Used Cross Carriage for sale (9,360)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: Bjdpfx Aovwlqqsbbelr The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Log conveyor. Bljdpsr Ig Dijfx Abbor

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. Bsdsw Nxyyepfx Abbjlr KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Pliers pusher: Bjdpfx Abjixz A Eebelr (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Condition: good (used), Year of construction: 2012, 1 used deburring and edge rounding machine Manufacturer: Loewer Type: Cross Master DD 300 Year of manufacture: 2012 Working width: 300 mm Disc motors: 2×1.5 kW, 750 rpm Disc diameter: 400 mm Bljdsw Imucspfx Abber Workpiece thickness: 0.3 to 100 mm Infinitely variable feed speed: 1 to 6 m/min Infinitely variable speed control (optional): 300-1100 rpm Extraction connection: 150 mm Machine dimensions (LxWxH): 1,600 x 1,800 x 1,700 mm

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm Blsdpfsdc Ipmox Abbor -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: used, Year of construction: 2022, Optimization cross-cut saw Weinig type OptiCut 260 for automatically cutting wood according to defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects. Technical specifications: tba saw blade ø: 500 mm input length: 400 - 6300 mm input thickness: 12 – 80 mm feed: max. 250 m/min cutting height: 260 mm bars: about 1 second saw motor: 7,5 kW marking station: 5.000 mm exit belt: 7,5 m Bedpow Nitqefx Abbolr Control: OptiCom Pro Construction year: 2022

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Bljdpswlaxkefx Abbjr Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Condition: used, Cross table with stepper motor drive Precision positioning systems UHL Cross table UHL type KT5-NSOC Series no. 0008002 Table size: 145 x 145 mm Table opening: 75 x 75 mm Height: 51 mm Bledpfxoflrtpe Abber Travel: 50 mm per axis Straightness / flatness: 5 μm - Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 265 x 220 x 51 mm Weight: 3.5 kg Very good condition

Condition: good (used), Year of construction: 2011, input frequency: 50 Hz, control voltage: 24 V, Automatic cross strapping machine Manufacturer: Mosca Blodpfjwk Nynjx Abbjr Model: SONIXS-TRP Year of manufacture: 2011 Condition: good, see pictures

Condition: used, Year of construction: 1997, machine/vehicle number: 972842, SECOND-HAND SEMIAUTOMATIC CROSS CUTTING SAW TRV 500 - CE RULES - Mobile pressure system Bledpfx Aowr T Rmjbbsr - Right/left feeding - Conveyor belt TSLR 6000X400 - N. 3 unloading tables mm. 1000x1200 - Waste belt conveyor TSS 45° mm. 2500 - Strapping machine SIVARON SS-80 - Year 1997

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 Blodpfx Aodc Ipljbber -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: used, Year of construction: 2004, Automatic optimization cross-cut saw (push-type saw) Dimter type OptiCut 700 for cross-cutting wide timbers according to defects (fluorescent chalk) and lengths. Without vacuum lifter. cutting height: Max. 120 mm Bsdpfx Abew Nhgpebolr cutting width: max. 700 mm input length: max. 5,300 mm

Condition: good (used), Cross chain separator conveyor 2 pieces Chain pairs 7 pieces Conveyor width ca. 5000 mm Working height ca. 1800 mm Fixed cross chain conveyor no 1 length ca 1000 mm Fixed cross chain conveyor no 2 length ca 500 mm Moving cross chain conveyors parts length ca. 500 mm Bledpfx Ajndir Rjbbor Moving the separator parts with a hydraulic cylinders

Condition: used, Cross table with mounted rotary table and stepper motor drive Rotary table, dividing attachment Precision positioning systems UHL Cross table UHL type KT5-NSOC Serial no.: 0008002 Table size: 145 x 145 mm Construction height: 62 mm Travel: 50 mm per axis Straightness/flatness: 5 μm - Drive per axis by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 200 x 200 x 62 mm Very good condition Rotary table UHL type B80 DT as dividing head Serial no.: 00080002 Rotary table: Ø 74 mm Blodjw E Nw Aopfx Abber Construction height: 40 mm - Drive by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (rotary table) L x W x H: 92 x 80 x 40 mm Dimensions with mounted rotary table L x W x H: 200 x 200 x 102 mm Weight: approx. 3 kg Very good condition

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Bledpfx Abexg Hanebjr Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Condition: used, Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage Blsdpfxouu U Uvo Abbor -Manufacturer: THK, 4 pieces guide rails with 8 pieces guide carriages/slides -Guide carriage: Type SR -Rail length: 410/340 mm -Rail width: 23 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 410/100/50 mm -Weight: 6.7 kg

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. Bjdsdzp T Depfx Abbolr All other components and electrical parts for the construction of a new special machine are also available.

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm Blodpfx Abonzpx Rjbjr -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: used, Linear Bearing, Linear Rail, Linear Guide, Roller Guide Rail, Guide Rail, Cross Roller Guide Blsdpelb Iwbofx Abber -Manufacturer: Schneeberger, cross roller guide type 9700 -Hole spacing: 100mm M8 -Quantity: 4 pieces -Price per piece -Dimension: 705/22/H45 mm -Weight: 4.5 kg/pc.

Condition: good (used), Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor, wheel loader mount, adapter frame, universal carrier, fork carrier -Wheel loader mount: fork carrier, solid design -Mounting: Shaft Ø 38/ 51 mm, dimensions see photos -Forks: can be supplied for an additional charge, large selection available Blsdpfx Aotvb D Aobbsr -Dimensions: 1000/170/H670 mm -Own weight: 134 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool slide: Support slide support carrier with turning tool holder -Clamping height: 40 mm Blsdpfx Abswcwizobsr -Dimensions: see photos -Dimensions: 370/180/H170 mm -Weight: 17.8 kg

Condition: good (used), Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, forklift Bjdpfsu Inqfex Abbolr -Fork carriage: with forks -Load capacity: 12,000 kg -Make: Still -Forks: length 1600 mm / 200 x 100 mm -Installation dimensions: see photos -Dimensions total: 3000/2100/H1530 mm -Weight: 2480 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide Bjdpowcw S Nsfx Abbslr -Tool slide: Support slide lower part support carrier -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Condition: good (used), Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm Blodpfx Abeqgi Ihsbjr -Spindle pitch: 10 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg