Used Corner Rounder for sale (2,632)

Condition: used, mileage: 35,670 km, power: 375 kW (509.86 HP), first registration: 06/2023, fuel type: diesel, empty load weight: 16,000 kg, maximum load weight: 17,000 kg, overall weight: 33,000 kg, axle configuration: 6x6, wheelbase: 4,200 mm, brakes: engine braking, color: brown, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, crane, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, StreamSpace, Mercedes PowerShift 3, long cab, 1 comfort seat, 1 bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, electric roof, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, high beam headlights, work lights, storage compartment, leaf-air suspension, crane behind cab, emergency stop, grabber control, foldable, elevated seat, 2-point hydraulic support, 2 hydraulic outriggers, green environmental badge. Wheelbase: 4200 mm, Body: SZM with Palfinger Epsilon S260Z96 crane with crane cabin, 9t front axle, rear axle planetary gear 300, 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axle, stabilizer on front axle and 1st rear axle, reinforced stabilizer on 2nd rear axle, condensate monitoring for compressed air system, electronic parking brake, smoker's package, seatbelt monitoring, comfort bed below, electric auxiliary air conditioning, waste heat recovery, warm water auxiliary heater, additional thermal insulation, reversing warning, PSM 2nd generation, StreamSpace, rain sensor, light sensor, electric lift roof, MirrorCam, comfort locking system, off-road driving program, Mercedes PowerShift 3, PowerShift Advanced, multimedia cockpit, Remote Online, Remote Connect, pre-equipment for toll collection, navigation system, transmission oil cooler, LED daytime running lights, reinforced engine mounts, refrigerator, high-performance engine brake, protective plate under bumper, climate package, auxiliary drive MB 123-10c MPA N-/M speed. Kjdpfoy Ummtox Aa Ijdn Load chart: 4m - 5300kg, 5m - 4230kg, 6m - 3520kg, 7m - 3000kg, 8m - 2610kg, 9m - 2300kg! Grabber available at an extra charge! Suitable Doll timber trailer for €36,900.00 (net) extra charge available, see -9277-! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 40,000 kg, tire size: 325/95R24, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, StreamSpace, Mercedes PowerShift 3, long cab, 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, aluminum fuel tank, green environmental sticker. Wheelbase: 3600 mm, 8t front axle, rear axle planetary gear 16t, crown wheel 300, electronic braking system with ABS and ASR, ABS switchable, drum brakes on front and rear axle, stabilizer on front axle, condensate monitoring for compressed air system, electronic parking brake, smoker package, seatbelt monitoring, lower comfort bed, construction site dust filter, electric lifting roof, prep for upper comfort bed, reversing warning system, StreamSpace, light sensor, economy/power driving programs, Mercedes PowerShift 3, PowerShift Advanced, multimedia radio with touch display, classic dashboard, tank capacity: 320l + 480l, transmission oil cooling, LED daytime running lights, high performance engine brake, protection plate under bumper, cyclone pre-filter for coarse dust, Grounder, PTO MB 131-2c pump. Kodpeyrt Siofx Aa Iedn Export only! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted!

Condition: used, mileage: 226,785 km, power: 330 kW (448.67 HP), first registration: 02/2016, fuel type: diesel, overall weight: 18,000 kg, tire size: 395/85R20, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, hydraulics, immobilizer system, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, Mtl. house, 2x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), power take-off, automatic, differential lock, fog lights, rotating beacon, storage box, leaf suspension, tow bar air+light, roof hatch, EBS, environmental badge green Wheelbase: 3900 mm front axle 9t, differential lock front axle, rear axle ring gear 300 planetary 13.4t, axle ratio i = 4.333, ABS can be switched off, drum brakes VA and HA, stabilizer VA and HA, construction site filter, transmission support arms optimized for removal, offroad drive program, transmission G 330-12/11.63-0,77, transfer case VG 3000-3W 1.04 selectable, twin-disc clutch, Mercedes PowerShift 3, engine OM471, protective plate under bumper, NA MB 131-2c pump, engine output rear c hydraulic pump, GROUNDER, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ksdpfsvhk Shox Aa Iodn - .

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 13,865 kg, maximum load weight: 12,135 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, company installation, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off, vertical exhaust, differential lock, fog lights, rotating beacon, leaf suspension, air-light-hydraulic trailer coupling, aluminum tank, underrun protection, swinging tailgates, roof hatch, green environmental badge Kdodsyvr Nvjpfx Aa Ion Wheelbase: 3600 mm Body: Meiller 3-way tipper body 9t front axle, rear axle crown wheel 300 planetary 13.4t, stabilizer on front axle, reinforced stabilizer on 2nd rear axle, drum brakes on front and rear axles, electronic braking system with ABS and ASR, ABS switchable, condensate monitoring for compressed air system, electronic parking brake, off-road driving program, Mercedes PowerShift 3, transmission oil cooling, ClassicSpace, comfort central locking system, rain sensor, pre-installation for toll collection, construction site filter, cyclone pre-filter for coarse dust, residual heat utilization, additional hot water heater, PSM 2nd generation, tank guard plate, tank capacity: 290l, LED daytime running lights, high performance engine brake, guard plate under bumper, seat belt monitoring, reverse warning system, 6mm thick tipping bed floor, Meiller 7-piston pump type 275, Mercedes 131-2c PTO pump. Spare wheel available at extra cost! Day registration: 25.06.2025 ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors.

Condition: used, mileage: 450,795 km, power: 460 kW (625.43 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 13,815 kg, maximum load weight: 12,185 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, next inspection (TÜV): 07/2026, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 5,100 mm, loading space width: 2,360 mm, loading space height: 1,050 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace cab, Mercedes PowerShift 3, steel body, mounting house, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO, differential lock, fog lights, high beam, work lights, rotating beacon, storage box, leaf suspension, Bordmatik (automatic sideboard control) left, air-light-hydraulic trailer coupling, aluminum tank, underride protection, roof hatch, green environmental badge. Wheelbase: 3600 mm, Body: Müller 3-way tipper with left Bordmatik, 7.5t front axle, rear axle with 300 planetary gear, 13.4t, electronic braking system with ABS and ASR (ABS can be deactivated), disc brakes with full protection on front and rear axles, turbo retarder clutch, additional parking brake on front axle, condensate monitoring for compressed air system, front and rear axle stabilizers, residual heat utilization, auxiliary hot water heater, construction site filter, ClassicSpace, comfort locking system, off-road driving program, Mercedes PowerShift 3, LED daytime running lights, Fuel Performance Pack 1, pre-installation for toll recording, protection plate for tank and bumper, high-performance engine brake, transmission oil cooling, Powertrain Pack, Protection Pack, Grounder, PTO MB 131-2c pump. The vehicle received a new turbo retarder clutch at Mercedes in 06/2021 at approx. 234,000 km! Kdjdpfx Aaexap Rvj Ion Loading height approx. 1570 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 450,795 km, power: 460 kW (625.43 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 12,000 kg, maximum load weight: 14,000 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, next inspection (TÜV): 07/2026, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Mercedes PowerShift 3, employee cabin, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), differential lock, fog lights, high beam headlights, work lights, beacon, storage box, leaf spring suspension, trailer coupling (air/light/hydraulic), aluminum tank, underrun protection, roof hatch, green environmental badge. Wheelbase: 3600 mm. Superstructure: used 20t Hyva 20-47-S hooklift system suitable for containers up to 5.7m. 7.5t front axle, rear axle crown gear 300 planetary 13.4t, electronic braking system with ABS and ASR, switchable ABS, disc brakes with full protection front and rear, turbo-retarder clutch, additional parking brake on front axle, condensate monitoring for compressed air system, front axle stabilizer, rear axle stabilizer, residual heat utilization, additional hot water heater, construction site filter, ClassicSpace, comfort lock system, offroad driving program, Mercedes PowerShift 3, LED daytime running lights, Fuel Performance Pack 1, pre-installation for toll collection, protective plate for tank and bumper, high performance engine brake, transmission oil cooling, Powertrain Pack, Protection Pack, ground clearance package, MB 131-2c PTO pump. In 06/2021, at approximately 234,000 km, the vehicle received a new turbo-retarder clutch at Mercedes! The price is with hooklift system, plus €7,000 to €8,000 assembly costs! On request and at an extra charge of approx. €12,000 (net), also available with a new Hyva hooklift system! Kdodpfxoxdbxms Aa Ijn ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, mileage: 208,110 km, power: 390 kW (530.25 HP), first registration: 09/2019, fuel type: diesel, empty load weight: 13,700 kg, maximum load weight: 12,300 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, brakes: retarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace cab, Mercedes PowerShift 3, company property, 1x comfort seat, 1x bunk, seat heating, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO, differential lock, fog lights, work lights, leaf suspension, trailer coupling with air and electric connections, aluminum fuel tank, container lock, underrun protection, rear stabilizer, roof hatch, remote control, green environmental badge. Wheelbase: 3300 mm Kdedpfsx I I Dasx Aa Ion Body: Palfinger tele skip-loader system with remote control, 8 t front axle, rear axle: planetary gear 13.4 t with 300 mm crown wheel, electronic braking system with ABS and ASR (ABS can be deactivated), disc brakes with full protection front and rear, secondary water retarder, condensate monitoring for compressed air system, front axle stabilizer, smoker's package, lower bunk, residual heat utilization, additional hot water heater, construction site filter, PSM, ClassicSpace, comfort locking system, offroad driving program, Mercedes PowerShift 3, multimedia touch radio, pre-installation for toll recording, LED daytime running lights, high-performance engine brake, protection plate under bumper, transmission oil cooling, Grounder, refrigerator, MB 124-10c MPA PTO normal/economy speed. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 146,755 km, power: 350 kW (475.87 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 15,232 kg, maximum load weight: 16,768 kg, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, next inspection (TÜV): 09/2026, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 5,800 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, with house, 1x comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), fog lights, work lights, leaf suspension, Bordmatic left, aluminum tank, 2nd axle with steering, lashing points, side underrun protection, roof hatch, green environmental sticker Wheelbase: 4550 mm Kdedpfjyhn Anox Aa Isn Body: Meiller 3-way tipper body with Bordmatic left 7.5t front axle, rear axle planetary 13.4t crown wheel 300, electronic braking system with ABS and ASR, ABS switchable, drum brakes front and rear axle, secondary water retarder, condensate monitoring for air pressure system, road paver package, stabilizer front and rear axle, residual heat utilization, construction-site filter, PSM, ClassicSpace, reverse warning system, comfort central locking, offroad driving mode, Mercedes PowerShift 3, pre-equipment for toll collection, LED daytime running lights, high-performance engine brake, protective plate under bumper, transmission oil cooling, Meiller 9-piston pump type 296/54, grounder, PTO MB 131-2c pump, lashing pockets in tipper body floor. Loading height approx. 1600 mm! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm Kjdpoy Nkwlofx Aa Ijdn • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Kjdpfx Aeyxhaioa Iodn Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic cleaning machine with rotating table Kodpfxeywcv No Aa Iedn CNC cleaning machine

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 Kjdpjy Akpuefx Aa Iodn manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Full technical specifications in the attached document. Please note: 5 extra machines are available (ARBURG Allrounder 420C 1000-250) Contact us for more information. Clamping force: 1000 kN Opening force: 35/250 kN Opening stroke: 500 mm Kdjdpfx Ajyx D Ayea Isn Mould installation height (min): 250 mm Distance between platens (max): 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Injection pressure: 2470 / 1820 / 1390 bar Screw diameter: 30 / 35 / 40 mm

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter - Face milling cutter Kjdpjfc Tq Esfx Aa Isdn Make Mitsubishi Type AHX 640 W 160 C 22 R Multicorner Face milling cutter for high feed rates for 22 heptagonal inserts Cutter diameter 160 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Kdodpfeyab R Nsx Aa Ijn Robot WITTMANN W818-2558 (2013)

Year of construction: 2000, condition: good (used), functionality: fully functional, machine/vehicle number: MF25-26, Corner Former MF 25-26 – Hydraulic, Year of Manufacture 2000 For sale is a used, robust corner former (Eckenformer) of the type MF 25-26, ideal for precise processing of sheet metal edges and corners in metalworking applications. Kdedpoy D A Eksfx Aa Ion Technical data: Type: Corner Former MF 25-26 Year of manufacture: 2000 Voltage: 400 V / 50–60 Hz Power: 2.5 kW Hydraulic pressure: 150 bar Tank capacity: 40 liters Weight: approx. 500 kg Manufacturer: ACF Engineering & Automation GmbH, Austria Description: The machine is in used, fully functional condition. It is perfectly suited for industrial sheet metal processing, especially for forming and finishing corners. Thanks to its hydraulic design, it enables consistent and powerful operation. The compact construction and solid build ensure high stability and long-term reliability in production environments. Key features: - Heavy-duty industrial design - High operating pressure for precise results - Easy integration into existing production lines Condition: used, ready for operation (see photos)

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units Kdsdpfx Aoygx Uroa Ien

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english CEE-socket 16A Kdodpfxoyv D T Ts Aa Ijn core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: used, Year of construction: 2005, functionality: fully functional, clamping force: 2,500 kN, clearance between the columns: 630 mm, overall weight: 14,500 kg, heating capacity: 36 kW (48.95 HP), pump power: 75,000 W, power: 111 kW (150.92 HP), input frequency: 50 Hz, input voltage: 400 V, The following template has been translated into Hungarian and filled in with the data: "German: We offer this used ARBURG Allrounder Selecta 630 S 2500-2100 injection molding machine, manufactured in 2005." Hungarian: We offer a used ARBURG Allrounder Selecta 630 S 2500-2100 injection molding machine, manufactured in 2005. Machine number: 197628 Year of manufacture: 05/2005 Weight: 14500 kg Clamping force: 2500 kN Operating voltage: 400 V Frequency: 50 Hz Heating power: 36.0 kW Pump motor power: 75.00 kW Total installed power: 111.0 kW Pump operating hours: 38989 Automatic operating hours: 37209 The machine is used occasionally, so the operating hours may vary. Wittmann robot is not included in the price. Kdedpjzcdw Defx Aa Isn If you have any questions or need further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) Kdedpfx Aeyxdwdea Ien • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Format: 0x0 Equipment: Kodpfsx Rh D Sjx Aa Isdn Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Kdjdpfx Aaorxtpdj Ijn Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Kodpfx Aoytd Spoa Isdn Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, ARBURG Allrounder 375 V 500-170 Stock no.: 503615 Manufacturer: ARBURG Model: Allrounder 375 V 500-170 Control: Selogica-direct Year of manufacture: 2013 Operating hours: 36,163 h Kdjdpfxjytdfij Aa Isn Technical Data – Clamping Unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum platen distance: 302 mm Opening stroke: 225 mm Rotary table diameter: 900 mm Ejector force: 70 kN Movable platen centering diameter: 125 mm Tool weight: 230 kg Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 59 cm³ Injection pressure: 2,500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 3 m x 1.6 m x 3.48 m Total weight: 3,540 kg Equipment Display language: German Rotary table 1x hydraulic core pull Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate safety

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ Kjdpfxjydnigs Aa Ijdn • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A