveyor, discharge to the left Air through the spindle BLUM A2, laser system for tool measurement Measuring probe: Heidenhain TS 460 Rotoclear, rotating viewing window Emulsion mist extraction, SARA UC2D Year of manufacture: 2018 Spindle operating hours: 4512

Condition: excellent (used), Year of construction: 2002, Iberica JRK-105 Automatic Die Cutter Year – 2002 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 400 x 350 mm Cardboard thickness up to 1.5 mm Corrugated board thickness up to 3 mm Clamping capacity: 9-17 mm Maximum speed: 8500 sheets/hour Maximum pressure: 300 t Stripping section Nsdpoy Uwznjfx Abkowh Separation section Centerline 1 mm plate Micro-adjustment Double sorting unit

Condition: excellent (used), REMS Cut 110-75-50 Nwjdpfx Ajy Rt Icjbkoh

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. Year of manufacture: 2009. Sturdy construction ensures precise operation. Interchangeable blades. Adjustable margins. One set of blades included. Compressed air powered. Nwedpey Tu T Sjfx Abksh

Condition: used, Format: 0x0 Equipment: Nsdpfxjyf Ih So Abkowh With hot glue machine

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 25 - 80 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm Nwjdpfxod Iip Te Abkeh stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm Nwsdpjd Iip Uofx Abkoh cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: excellent (used), Year of construction: 2011, input voltage: 400 V, Equipment: CE marking, Mitre Band Saw - For left mitre cuts up to 60° and right up to 45° - Cutting speed: 37 and 74 m/min. - Automatic saw frame lowering with rapid approach to the workpiece and shut-off at end of cut - Quick-release vise in T-slot, sliding for quick position change - Chip removal brush - Automatic cooling system - Machine base - Incl. 1 HSS-Biflex saw band 2765 x 27 x 0.90 mm Cutting capacity: 90° Round Ø 255 mm Square 240 mm Rectangle 300 x 180 mm 45° Round Ø 210 mm Square 190 mm Rectangle 210 x 100 mm Njdpoy Id Dcsfx Abkswh 60° Round Ø 135 mm Square 115 mm Rectangle 140 x 90 mm

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Nwedpsy Nzk Nsfx Abkjh Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: new, Berg & Schmid Bandsaw Machine GBS 218 Eco AutoCut For mitre cuts to the left up to 60° Nodpfxoyw Ta Sj Abkjwh Clamping vise with quick-release mechanism Carbide saw band guides for highly precise cuts Integrated blade tension control, electric coolant system, machine base 3-stage AutoCut system with manual function, Motor: 400 V / 1.2 kW Weight approx. 240 kg, cutting speed 30 + 70 m/min Includes 1 special saw band 2455 x 27 x 0.90 mm Cutting capacities: 90° round / square / rectangular: 220 / 210 / 230 x 185 mm 45° left round / square / rectangular: 150 / 150 / 150 x 210 mm 60° left round / square / rectangular: 90 / 90 / 90 x 100 mm