Used Cross Carriage for sale (6,025)

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm coil weight: 15 t stroke: 600 mm year: unknown / overhauled in 2017 Cjdpfsinupvjx Agzogp

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm Cjdpfx Agjlimrxezsgp coil weight: max. 30 t stroke: 1.000 mm

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm Codslimtcopfx Agzjgp coil weight: 15 t stroke: 600 mm year: unknown / overhauled in 2017

Year of construction: 2018, condition: new, machine/vehicle number: DF0246 Rev0, Tol measurements:2500 x 1800 weight max.:20 t Cjdpsdxvfmofx Agzjgp range L-W-H:1920 x 2818 x 1140 mm :1000 - 2000 mm :700 - 1200 mm Weight:2 t Motor output:2,2 kW :70 mm Tol measurements:2500 x 1800 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Cgsdpfx Agovz Hf Dszep Weight 80 kg Total power requirement 0,75 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x930x1080 mm Weight 390 kg Total power requirement 1,5 kw Cjdpfx Aovz Et Hegzsgp

Condition: excellent (used), functionality: fully functional, Grecon Dimter OptiCut 304R Optimizing Cross-Cut Saw Minimum input wood length: 500 mm with loading onto support table Minimum input wood length: 900 mm with loading via cross chain conveyor Maximum input wood length: 6300 mm Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Maximum wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade rotational speed: 4200 rpm Cgsdpfx Agsx Up Nqozop Maximum feed rate: 230 m/min Cutting modes: - Fixed length cutting - Lumber length optimization for maximum yield - Defect removal with chalk defect marking

Condition: excellent (used), Year of construction: 2009, HOLZMA cross-cutting machine for dividing panel remnants, such as those produced in angular panel saw lines – part of the automatic waste disposal system at panel dividing plants. Cgodpfoyay Igsx Agzep TYPE HRZ 540 Year: 2009 Machine No.: 0249083537 For trimming off-cuts and remnant cuts at an angular system. The off-cuts and remnant strips are conveyed directly from the shaker chute of the longitudinal saw into the cross-cutting machine, where they are cut down to approx. 200 – 400 mm. Trimming is performed by a hydraulically operated cutting blade. Head and edge trimmings drop down through the waste flap into a shaker chute below. This chute conveys the remnants to a shredder (cross-cutting machine). From there, the shredded waste is transported, e.g. via a waste conveyor belt, into a scrap container.

Condition: used, Multisaw cross feeder Cgedonwnpqjpfx Agzjp

Condition: used, Transport 350 EUR Csdpfx Agowna Rxozogp

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrical system new Siemens S7 control Completion upon order Cross-cut saw with chalk line detection Wood cross-sections 430x30 / 300x150 / 200x200 mm DIMTER OptiCut 602 R Cgsdpfov Diy Ajx Agzep Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter

Condition: good (used), Year of construction: 1999, machine/vehicle number: 89257, GreCon Dimter Opticut 704 L saw from 1999. Machine dismantled from a functioning production line. Codpstvahljfx Agzegp No output ejectors; the machine requires reintegration or retrofitting. Available for inspection at our premises.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material Cgedpsvwlqqofx Agzsp 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Cgsdpfx Aex Au A Nsgzep Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Cgodpfx Aowlaxkogzsp Type: ES120 Year of manufacture: 1995

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 4,500 kg, empty load weight: 92 kg, construction width: 1,400 mm, Fork carriage Cjdpfx Aeu D S Iysgzjgp Load center of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Description: Quick-change frame with fork carriage plate 1400mm/ FEM3

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Cjdpfx Agsxztydezogp Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: used, Year of construction: 1999, functionality: fully functional, Crosscut saw, miter saw OMS FC 300 RAP 2.2 kW – after technical inspection Specification: • Technical condition – used, after inspection • Manufacturer – OMS • Model – FC 300 RAP • Blade diameter – 300 mm Cgodpfx Ajyg R Spjgzop • Saw motor – 2.2 kW • Max. dimensions of workpiece at right angle: 95 x 125 mm (height x width) • Saw blade guards for operator safety • Extraction port – diameter 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect accuracy at extreme angles) • Year of manufacture – 1999 • CE marking • Overall dimensions without tables: 75 x 75 x 70 cm (L x W x H) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and inspect the machine on site • The price listed in the auction does not include VAT or transportation costs Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financial support available in the form of leasing or lease loans

Condition: good (used), Year of construction: 2005, saw blade diameter: 800 mm, overall weight: 2,960 kg, 15 kW; 400 V; Cgjdpfxoygk Hao Agzsp

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 600 mm, working height: 900 mm, saw drive: 7,500 W, Mitre saw adjustable to 45° equipped with 6-meter pusher discharge deck with 6-strand loading chains for faster loading machine overhauled and fitted with a new digital touchscreen Cgjdpfxjwzg E Ns Agzep

Condition: refurbished (used), Cross Rail Milling Machine Rsc Tccgsx Rdw Ioxasck Manufacturer: Stegherr Type: KSF Designed for milling cross rail joints, e.g. in windows, doors, and furniture. Equipped with 3 milling units: One upper and one lower milling unit perform parallel milling operations similar to angled cuts, while the third unit simultaneously performs flush milling. The machine table moves pneumatically-hydraulically. Csdpex Rhwlofx Agzegp Proc Tccjw Imhcogxaef Feed and return speeds are adjustable. Foot-operated control. 2 motors, each with a power of approx. 2.2 kW Total power consumption approx. 4.5 kW Compressed air pressure: 6 bar Voltage: 380 V 50 Hz Suction connection diameter: 180 mm

Condition: ready for operation (used), Year of construction: 1969, functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke length: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Cedpfx Aswcn H Regzogp Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm Codpfxeupw Twe Agzogp T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Cross table with turntable

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm table height 160 mm T-slots 12 mm weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Cjdpfjupw T Rox Agzegp Cross table with turntable

Condition: excellent (used), Year of construction: 1988, I sell the cross veneer guillotine Josting QFS 800. Year 1988 (2pcs. available on stock). Cutting length 800mm. Csdpjyc Nilsfx Agzjgp Cutting height 60mm. Very good condition. Available immediately.