Used Cts for sale (254)

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Cjdovb Hanopfx Agzspw Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Cpsdpfjvcyawex Agzsw Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests Cpsdpfjxdi Ezsx Agzew - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: Cpedpfxjw U Awms Agzjw - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS Model: C-40/350 Air-cooled climate test chamber For sale is a professional CTS climate test chamber, model C-40/350. This unit is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: * Heating: 3.5 K/min * Cooling: 4 K/min - Heat compensation: * approx. 3500 W at +20°C * approx. 2000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specification: - Refrigeration unit: air-cooled, low-noise, fully hermetic, variable power control by electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber: * Floor loading: 150 kg/m² * Shelving grid: stainless steel, support area 620 x 600 mm * Max. load per shelf: 35 kg * Max. total load with maximum shelves: 100 kg Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric input for setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test item control Dimensions: - Test chamber volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm Csdpex Ekupsfx Agzspw - External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: (value not specified)

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climatic test chamber allows you to evaluate the functionality or material properties of your test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculation rate ensures optimal climatic transfer to the test specimens. The air treatment chamber is located at the rear of the interior space. Equipment assemblies are installed in a separate frame behind the unit, providing easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A fan can be used to flush the test chamber with fresh air. Technical Specifications: Codpfx Aox Anipogzspw Temperature Tests: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - Without heat radiation - In steady-state conditions All technical data refer to an ambient temperature of +25 °C, rated voltage of 400 V, without test specimens, no thermal radiation, and without additional equipment. Dimensions: Internal (test chamber/usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (may vary slightly by configuration) External dimensions: Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Design: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A Weight: 6000 kg Notes: - Viewing by appointment (46325 Borken) - Shipping by freight carrier possible; costs & arrangement upon request - Delivery scope: (see photo) - (Subject to change and error in technical specifications—information provided without obligation.) - For further questions, please contact us by phone.

Condition: used, Complete LOADING, CUTTING & DEBURRING LINE & UNLOADING, manufactured by RALC CTS CONNI OPTIONAL : AUTOMATIC ROBOTIC BUNDLING SYSTEM in squares/hexagonal bundles, with exit carriage and safety areas Model RALC LYBRA 450 + RALC SDB 100 – 5000 - Cutting range: 40-140mm - Bundle loader: 6,000mm - 12,300mm x 5Tn - Unloading: Up to 5,000mm - Optional: Automatic robotic packing system BUNDLE SPECIFICATIONS: Weight at loader: 5000 Kg Diameter max.: 600 mm Min. – max. tube length at entry: 6000 – 12300 mm Max. bending of the tubes at entry: 1.5 mm/m CUTTING Possible diameters with loader: - Rounds : 40 – 140 mm - Squares : 40x40 – 135x135 mm - Rectangles : 50x25 – 200x80 mm Max. tube weight: 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350-400-450 mm Disc holding acc. to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm Max. tube length at exit: 5000 mm DEBURRING Deburring unit Dimensions: - Rounds diameter: 20 – 102 mm - Squares: 30x30 – 70x70 mm - Rectangles: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz MITRE CUTTING With manual loading, it is also possible to make MITRE CUTTING Cutting Capacity (without loader) Round tube: - At 90º: 100 – 125 – 145 mm - At 45º: 90 – 115 – 135 mm - At 30º: 80 – 95 – 110 mm Squares: - At 90º: 90 – 110 – 130 mm - At 45º: 80 – 100 – 110 mm - At 30º: 70 – 80 – 90 mm Rectangles: - At 90º: 140x70 – 160x90 – 180x110 mm - At 45º: 110x60 – 130x70 – 150x70 mm - At 30º: 80x40 – 100x50 – 110x60 mm SCOPE OF SUPPLY 1. Loader Mod. CM5FT12 for 5000 kg bundle from 5000 to 12300 mm length 2. Cutting unit Mod. LYBRA C450 with: - Micro-lubrication - Air blowing - Chips conveyor - Tilting carriage - Unloading clamp 3. Deburring unit Mod. SDB100 5000 4. Exit collecting cradle with endless slings Cpjdpfx Ajvt Tzcogzsw 5. Complete electrics & hydraulics 6. Existing documentation * 7. Existing spares * *To be checked before order OPTION : Front collecting automatic portal with robot, capable of packing round, square, or rectangular tubes in hexagonal or square bundles Cutting range: 40 - 140 mm Bundle loader: 6.000 mm - 12.300 mm x 5 Tn Unloading: Up to 5.000 mm Optional: Automatic robotic packing system Bundle weight at loader: 5000 Kg Bundle diameter max.: 600 mm Tube length at entry: 6.000 – 12.300 mm Bending of the tubes at entry: Max. 1.5 mm/m CUTTING Possible diameters with loader, rounds: 40 – 140 mm CUTTING Possible dimensions with loader, squares: 40x40 – 135x135 mm CUTTING Possible dimensions with loader, rectangles: 50x25 – 200x80 mm Tube weight: Max. 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350 - 400 - 450 mm Tube length at exit: Max. 5.000 mm DEBURRING Rounds diameter: 20 – 102 mm DEBURRING Squares dimensions: 30x30 – 70x70 mm DEBURRING Rectangles dimensions: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz

Condition: like new (used), Year of construction: 2025, functionality: fully functional, A bestseller among bakery equipment – cooling and proofing chamber with stackable tray storage system CTS. The system is an innovative Ice Cool solution, based on adjustable, uniform air movement throughout the chamber via centrally placed tray stacks, eliminating the need for additional suction stations. CTS operates within a temperature range of -10/+15°C, providing optimal conditions for direct dough processing without a shock freezer or suction station. The CTS chamber maintains a climate that does not require additional humidification and protects products from drying out in ambient conditions. The result is healthier products that, after baking, are crispy, have a beautiful shine, and retain long-lasting freshness. Chamber Installation type: CoolProofer Temperature range: -10°C to +15°C Model: CTS 300.320.252/ELRR-2LC47 Insulation value: 0.19 W/m2K Insulation: 100 mm PU sandwich panels External dimensions: 320 cm width x 340 cm length x 272 cm height Internal dimensions: 300 cm width x 320 cm length x 252 cm height Internal walls and ceiling: Stainless steel walls and ceiling Lowered (white, insulated) ceiling with one stainless steel air duct wall External walls: Stainless steel, linen structure, ceiling made from galvanized plate, coated with food-grade paint Floor: 100 mm PU insulation, stainless steel tray construction bonded over the entire load-distribution plate, Doors: 1 x swing door 90 x 200 with modern hygienic magnetic closing system, doors inside and outside in stainless steel Lighting: Energy-efficient LED lighting with integrated automatic switching Technology Compressor: Energy-saving "Bitzer" 5 HP compressor, with high COP (Coefficient of Performance) Noise reduction: NorWep enclosure, noise reduction for compressor, suitable for outdoor installation. Condenser: Extra-large heat exchanger for high ambient temperatures and low energy consumption Evaporator: Type 2xLC47 with aluminum housing, white finish and epoxy coating for acid resistance, equipped with electronic expansion valves Cpodsxb Uyljpfx Agzow Refrigerant: (Low-GWP 146) R-455 Refrigeration installation: 15 m pipework to compressor, 5 m to condenser Control: Large, ultra-modern 12" computer touchscreen control with integrated HACCP data logger and graphical chart display. Includes network functionality and fault alerts via e-mail. Connected load: 8.8 kW, 3x400V+N+PE, 50 Hz. This is the connection load – actual energy consumption is significantly lower.

Condition: used, Unused from new Caldereria Teruel (Spain) Model BSP-31 CT 316L stainless steel vertical inline bag filter. 31 litre volume rated 10 bar maximum working pressure at 150 degc. Approximately 200mm internal diameter X 920mm high. Has 200mm inlet and outlet. Equipment is CE marked. Includes quick release hinged lid. Mounted on (3) stainless steel legs. Includes 12 months warranty. In stock and immediately available. Csdpfx Aoyh Naxegzepw

Condition: new, Year of construction: 2023, TECHNICAL SPECIFICATIONS ZOPO V10-B X-axis travel 1,000 mm Y-axis stroke 620 mm Z-axis travel 630 mm The distance spindle nose to table 120 ~ 750 mm T-channels 5 x 18 T channel distance 100 mm The size of the working area of the table 1,200 x 600 mm Cjdpfx Aeiyyypogzopw Maximum weight per table 800 kg Spindle taper type BT 40 Main axis motor power (30 min./continuous) 15/11 kW Main shaft motor torque S1 - 52,5 Nm / S2 - 95,5 Nm / S3 -118, Nm Main shaft transmission Direct drive Maximum speed of the main shaft 12,000 rpm SPECIFICATION OF X, Y, Z AXES Rapid feed on the X/Y axis 36 m/min Rapid feed on Z-axis 32 m/min Maximum feed X/Y/Z axes 10,000 mm/min X/Y axis motor power (Torque) 3 kW (20 Nm) Z axis motor power (Torque) 3 kW (36 Nm) ATC TOOL SHOP (automatic tool change) Tool magazine type With arm Tool magazine capacity 24 Tool holder type BT 40 Tool change time 2.5 sec. ACCURACY X/Y/Z positioning accuracy ± 0.008 mm X/Y/Z repeatability ± 0.005 mm MACHINE DIMENSIONS Length x width 2,850 x 2,450 mm Height 2,850 mm Weight 6,800 kg ACCESSORIES INCLUDED IN THE PRICE Fanuc 0i-MF controller with 10.4˝ color LCD monitor Main shaft with direct coupling (Direct Drive), motor 11/7.5 kW and maximum speed 12,000 rpm 3 axes controlled simultaneously Linear guides with rollers on the X, Y, Z axes 45mm Tool magazine with arm with 24 positions Cooling unit with tank Oil spindle cooling system Spindle air blowing system Air gun System for separating oil from the coolant (Oil Skimmer) Chip conveyor with chain Closed electrical panel with air conditioning Communication interfaces for programs and data: RS 232 interface, CF card and USB M30 automatic shutdown Transformer Centralized automatic lubrication Rigid tapping Inside machine LED work lamp x2 LED warning lamp in 3 colors MPG (manual pulse generator) mobile remote control with cable Screws and soles for leveling the machine Tool box + tools Operating manuals and spare parts list Telescopic guards for all 3 axes Fully enclosed workspace with self-locking doors CE mark 2 year warranty on control 1 year on machine delivery is free on truck showroom CNC Top Ten bv Denekamp Holland

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Floorplate Width: 1250mm Height: 245mm No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Length: 5990mm Width: 1250mm Height: 245mm Weight: 6000kg Cjdpexdltuofx Agzopw Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, 3 axis CNC Machining Centre HURCO type VM10-24i PLUS CTS Year of construction: July 2024 - AS NEW - less than 100 working hours Travel X: 660 mm Travel Y: 406 mm Travel Z: 508 mm Numerical Command WinMax 5: double touch screen 19'' / Detachable electronic crank / USB ports Spindle: SA40, cooling by thermal fluid Spindle speed: 12 000 RPM Integrated tool coolant (CTS) Table size: 762 x 406 mm - 3 T-slots 18H7 - Loading capacity: 1500 kg Tool changer: 24 positions, automatic electric arm changer Spindle motor: 11,2 kW at 1450 RPM Max couple: 73,6 Nm Cjdpfxeyh Nz Ao Agzepw Rapid advances: 28 m/min. on X, Y and Z Standard Functions: Ultimotion / rigid threading / helical interpolation / trochoidal machining / import STL /WinMax programmation Fanuc ISO + conversational Installed software options: Ultimonitor ESF (supervison Ethernet) Materials and tools Bookcase Files player DXF 2D/3D, SPLINE and STEP

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,361 h, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 410 mm, This 3-axis CHARMILLES ROBOFORM CT 400 was manufactured in 1996. It features X-axis travel of 450 mm, Y-axis travel of 320 mm, and Z-axis travel of 410 mm. The tank dimensions are 1195x800x400 mm, supporting a maximum workpiece weight of 800 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM CT 400 machine we have for sale. Contact us for more information. Cpodpfx Ajx Uzb Ejgzow • Maximum workpiece weight: 800 kg • Tank length: 1195 mm • Tank width: 800 mm • Tank height: 400 mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, Demo machine – digital laser imaging system Phoenix 6580 CtS/CtP with a maximum screen/plate size of 655 x 800 mm for sale. 1270 dpi resolution and 30 watt laser with 405 nm and 4° DMD technology. Vacuum table with PIN system for rotary screens from Gallus, SPG, and Kocher&Beck. Suitable for screens up to 10 mm frame thickness, UV offset plates, magnesium plates, and diazo film. Cpsdpfx Agew T Sfkezow

Condition: new, Custom quotation on request Cjdpfxoyfz T Ue Agzopw

Condition: excellent (used), functionality: fully functional, power: 18.4 kW (25.02 HP), fuel type: diesel, color: yellow, overall weight: 2,867 kg, number of seats: 1, Year of construction: 2021, machine/vehicle number: 2496528, Equipment: cabin, Technical data Year of manufacture: 2021 Engine: 18.4 kW (24 HP) diesel Weight: 2.86 t Dimensions (L x W x H): 4.10 m x 1.55 m x 2.40 m Track width: 250 mm Digging depth: 2.74 m Dumping height: 3.22 m Displacement: 1.49 l Reach: 4.49 m Gradeability: 36% Csdpfx Ajyqzuiogzjpw Travel speed: 2.5 - 4.9 km/h Fully functional

Condition: like new (used), Year of construction: 2022, For sale: EXILE prepress system – complete set: CTS imaging unit and UV LED exposure cabinet. Devices from mid-2022. Printhead replaced in 2025. After that, used very little. Cedexb Ru Eopfx Agzspw 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serial number: 900 100523/182 • Production date: 07/2022 • Version: DTS 30″ • Pin registration: MHM • Included: 1× Screen Drum • New printhead: 2025 2. Exposure cabinet – EXILE V LUX UV LED Exposure Cabinet • Serial number: 450 • Production date: . RIP software • SCREENMAKER RIP Kit (for Windows systems)

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Cpodex Di Rqspfx Agzow Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request Cpjdpfoxan Utjx Agzow - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Cpedpfx Aoxtbf Ejgzjw Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, tempering furnace reconditioned 2022 Cpsdpswinuhjfx Agzew

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, Demomaschine digital laser exposure unit 5060 CtS with maximum screen size of 500 x 600 mm for sale. 2540 dpi resolution, 30 watt laser, vacuum plate with pneumatic screen clamping. Cedpsw T Si Nefx Agzspw

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1737522032, Infinitely height-adjustable and lockable saw head with splash guard. Lateral handwheel feed for convenient operation. Removable water tray, easy to clean. Crane lugs for easy relocation on the construction site. Codpfxow Rnzco Agzopw

Condition: used, Year of construction: 2007, operating hours: 2,000 h, power: 283 kW (384.77 HP), Equipment: air conditioning, cabin, * Engine manufacturer: John Deere Equipment: Cpodpfxjil Hads Agzew Air conditioning, Straw chopper, Cutterbar wagon, Slope compensation, On-board computer / monitor, Throughput control, Yield measurement, Horizontal reel adjustment, Hydrostatic drive, Reversing device, Cutterbar, Loss measurement Shaker with cutterbar JD625R with 7.60 m working width, transport wagon and rapeseed table ENGINE MAKES NOISE.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Cedox Trg Aopfx Agzopw