Used Crank for sale (556)

Condition: new, functionality: fully functional, machine/vehicle number: NEW-10, empty load weight: 535 kg, maximum load weight: 1,465 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2000 2 Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 150cm Side board height: 30cm Loading platform height: 66cm Total weight: 2000kg Blodpsghpcpefx Afmsp Payload: 1465kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT 2 axles with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 48 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Side board height increased to 35cm -Black Edition (Powder-coated side boards and rims in black) -Ramps -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on a tipped vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side boards 30cm with tensioning closure -Flat sheet with or without frame -High sheet 160cm or 180cm Further accessories available on request! Plus freight to Gera and vehicle registration document 200 € net Images are for illustrative purposes only and may show optional accessories that incur additional costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Visit us online or come directly!

Condition: new, Roller conveyor with length stop. Configurable in various lengths and widths. Optionally available with driven rollers, lateral pusher, material slide, roller conveyor with weighing system, etc. Length stop can be adjusted manually, using a hand crank, or with a motor. Position can be read on a digital display. Bsdod A Ufbspfx Afmjlp Stop can be fixed or foldable. Please specify the desired length, roller width/material, and height when making inquiries.

Condition: used, Material clamp, material gripper, load clamp Bodpfxodz Spno Afmelp Lifting clamp, hoisting clamp, block grab Manufacturer: NORDGREIF, Type 7548 Year of manufacture: 1997 Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE marking Weight: 50 kg good condition

Condition: new, pressure: 65bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 5500motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Bledpfx Afed Etfxsmjp

Condition: new, pressure: 150bending length: 3050column width: 3050daylight: 590stroke lenght (max.): 300messurements (LxWxH): 4740x2000x2680weight approx.: 9500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Bljdpfx Aod Etf Eofmep

Year of construction: 1990, condition: good (used), machine/vehicle number: 0125749, Technical data: Blodjd Ingfepfx Afmjp - Drilling capacity approx. 30 mm - Drill spindle mount MK 3 - Drill spindle speeds in 2 stages, stepless 80 - 1400 rpm - Table surface 390 x 420 mm - Drilling unit height-adjustable by hand crank - Min. / max. distance table / drill spindle 220 / 580 mm - Drill spindle stroke 150 mm - Drill spindle overhang 280 mm - Drive 400 V / 1.3 / 2.3 kW - Space requirement approx. W 480 x H 880 - H 1200 x D 1050 mm - Weight approx. 250 kg - Table base with storage space W 600 x H 910 x D 800 mm - Weight 200 kg

Condition: new, empty load weight: 560 kg, maximum load weight: 440 kg, overall weight: 1,000 kg, loading space length: 2,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 155r13c, Highly visible sales trailer for snacks or goods. Our* snack trailers* are manufactured in an insulated sandwich construction. A very stable frame, welded and hot-dip galvanized, provides the basic stability. The flaps and doors have a welded frame so that the sales box is permanently stable. A proper personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich case body has a galvanized sheet steel outer skin which is also powder-coated. The insulation is a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The *snack van* is supported by 4 crank supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *food*, *beverages*, *fast food*, *low food*, *non-food,* * *street food*, *sales goods* and much more. The standard equipment of the sales trailer at a glance: *entry door lockable with personal lock*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, four stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. As accessories for our *sales trolleys* we offer further *sales flaps*, *tarp triangles*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, PVC on floor, *100km/h shock absorber* and *anti-theft device*. Blodpfx Afopfcpfsmsp

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Clamping tool: cranked clamps, 3 pieces -Clamping iron: 188/60/H55 mm -Groove: 89 x 23 mm -Price/Delivery: complete Bjdpfxsuza Rkj Afmjlp -Transport dimensions: 188/180/H55 mm -Total weight: 5.7 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 17,5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Recessed rail for loading ramps on the rear extension over the entire width, outer edge beveled to prevent damage. Reinforced frame for vehicle loading Outer frame with load-lock profile approx. every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed on the top/outside of the outer frame, each 10 tons, starting after the neck area 24-ton, 2-speed support jacks, single-sided operation, with a flat mounting plate 2 wheel chocks with holder Aluminum side impact protection Galvanized steel underride protection Sheet metal as a splash guard riveted to the bottom, in the neck area above the center of the bogie axle and above the axle assembly Semi-elliptical fenders with anti-spray flaps according to EC Container locking system, 4 pairs of locking recesses recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters (additional cross supports required at the front and rear of the container; the container must rest evenly across its width in conjunction with the locks; cross supports are not included) Attention! Damage to the platform floor is possible due to the cross supports! Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, including extendable underride protection with lighting (then the rear ladder is omitted) Covered with platform in the wheel arch area, with steel diamond plate in the center. Attention! Ramp loading at the rear is only possible with the rear extension in the retracted position! Storage space for loading ramps integrated in the rear extension, only usable when the rear extension is extended 1000 mm – then there is an overhang For transporting the ramps with the rear extension retracted, there is storage space for the ramps on the right side of the frame in front of the axles 1 pair of ramps, 3000 mm long, 300 mm wide, load capacity per pair 6000 kg (recessed rail for ramps on the rear extension) Rear slope to approx. 500 mm Electric winch, 24 volts, pulling force approx. 8165 kg, mounted in the center at the front, operated with a wireless remote control, cable length 35 m x approx. 10 mm, with a cable guide and removable guide rollers Axles + Suspension Drum brake axles Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension Bedpfxolf Dtme Afmjlp 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance functions up to an axle load exceedance of 30% and a speed of max. 25 km/h) with central lift arm Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system 2-line pneumatic braking system Color-coded lines for easy service. Spring parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Wheels and tires 235/75 17.5, manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 additional LED work lights at the rear, switched via the revers

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Bledpfeuuh Suex Afmop Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Height: 25 cm

Condition: used, mileage: 567,086 km, power: 235 kW (319.51 HP), first registration: 07/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, emission class: euro4, Equipment: ABS, Tel.: Call (Contact · Phone · Mobile · WhatsApp) Special Equipment: Tow hitch: Rockinger 400 G 150 A, Car phone antenna, Mechanical battery disconnect switch, Operating hour counter, Comfortshift transmission, Rear axle differential lock, Air horns on cab roof (2), Cab: Electro-hydraulic tilting mechanism, Cab: with 2 tinted rear windows, Flame start system, Tinted windshield, Tipper lever – brake system regulated by EVBec, Tinted side windows, Seat upholstery: comfort quality, Exterior sun visor, 24V dual-plug cab socket, 3-piece steel bumper, Tinted door glasses, Front underrun protection, Viscous fan Additional Equipment: Axle configuration: 4x2, Front axle load 8.0 t, Start-up/front mirror, 24V / 7-pin trailer socket, ABS trailer socket, Anti-Slip Regulation (ASR), Electrically adjustable and heated exterior mirrors, Wide-angle and electrically adjustable/heated exterior mirror (right), 175 Ah battery, Battery box, MAN-Tronic on-board computer, Right curb mirror, MAN-Brakematic electronic brake system, EURO 4 engine, Cab: M (medium length), Comfort driver’s seat, Tachograph, Suspension: leaf/air, Electric window regulators, 28 V 80 A alternator, Speed limiter system 80/85 km/h, 16-speed gearbox – type: ZF 16 S, Rear axle HY-1350, Interior pollen filter, Body/structure: chassis, Heated fuel filter, Adjustable steering column/wheel, Headlight range adjustment, 2-cylinder air compressor, Engine 10.5 L – 235 kW diesel, Radio pre-wiring 24V, Rear axle disc brake, Front axle disc brake, Side underrun protection, Front axle stabilizer, Tow hitch cross member, Rear underrun protection, Cranked front axle VOK-08, Electronic immobilizer, Central locking, Permissible gross weight 18.00 t Bodeta I Siepfx Afmslp * VIN: WMAH06ZZ67M484009 * First registration: 19.07.2007 * Price net * All information without guarantee

Condition: used, thickness of jaw 250 mm height of jaw 80 mm Bledpfx Aotqqphjfmep clamping width 340 mm = hydr. machine vice (pos.2) - with hand crank and 3 clamping shoes -

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Bodpfjty A Ehjx Afmelp Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: good (used), electric clutch, electromagnetic clutch for guillotine shear, sheet metal shear, sheet metal guillotine shear, crank guillotine shear, eccentric press -for: Crank-operated guillotine shears -Equipment: Coupling, transformer, control unit -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 Bledpfx Aob A I Uiefmop -Total net weight: 160 kg

Condition: new, overall weight: 1,300 kg, empty load weight: 1,140 kg, maximum load weight: 160 kg, loading space length: 4,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165R13C, Car trailer as a construction trailer for 8 people with toilet and storage room. The insulated recreation trailer is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. A heater provides support in very cold weather. The use of a crew trailer is possible on almost any construction site. As a normal car trailer, it can be driven to the construction site by a simple car. These vehicles are also operated as Burö trailers. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, toilet room with chemical toilet and sink, storage room with shelf, stairs and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Bodpfx Afsrx Sn Tomelp Accessories for construction trailers include a toilet with drainage via a sewer, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: new, overall weight: 1,300 kg, empty load weight: 1,100 kg, maximum load weight: 200 kg, loading space length: 3,130 mm, loading space width: 2,167 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 4 people with toilet and storage. An insulated *team trailer* is suitable for all seasons. With a sandwich construction in 50 mm and 60 mm insulated floor, it can withstand heat and cold. In winter, the built-in heating provides support. To ensure that the replacement trailer is as self-sufficient as possible, it has a small built-in WC with chemical toilet. Blodpfx Aeqwi E Iofmop The recreation trailer can be used on any construction site. It can easily be towed to the construction site with a car as a *car trailer* and can also be used as a *burro trailer*. The standard equipment of the construction trailer includes an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, ISO floor in 60mm, PVC aud floor, chemical toilet in a small toilet room with washbasin, storage room with outside door and shelf, refrigerator, coffee machine, window with safety cover, 230V fuse box with RCD, sockets, switch and interior light, table and chairs for 4, shelf, coat hooks, four sturdy crank supports, power socket for 230V, connection cable, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet with drain, other sizes for up to 16 people, 100 km/h shock absorber and trailer lock.

Condition: new, empty load weight: 700 kg, maximum load weight: 600 kg, overall weight: 1,300 kg, loading space length: 3,570 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a platform trailer for food service or merchandise. Our food service trailers from the SELLERH series are manufactured with an insulated sandwich panel construction. The robust steel frame is welded and hot-dip galvanized, ensuring high stability. A lockable steel door, not made of plastic, is installed in the door. The trailer body is made of 25mm polyester sandwich panels in white. The car trailer has four crank supports for lifting the food service trailer. So, it’s an affordable car trailer for the market, food service, cocktails, fast food, non-food items, street food, merchandise, and much more. Our standard equipment for the sales trailer at a glance: Entrance door with lockable steel door, step on the drawbar, sales hatch on the right with lifting aids, lockable from the inside, electrical distribution, sturdy crank supports, 25mm sandwich panel construction, white exterior, maneuvering handles, support wheel with holder, sturdy welded frame, and a very stable V-shaped drawbar, hot-dip galvanized. As accessories for our sales trailers, we offer additional hatches, tarpaulins, pocket shelves, sales counters, cabinets, sinks, PVC flooring, 100 km/h shock absorbers, and trailer locks. --- You can also find all our cost-effective offers on our website. Blsdpeg Ttg Aofx Afmop Germany-wide delivery possible (except for islands)! Please feel free to ask us about the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - [Time] No pick-up possible on Saturdays!

Year of construction: 2026, condition: new, The manual length stop with hand wheel and electronic dimension display MD 50 h is ideal for frequently changing section lengths and for stopping long materials. A hand crank enables the carriage to be moved quickly and precisely. Bsdpfxeidln Ts Afmolp

Year of construction: 2026, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power • digital actual length display in the working area Bsdpfx Asidmp Tsfmolp • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connection value: 380V, 4kW Table size: 1070 x 620 mm Swivels with hand crank, 45° Height adjustment with hand crank Right/left rotation Bljdeiinm Hepfx Afmjp Motor brake Socket for feed device Protective covers for handheld routers Spindle diameter: 30 mm Aigner stop Dust extraction connection: 2x 120 mm Speeds: 1400/3500/6000/8000 RPM Operating manual

Condition: new, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Robust and high-quality sales trailer as a flatbed trailer for food service or merchandise. Our food service trailers from the *SELLERH* series are manufactured with an insulated sandwich panel construction. The sturdy steel frame is welded and hot-dip galvanized, ensuring high stability. A lockable steel door, *not made of plastic*, is installed in the door. The *trailer body* is made of 25mm polyester sandwich panels in white. This *car trailer* has four crank supports for lifting the *food truck*. Therefore, it is an affordable *car trailer* for the *market*, *food service*, *cocktails*, *fast food*, *non-food items*, *street food*, *merchandise*, and much more. Blodpfoi E N Stox Afmop Here is an overview of the standard equipment of our sales trailer: *Entrance door with lockable pedestrian door*, *step on the drawbar*, *sales flap on the right* with lifting aids, lockable from the inside, electrical distribution, sturdy *crank supports*, *sandwich panel construction* 25mm, white exterior, maneuvering handles, support wheel with holder, sturdy *welded frame*, and a very sturdy V-shaped drawbar, hot-dip galvanized. As accessories for our *sales vehicles*, we offer additional *flaps*, *tarpaulins*, *pocket shelves*, sales counters, cabinets, sinks, *PVC flooring*, *100 km/h shock absorbers*, and *trailer locks*.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. Bsdpev S Sr Refx Afmolp The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: good (used), functionality: fully functional, overall weight: 135 kg, total height: 250 mm, total length: 900 mm, total width: 400 mm, -KOM 694- This hydraulic power vice features a 360-degree rotating base and a vertical crank. Technical specifications: Jaw width: approx. 200 mm Blodpewf Nc Sofx Afmop Jaw height: approx. 65 mm Opening stroke: approx. 355 mm Dimensions: approx. (900 mm x 400 mm x 250 mm) Weight: approx. 135 kg

Condition: used, mileage: 477,163 km, power: 176 kW (239.29 HP), first registration: 12/2006, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro4, Equipment: ABS, Tel.: Call (Contact · Telephone · Mobile · WhatsApp) Special equipment: Tow coupling Ringfeder 6441, rear crossmember, car phone antenna, audio system: MAN CD radio 24V, electrically adjustable and heated exterior mirrors, wide-angle exterior mirrors electrically adjustable and heated, left, wide-angle exterior mirrors electrically adjustable and heated, right, battery 140 Ah, mechanical battery master switch, kerb mirror left electrically adjustable and heated, kerb mirror right electrically adjustable and heated, rear axle differential lock, entrance lighting driver's/passenger's side, driver's seat comfort, air suspended, electric window regulators, flame start system, tinted windscreen, mechanical lifting roof, rocker - brake EVB, fuel tank: 200 L, reading lights for driver and passenger, raised air intake, dry air filter right below, seat upholstery: comfort quality, exterior sun visor, tinted door windows, central locking Additional equipment: Axle configuration: 4x2, on-board computer MAN-Tronic, compressed air connection front, electronic brake system MAN-Brakematic, EURO 4 engine, cab: C (Compact), suspension: leaf/air, generator 28 V 80 A, gearbox type: Eaton 8309, rear axle HY-0925, body/chassis: chassis, heated fuel filter, adjustable steering column (steering wheel), engine 6.9 l - 176 kW Diesel, engine brake, spare wheel carrier behind rear axle, disc brake rear axle, disc brake front axle, rear axle stabilizer, plastic bumper, underride protection rear, underride protection front, viscous fan, front axle VOK-05 cranked, permissible gross vehicle weight 11.99 t * MAN TGL 12.240 4x2 BL * Refrigerated box fresh service Bjdpfx Afovrnryjmjlp * Thermoking unit * Engine and electrics running * Tail lift with safety lock * Euro 4 * Automatic transmission * VIN: WMAN14ZZX7Y180436 * Year of manufacture: 07.12.2006

Condition: new, Year of construction: 2026, functionality: fully functional, Edge grinding machine KSO 150 F PRO – NEW Scope of delivery: Grinding belt K 100, 5 x rubber rollers ø25, ø30, ø40, ø45, ø50 mm, 6 x grinding sleeves K80 ø25, ø30, ø35, ø40, ø45, ø50 mm, On-board tool, Miter stop Grinding unit can be swiveled manually using a hand crank, Machine stand made of welded steel, Bsdjyxqtfopfx Afmelp Oscillating grinding belt with separate gear motor, Oscillation can be switched on or off, Grinding platen with graphite coating, Height-adjustable grinding table, Additional table with dust extraction openings, Grinding sleeve attachment with attached work table, Adjustable stops 2 pcs. dust extraction nozzles ø100 mm, Size of work table: 950 x 450 mm, height adjustment 110 mm, 400 V, motor power 2.2 kW, oscillation motor 0.11 kW, Grinding belt length 2640 mm, width 150 mm, Belt running speed 14 m/s, Grinding area length 800 mm, width 150 mm, Oscillation stroke 15 mm, Swivel angle of grinding unit 0-45° Machine size 1750 x 1050 x 1200 mm, Weight 310 kg NEW PRICE, MSRP 11,050 € Available for immediate delivery Transport possible for an extra charge!