Used Copper for sale (505)

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Unit Weight: 200 lbs (91 kg) Interior Metal: 300 Series Stainless Steel Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Kodpfx Agjxxygxo Uodg Temperature Uniformity (Midrange): ±0.25 °C Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE

Condition: ready for operation (used), Year of construction: 2019, This 3-axis Bodor P3015 was manufactured in 2019 and is a robust fiber laser cutting machine. It features a 1.5 kW fiber laser, capable of cutting a variety of materials including carbon steel and aluminum, with a cutting area of 3000 mm x 1500 mm. It includes a Bodor CNC control system and an exchange table. If you are looking to get high-quality sheet metal cutting capabilities consider the Bodor P3015 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Kdedjx Uzv Ajpfx Ag Ueg • Number of axes: 3 / cutting area (x x y): 3000 mm x 1500 mm / positioning accuracy: ±0. 03 mm / repeat positioning accuracy: ±0. 02 mm / max cutting speed: up to 60 m/min / supported materials: carbon steel, stainless steel, aluminum, brass, copper • Control system: cnc control system / software: operating system, compatible with common cad/cam formats • Laser type: fiber laser / laser power: 1. 5 kw • Maximum z-axis travel: typically 100 mm (depending on model) • Table type: exchange table (depending on configuration) • Power supply: 400v / 50hz / total power consumption: approx. 2030 kw (depending on model and auxiliary systems) / cooling system: water cooling (chiller) / assist gas: oxygen, nitrogen, air • Weight (kg): approx. 60008000 kg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,000 h, controller manufacturer: AMADA, controller model: AMNC-3i, This 3-axis AMADA ENSIS 3015 AJ fiber laser cutting machine was manufactured in 2021. It features a high-capacity 9000 Watt fiber laser, capable of cutting up to 25 mm thick mild steel, stainless steel, and aluminum. The machine includes an automatic pallet changer, NC-focus control, and a 21.5” touchscreen AMNC-3i control system. Ideal for precision cutting, consider the opportunity to buy this AMADA ENSIS 3015 AJ. Contact us for more information about this machine. • Type: AMNC-3i • Screen: 21.5” touchscreen • Operating system: Windows 7 • Laser source: Laser diode-pumped fibre laser • Type: AJ-9000 • Laser power: 9000 Watt • Laser wave length: 1.08 µm • Stability: +/- 2% • Pulse frequency: 1–10000 Hz • Duty range: 1-100% • Working range: 3070 mm x 1550 mm • Positioning speed: 170 m/min • Table loading weight: 920 kg • Mild steel: 25 mm • Stainless steel: 25 mm • Aluminium: 25 mm Kdodjx Uxkwjpfx Ag Usg • Brass: 18 mm • Copper: 12 mm • Machine weight (without pallet changer): 9500 kg • Automatic pallet changer • NC-focus control • Oil spraying function • Nozzle changer (16 nozzles) • Sensor cutting head • Diode for positioning • Cutting process monitoring • Safety device • Conveyor belt • Transformator • Cooling unit • Dust collector • Control panel pallet changer

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min - Drive: 11kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" under 5 mm " 18 - 22 Z" Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" - Saw guides Ksdpovx Hugjfx Ag Ujdg The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 4000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 22 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm Kdsdpfegvq A Eox Ag Usg - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 800 kg traversing speed 140 m/min total power requirement 42,5 kW dimensions of the machine ca. 10050 x 4920 x 2200 mm Kdodpfx Agoun Um Se Usg CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT *4 servo motors for all axial movements *CNC CONTROL PANEL 15 5” touch screen *IPG laser sources and coolers integrated *Precitec Procutter cutting head system *AIR FILTER (compressed air filter) *CONVEYOR BELT under cutting area *Closed housing and specially coated filter protection windows *LOADING / DISCHARGING SYSTEM *PROPORTIONAL GAS AND PIPE SYSTEM

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min Kdodpfx Ager I E Exo Usg - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° Kdjdpfjk Egrtjx Ag Usg - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 6000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 21 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: Kodpfx Aogvq D Ueg Uodg - Number of pieces 2 (35 seconds for changing) - automatic change of tables - d 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine Kdodpfx Aek Uqhaeg Ujg - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 1500 kg total power requirement 21 kW weight of the machine ca. 10,4 t Kdodevuz I Hjpfx Ag Usg dimensions of the machine ca. 5,2 x 4,2 x 2,62 m CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT *4 servo motors for all axial movements *CNC CONTROL PANEL 15 5” touch screen *IPG laser sources and coolers integrated *Precitec Procutter cutting head system *AIR FILTER (compressed air filter) *CONVEYOR BELT under cutting area *Closed housing and specially coated filter protection windows *LOADING / DISCHARGING SYSTEM *PROPORTIONAL GAS AND PIPE SYSTEM

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm Kjdjppgcyepfx Ag Uedg * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, saw blade diameter 355 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 170 x 110 mm Kdedpfx Agjxabypj Ujg turning speeds 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees - 45 / + 0 total power requirement 3.5 kW weight of the machine ca. 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts - vice with quick adjustment - large LED work light on the underside of the handle * to illuminate the work area - secure stand thanks to non-slip hard rubber feet - with spindle lock for quick saw blade changes - incl. 1x saw blade for steel 355x25.4x2.4mm Z66

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: Kdsdpfx Aoxak H Ssg Ujg - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg Kdjdpoxacfgefx Ag Ujg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere Kdjdpjxaavcofx Ag Ujg cutting medium Druckluft output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and simplicity Handling makes them the ideal candidate for crafts, workshops and Industry. Cuts carbon steel, stainless steel, aluminum, copper... Characteristics - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow to test air pressure . without having to trigger the burner. - Powerful compact system - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. separation cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included: - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Condition: new, cutting range for steel to 12.0 TS mm cutting range for steel to 8.0 QS mm capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V weight 17,9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and simplicity Handling makes them the ideal candidate for crafts, workshops and Industry. Cuts carbon steel, stainless steel, aluminum, copper... Characteristics - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow to test air pressure . without having to trigger the burner. - Powerful compact system Ksdpfx Agsw U U Tgj Uedg - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. separation cut for carbon steel .. 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included: - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The air plasma cutting system Avalon 65 AIR with integrated Compressor is your reliable partner for the demanding Mission. Make separation cuts up to one with the Avalon 65 Air Material thickness of 18 mm. Characteristics : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc properties - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch to activate airflow around test air pressure . without having to trigger the burner - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure, missing wearing parts, . Pilot arc overload. * max. cutting thickness carbon steel =35 mm * optimal cutting thickness carbon steel =25 mm * Stainless steel =25 mm * Aluminum =20mm * Copper =14 mm Ksdpfx Ajxaaicog Uedg Special equipment included: - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work Kdsdpfx Agoxaac Ne Ujg - Also ideal for copper and coated pipes - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Year of construction: 2026, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate - new machine with 1 year warranty Kodpfx Agex Szkho Uodg DELIVERY TIME APPROX. 4 MONTHS

Condition: new, Year of construction: 2026, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum Kjdpfxsx Szh Ho Ag Usdg · RAL color according to the customer´s choice · New machine manufactured in the EU

Condition: new, Year of construction: 2026, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU Kdedpex Szbasfx Ag Usg

Year of construction: 2026, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet Kdodpfsx Sza Ajx Ag Ujg - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate - new machine with 1 year warranty DELIVERY TIME APPROX. 4 MONTHS

Condition: as good as new (ex-display), Year of construction: 2022, This price applies exclusively to the demonstration machine (freight and assembly extra). Machine Dimensions: • (L x W x H) 5,308 mm x 2,810 mm x 1,860 mm, Length with filter: 6,582 mm. Technical Details: • Year of manufacture: 2022 • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 2 kW • Z-axis travel: 125 mm • Max. simultaneous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 14 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm • Cutting capacity: • Steel: 12 mm • Stainless steel: 6 mm • Aluminum (AlMg3): 6 mm • Brass: 6 mm • Copper: 3 mm Standard Equipment: • Control system: Bosch Rexroth • Laser head: Precitec light Cutter F 125 Focus (manual) • Sheet metal thickness detection and measuring system • Positioning laser diode • Central lubrication unit • Chip tray • Software: Lantek or Metalix CAD/CAM software with AutoNesting • Remote control: Remote maintenance • Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline Kdodpod R Uzrjfx Ag Ujg • Flyline The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Other machines are available for demonstration at our Staufenberg facility. Further information is available upon request.

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 807-0-4 -Contents: Jacket space bronze 35.6 l / Tube space copper 15.3 l Ksdpfx Ajwu S Tfjg Uedg -Operating pressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg