Used Crank for sale (550)

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, loading space volume: 34 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 34 Code L4BH, for chemicals First registration 05/2023 German registration, from first owner Ø Unladen weight approx. 7,580 kg Ø Stainless steel chassis, highly polished Ø BPW axles with large disc brakes, 430 mm Ø 1st axle: LIFT AXLE Ø Crank-operated support legs, steel, for full load Ø 6 tires, size 385/65 R 22.5 Ø Aluminum rims ALCOA Dura-Bright, high-gloss Ø WABCO trailer EBS with RSS anti-roll protection Ø Tank: 34,000 liters, stainless steel 1.4571 AISI 316 Ti Ø Operating pressure: 3.0 bar / Test pressure: 4.0 bar Ø Insulation: 100 mm glass wool Ø 1 compartment with 4 bulkheads Ø 5 manholes, 3x DN500 and 2x DN350 Ø 1 vent valve, Fort Vale Ø 1 safety valve Ø 1 check valve Ø Air line on the right side, DN 50, with TW 50 connection at the front right Ø Heating preparation, 4-channel hot water Ø 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling Hjdpfxjx Rtafo Akiow Ø 1 purge device Ø Pneumatic bottom valve Ø Hoses on the left and right, DN 150, approx. 6 m long RENTING is the new BUYING, also available with us in a full-service rental arrangement.

Condition: used, Year of construction: 1982, machine/vehicle number: 005-5216, Lg.No. 24586 Hjdpfxev Hc A Ne Akiow Technical data: - max. working width 1030 mm - max. material thickness 3 mm - bending angle approx. 0 - 135 ° - lockable with end stop - upper beam is operated with a hand crank on the side - max. upper beam stroke 120 mm - max. bending beam adjustment 45 mm - bending process is supported by eccentric weight - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-25, empty load weight: 886 kg, maximum load weight: 2,614 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,560 mm, loading space width: 1,840 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 356 184 3500 2E with electric operation and integrated aluminum loading ramps NEW VEHICLE Internal dimensions: 356cm x 184cm Side panel height: 35cm Loading platform height: 75cm Total weight: 3500Kg Payload: 2614Kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED marker lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tilting angle of 41 degrees to the rear Lateral tilting by repositioning the safety pins Electric tilting operation with connector for charging the 12V battery Electric limitation of the tilting angle to the side U-rail for attaching the original SARIS loading ramp Integrated aluminum loading ramps 2800Kg OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -Extended tilting angle to 52 degrees (5-stage cylinder) -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without a bar -High cover 180cm or 200cm Further accessories on request! Plus freight to Gera and vehicle registration document 250 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Haven't you found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, including for caravans. Hsdpfx Aezv T Uqekisw In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a wide selection of rental trailers with us. Visit us online or come directly!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 726 kg, maximum load weight: 1,974 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 – Three-sided tipper with electric tipping system NEW VEHICLE Hedpfjzu Sgvox Akiew Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Electric tipping system 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backward Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -35cm side panels -Battery charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bars -High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration document €250 net Pictures are examples and may show optional accessories that incur additional costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come directly to us!

Condition: new, functionality: fully functional, empty load weight: 851 kg, maximum load weight: 2,649 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 6,040 mm, loading space width: 2,150 mm, tire size: 195 / 50 R 13C, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Unideck Plus 600/3 S 3.5T NEW VEHICLE Internal dimensions: 604cm x 215cm Total weight: 3500kg Payload: 2649kg Braked 3-axle trailer Overrun brake and handbrake from KNOTT or AL-KO 3x 1350kg axles and brakes with automatic reverse function Suitable for transporting longer vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail shaft Numerous lashing eyes along the entire length Reinforced 13" C tires with steel valve M+S tires 13-pin connector Side marker lights at the front Side marker lights Rear lights with reversing light, NSL (non-sequential turn signals), and triangular reflectors Cable winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING IN FEBRUARY 2026 -Equipment for 100 km/h (shock absorbers) -Spare wheel with holder -Complete LED lighting -Theft protection Hsdpfx Aszvcb Hokiow -Replacement of steel rail with aluminum rail -Wheel stops -Folding crank rear supports -Anti-sway coupling -Filling of the center strip with screen-printed wood or aluminum tread plate Further accessories available upon request! Plus freight to Gera and vehicle registration certificate: €315 net Images are for illustrative purposes and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravan trailers. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!

Condition: new, maximum load weight: 42,900 kg, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 29,000 mm, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. LOADING PLATFORM: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform with double-extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock) * Technical fifth wheel load: 25,000 kg for tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced steered hydro-mechanically, mounted on turntables * Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve * 275/70 R 22.5 3PMSF twin tyres. Brand of our choice * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Hsdpfx Akeyvnd Neisw * 3 kW electro-hydraulic unit for hydraulic operations * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * At the king pin 1 pair of lashing rings (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets integrated in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket bar mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets integrated in the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings lying in the outer frame of the loading platform, foldable outward * Rear and front steering operable via cable remote control, with single-track axle control, no installation in the tractor unit required * Last axle with air suspension venting activated when the parking brake is applied * Steel front wall, approx. 1,600 mm high, certified according to EN 12642: 2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing gear, wired to the tractor unit connection * Wooden floor approx. 32 mm thick on the gooseneck and loading platform * At the extension tube with large cross-section, one locking position every approx. 500 mm * At the extension tube with small cross-section, one locking position every approx. 1,000 mm, allowing for locking every approx. 500 mm * Cut-outs in the outer frame of the loading platform for hooking lashing straps (LC 2,500 daN) * 4 crosswise stake pocket bars mounted in the loading platform floor, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with automatic lift axle function as well as starting...

Condition: ready for operation (used), Year of construction: 1979, machine/vehicle number: 20945, Drill diameter: 28/35 mm Spindle mount: MK 3 Overhang: 293 mm Table size: 400 x 400 mm Table can be swiveled on a round column and its height can be adjusted using a hand crank and rack and pinion mechanism. Large distance between table and drill chuck: 630 mm Hjdezh H I Uspfx Akiew Chuck travel: 180 mm Spindle speeds, infinitely adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space required: 600 x 920 x 1880 mm

Condition: new, functionality: fully functional, empty load weight: 369 kg, maximum load weight: 1,131 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 401 mm, loading space width: 1,840 mm, Year of construction: 2026, MARTZ Unilader 400 C 1.5T NEW VEHICLE Internal dimensions: 401cm x 184cm Total weight: 1300 Kg Payload: 1131 Kg Braked single-axle low-loader 1500 Kg KNOTT axle with overrun brake, reversing aid, and parking brake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support Hedpfezkrmhjx Akiow 15mm thick, robust and non-slip screen-printed plywood floor 13-pin electrical system Plastic mudguards Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light and triangular reflectors Foldable license plate holder 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Aluminum side panels - Drive-over tailgate - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Coarse or fine mesh net - Spare wheel with holder More accessories available upon request! Images are for illustrative purposes and may show accessories that are subject to an additional charge. Plus vehicle registration document and freight to Gera: €150 net Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. Wide range of rental trailers available. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to us.

Condition: new, functionality: fully functional, empty load weight: 379 kg, maximum load weight: 1,451 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 3,530 mm, loading space width: 1,840 mm, Year of construction: 2026, MARTZ Low-bed Trailer 350, 1.8T NEW VEHICLE Internal dimensions: 353cm x 184cm Total weight: 1800 kg Payload: 1421 kg Braked, single-axle low-bed trailer 1800 kg AL-KO axle with overrun brake, automatic reversing function and parking brake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support 15mm thick, robust and non-slip screen-printed plywood floor 13-pole electrical system Hsdpfeztc Hwox Akisw Plastic mudguards Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light, NSL (no-stopping light) and triangular reflectors 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Coarse or fine mesh net - Spare wheel with bracket Further accessories available on request! Images are for illustrative purposes only and may show optional accessories that incur an extra charge. Plus vehicle registration document and freight to Gera: €175 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to our location.

Condition: ready for operation (used), Bench drill / ALZMETALL AB 40 ST -Drilling capacity in steel approx. 50mm -Threading capacity max. M30 -Tool holder MK 4 Hjdpfozm Tb Esx Akiew -Spindle stroke approx. 160mm -Automatic feed rate 0.1-0.2-0.3-0.4mm/rev -Overhang approx. 300mm -Continuously variable speed adjustment (variator) -Right/left rotation -Height-adjustable work table via hand crank -Work table size approx. 740x460mm -Motor power approx. 3 kW Dimensions: L x W x H 1.2 x 0.8 x 2.2 meters / Weight approx. 1200 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, working width: 4,200 mm, bending angle (max.): 150 °, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, total length: 4,500 mm, Hey professionals, we know that you are always looking for the best and most powerful tool. That's why we have the ultimate solution for you: the Prod-Masz electric bending machine RED-4200/0.8/160* with recess! With our bending machine, which is equipped with an advanced electronic control system, precision and ease of use become standard. Now, a push of a button starts the bending process and guarantees flawless results without unnecessary effort. Magnets attached to the bending beam ensure a stable position of the sheet and enable precise dimensional adjustment, which is the key to perfect shapes. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. ✔️ Maximum working length: 4200 mm ✔️ Bending capacity: up to 0.8 mm (steel sheet) ✔️ Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.2 mm, copper sheet: 1.25 mm ✔️ Bending angle of the bending machine: max. 160 degrees ✔️ Bending beam thickness: 18 mm ✔️ Cutting with the roller shears across the entire working width ✔️ Raising the upper beam in three positions ✔️ Upper beam stroke: 80 mm Seize this unique opportunity and improve your workshop with the best folding machine on the market! Trust the manufacturer who has been the industry leader in metalworking for years. -> The roller shears (max. cutting capacity 0.8 mm / steel) plus 350 euros -> a hand folding machine plus 75 euros Hodebnq U Tepfx Akiow Additional equipment: - Stop with scale - Quick adjustment via hand crank plus 1250 euros Delivery date: every week Monday/Tuesday We look forward to hearing from you! -> We issue invoices

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Hedpfxofnabyo Akisw Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: new, empty load weight: 640 kg, maximum load weight: 660 kg, overall weight: 1,300 kg, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Stable and high-quality sales trailer as a platform trailer for food or merchandise. Our food trailers from the *SELLERH* series are manufactured with an insulated sandwich panel structure. The robust steel frame is welded and hot-dip galvanized, which ensures high stability. A lockable steel door, *not made of plastic*, is installed in the door. The *body* is made of 25 mm polyester sandwich panels in white. The *car trailer* has four crank supports for lifting the *food truck*. Thus, it is an affordable *car trailer* for the *market*, *food stall*, *cocktails*, *fast food*, *non-food items*, *street food*, *merchandise*, and much more. Here is an overview of the standard equipment of our sales trailer: *Entrance door with lockable pedestrian door*, *step on the drawbar*, *sales flap on the right* with lifting aids, lockable from the inside, electrical distribution, robust *crank supports*, *sandwich panel structure* 25 mm, white exterior, maneuvering handles, support wheel with holder, robust *welded frame*, and a very stable V-shaped drawbar, hot-dip galvanized. As accessories for our *sales vehicles*, we offer additional *flaps*, *tarpaulins*, *pocket shelves*, sales counters, cabinets, sinks, *PVC flooring*, *100 km/h shock absorbers*, and *trailer lock*. Hedpfxeiigb Uj Akisw --- You can find all our cost-effective offers on our website. Germany-wide delivery possible (except for islands)! Please feel free to ask us for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Collection times: Monday - Friday – [Time] Collection is not possible on Saturdays!

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit Hedsvcuddopfx Akijw * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: excellent (used), functionality: fully functional, The AERA blue-cord slicer optimizes industrial preparation with efficiency. Designed for fast, accurate cutting, it uses multiple ribbon slicers to guarantee uniform results. In addition, the trim conveyor handles products before cutting, while the blue-cord folder shapes each product perfectly. With its pneumatic control system and belt scrapers, the slicer ensures high performance. What's more, the titanium cutting carriage, equipped with automatic lubrication, reduces maintenance requirements. In conclusion, the AERA model improves both quality and production efficiency, while complying with industrial requirements. COMPOSITION : FILLING CONVEYOR Overall dimensions (L x W x H): 6400 x 1000 x 970mm. Weight: 970 Kg Sliding surface height: 960 +/- 50mm. Stainless steel tubular legs and jacks Synchronous belt width 600mm. Lyre-shaped winding Pneumatically-operated belt quick-release system Servo-motor control with positioning register. Belt scrapers TRANCHEUR Overall dimensions (L x W x H): 1880 x 1030 x 2460mm Weight: 1000 Kg Stainless steel frame: 20 mm Stainless steel panel housing with magnetic safety sensor and pneumatic locking during operation. Hsdpfeu Ivcisx Akiow Components : The slicer is equipped with 4 magazines consisting of : 4 synchronous pinned belt conveyors controlled by a servomotor 4 chutes defined according to the products to be sliced pneumatic control of chute release from loading belts CUTTING CARRIAGE Cutting is performed by a ribbon blade on 2 titanium 200 flywheels mounted on a titanium crosspiece The cutting carriage is guided by "Hepco inox" rails and rollers The cutting motion is driven by a Sew Usocome servo-reducer, a through shaft and two connecting rod-crank systems. The flywheels are driven by a Sew Usocome geared motor equipped with a transmission shaft and an expanding pulley for constant V-belt tension. A torque-limiting tensioning system enables correct adjustment of the tension on the ribbon blade. Cutting blade lubrication is provided by an automatic gun fed by a low-pressure water network. INFEED CONVEYOR : Slabs are received and distributed by a two-ply polyurethane belt conveyor driven by a Sew Usocome servo-reducer. Product deposited by a 16 mm diameter saber at the end of the conveyor. Quick belt release system. Open-worked bottom for easy cleaning. Conveyor made entirely of stainless steel.

Condition: new, empty load weight: 2,050 kg, maximum load weight: 650 kg, overall weight: 2,700 kg, loading space length: 5,600 mm, loading space width: 2,170 mm, loading space height: 2,100 mm, tire size: 195/55R10C, Large toilet trailer with aesthetic furnishings. A toilet trailer is often essential for a party, town festival, street party, company celebration or other outdoor event. We have set ourselves the task of helping here and have developed inexpensive car trailers with toilets. Hodpsuh Rzqofx Akisw A visually appealing interior design is important to us for a toilet trailer in addition to good equipment. The car trailer is divided into two rooms for men and women. The lighting, heating and flow heater are operated via the power connection. Wall-mounted toilets with built-in cisterns and concealed pipes create a pleasant ambience. There is a fresh water supply and the gray water disposal runs via a sewer. The entrance to the portable toilet is a wide staircase that can be folded down and has lifting aids. The rest of the side wall is then folded upwards as weather protection. Swing-out handrails provide safety. Two entrance doors protect against wind and weather. The staircase is illuminated with an LED strip. The standard equipment in the ladies' area consists of three lockable cubicles with wall-hung toilet bowls, built-in cistern and toilet roll holder. The actual room has a heater, drain for internal cleaning, PVC on the floor, washbasin with vanity unit and instantaneous water heater, mirror, LED lighting, roof vent with mosquito net and blackout blind, light switch and socket. There is only one cabin in the men's area, which is equipped in the same way as the cabin on the ladies' side. The basic equipment is also the same. There are also four wall-mounted urinals with touchless sensors. The general equipment of the box trailer with toilet equipment is a 50mm insulated sandwich body in silver on the outside, white on the inside, insulated floor, supply flaps on the left for the technical equipment, power socket for 230V, distribution box with FI, fresh water access, outlet for drain pipe, four stable crank supports, very stable frame and V-drawbar hot-dip galvanized. Further technical details can be found below. We offer 100km/h shock absorbers, anti-theft devices and drawbar boxes as accessories for our toilet vehicles.

Condition: used, thickness of jaw 250 mm height of jaw 80 mm clamping width 340 mm Hsdpfx Akjtqqpksiew = hydr. machine vice (pos.1) - with hand crank and 3 clamping shoes -

Condition: used, mileage: 755,000 km, power: 375 kW (509.86 HP), first registration: 11/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 5,300 mm, loading space width: 2,380 mm, loading space height: 1,800 mm, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, DB 1851 L//grain tipper/ 2 sides!!!! AT engine. Hjdpfx Ajvp Tkvekisw Trailer brake 2 - line, connections on the left, trailer socket 15-pin 7+7-pin, audio system: CD radio comfort (Bluetooth), brake connection standard and DuoMatic, compressed air connection in the driver's cab, compressed air horns (2) on the driver's cab roof, Fleetboard Dispopilot guide, Fleetboard vehicle computer, tinted windscreen, holder for Fleetboard Dispopilot, rear axle crown gear 485, info display 12.7 cm with additional display, fuel tank: 390 litres aluminum, fuel tank: 630 litres aluminum, cool box / refrigerator, air intake on the side of the driver's cab, air compressor 2-cyl., reinforced engine brake, auxiliary drive MB 131-2c, parameterizable special module, acoustic reversing alarm (warning signal outside), circuit breaker, seats in the driver's cab: driver's seat comfort suspension seat, outside sun visor, sun blind side window, driver's door, additional stabilizer, rear axle / trailing axle, socket 24V in the passenger footwell additionally, Fleetboard preparation, gearbox oil cooler Emissions standard EURO 6, axle configuration: 4x2, axle load front axle 7.5 t, Actros 4, trailer socket 24V / 15-pin, exhaust to the outside right, outside mirror electric. adjustable and heated, differential lock rear axle, steel compressed air tank, medium compressed air unit, driver's cab: width 2.30 m, driver's cab: L StreamSpace, driver's cab: steel-sprung, comfort, driver's cab floor with engine tunnel 170 mm, suspension: leaf / air, suspension: front springs 7.5 t, 2 leaf, electric windows, generator 100 A, gearbox 12-speed - type: G 281-12, urea tank (AdBlue): 60 ltr., body/structure: chassis, comfort bed below, comfort locking system, communication interface, radiator shutter, regulated power steering pump, engine 12.8 ltr. - 375 kW R6 diesel (OM 471), engine compartment encapsulation, ramp mirror, residual heat utilization, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, seats in the Driver's cab: Driver's seat backrest foldable, voltage converter 24V / 12V 10 A, front splash guard, front axle stabilizer, outside left storage flap, 24V socket in driver's cab, tachograph / EC control device, door extension for driver's cab, aerodynamically shaped underbody paneling, front underrun protection, preparation for CB radio, preparation for toll collection, cranked front axle, regulated water pump, permissible total weight 18.00 t, additional heating (water)

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) Hjdpfx Aergzv Nekiow * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: as good as new (ex-display), overall weight: 1,300 kg, empty load weight: 940 kg, maximum load weight: 260 kg, loading space length: 3,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 6 people. Hsdpfxsqwi H Nj Akiow The insulated *stay trailer* is suitable for all seasons. The 50 mm sandwich construction and 60 mm insulated floor keep out the heat and cold. The electric heating provides support in winter. A crew trailer can be used on any construction site. It is even easier to get to the construction site with such a *car trailer* as it can be driven to the construction site behind almost any car. It can also be used as a *burro trailer*. Our construction trailers have as standard an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs for 6 workers, shelf, window with safety cover, coat hooks, four stable crank supports, 230V power socket, stable frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet room with toilet, storage room, other sizes for up to 16 people, 100 km/h shock absorber and anti-theft device.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1438-135-1203, Offer 25251 Hodpfx Akow Id Ndoiew Technical Data: - Drilling capacity in steel ST 60: 45 mm - Drilling capability in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward/reverse rotation - 3 feeds with electric magnetic clutch: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Space required approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice - Quick-action drill chuck 1 - 13 mm - Emergency stop button - Lighting

Condition: new, functionality: fully functional, empty load weight: 364 kg, maximum load weight: 1,636 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Flatbed Trailer 250/2 C 2T NEW VEHICLE Internal dimensions: 254cm x 151cm Side board height: 40cm Loading platform height: 71cm Total weight: 2000Kg Payload: 1636Kg Hedoww A Dtopfx Akiow Braked tandem-axle flatbed trailer Overrun brake and parking brake by KNOTT 2x 1000Kg axle and brake with reverse automatic Bolted and hot-dip galvanized steel frame Galvanized steel sheet side boards with safety latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Support wheel 6x lashing eye 13" tire M+S tire Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors 2x U-shaped chock OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE, FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Integrated ramp, aluminum or steel -Folding crank rear supports -Anti-theft device -Net with fine or coarse mesh -H-frame -Replace steel side boards with aluminum side boards -Leaf screen in various heights, also closed -Extension side boards, aluminum or steel -Flat cover with or without rail -High cover 140cm -Automatic support wheel Further accessories available on request! Plus freight to Gera and vehicle registration document 150 € net Pictures are for illustrative purposes and may show optional accessories that incur an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, including for caravans. Wide range of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers.

Condition: new, empty load weight: 1,400 kg, maximum load weight: 1,300 kg, overall weight: 2,700 kg, loading space length: 4,490 mm, loading space width: 2,050 mm, loading space height: 2,300 mm, Promotional trailer for trade shows as a turnkey system stand. With a trade show trailer, you save both time and money. Who isn’t familiar with the lengthy process of assembling a trade show display system? Many hands make light work, but the setup can still be tedious. As a dealer for car trailers who has attended trade shows, city festivals, business expos, or similar events and has sold on-site, I always found traditional exhibition stands troublesome. Too much staff and lengthy set-up times—these issues are eliminated with a trade show trailer. Hodpsyk Hhzefx Akiow Once you’ve equipped your car trailer for promotional purposes and branded it, you’re ready to go. Upon arrival at the exhibition grounds, you can unfold the mobile stand in no time and start your sales or promotional activities immediately. Here is an overview of our useful and essential standard features for the promotional trailer: - Entry door with personnel lock - Step on the drawbar - Fold-out stairway with lift-assist, approx. 340x110cm - Folding handrails - Lockable sales hatch with lift-assist, approx. 340x110cm - Walkable roof (max. load 70kg) - Promotional banner approx. 450x80cm, can be raised with lift-assist for outdoor branding - Ladder - Four sturdy crank supports - External 230V power inlet - Distribution box with residual-current device (RCD) - Nine power sockets - Two linear luminaires with switches - Silver sandwich construction on the outside, white on the inside - Robust welded chassis - Extra sturdy, hot-dip galvanized V-drawbar This ensures a professional, efficient, and mobile presence at any event.

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement Hodpfjyhkquox Akijw - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: ready for operation (used), Year of construction: 2001, Two identical Volvo L180D wheel loaders available, operating hours: approx. 30,000h, weight: 32.7t, engine type: Volvo TD 122 KHE, rated speed: 2100rpm, power SAE J1995 (gross): 209kW (284HP), power ISO 9249/SAE J1349 (net): 206kW (280HP), max. torque: at 900rpm, torque SAE J1995 (gross): 1580Nm, torque ISO 9249/SAE J1349 (net): 1580Nm, displacement: 12l, onboard voltage: 24V, batteries: 2x 12V, battery capacity: 2x 140Ah, cold cranking current per battery: 1050A, reserve capacity per battery: 290min, alternator: 1680W/60A, starter power: 6.6kW (9HP), operating weight: 26-29t. Equipment: engine: high-performance low-emission diesel engine, 6-cylinder inline design, direct injection, turbocharger, charge air cooling, 4-stroke, replaceable cylinder liners, air filtration system: three-stage, cooling system: hydrostatically driven fan with separate cooling circuit for the charge air cooler, torque converter: single-stage, transmission: Volvo HT 220 automatic powershift transmission with countershaft and single-lever control, shifting system: Volvo Automatic Power Shift Generation II (APS II) with driving mode selector, axles: Volvo axles with full-floating axle shafts and planetary hub reduction, cast steel axle housings, rigid front axle, oscillating rear axle, 100% differential lock on the front axle, transmission type: Volvo HT 220, torque multiplication: 2.27:1, braking system: wet disc brakes, fully enclosed, oil-cooled, externally mounted on the axles. An on-site inspection is possible. Hsdpjzadmaefx Akiew