Used Continuous Furnace for sale (4,933)

Condition: new, Gas heated furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C Nsdpfx Agscditnowjkw loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Condition: excellent (used), Continuous mixer M-tec D 10 Drive power 2,2 kW Mixer capacity approx. 20 l/min Nkodpfx Aeirfp Isgwow 14 pieces available Very good ready to use condition, directly from production!!!

Condition: used, Large Gas-Fired Furnaces for Sale: 7500 long x 2780 wide x 2000 height. These are Internal - bed sizes Gas fired Eurotherm Control 4102. Will heat up steel to 1000 degrees C plus. Both installed and working order. Njdpfx Agjvitnhswokw Spares available including a controller and thermocouples.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN49983, Chamber furnace in very good condition. 12 months warranty. - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Fresh air and exhaust air with flaps, electrically operated by Belimo actuators - Inlet fan controlled via frequency inverter and regulator - JUMO control system (language can be switched!) - Additional drag element type S for external data logging - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current: 26 Ampere - Connection voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed connection with 32 A plug - Documentation and CE declaration Nsdsx U Ekdspfx Agwskw We have several units of this furnace model in stock. Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, drying oven, tempering furnace, laboratory furnace, hardening furnace

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE Nodpfx Ajvyq Dujgwskw -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For consistently clean components in continuous operation Continuous flow cleaning system made of stainless steel with oil separator for uninterrupted material throughput. The parts to be cleaned pass continuously—or, if needed, in cycles—through successive treatment zones. Cleaning is carried out by passing the parts by fixed nozzle systems. Designed for components with dimensions approx. 400 x 100 x 200 mm Wire link conveyor transports the components lying flat or standing upright through the cleaning system • Surrounding nozzle frame – the offset nozzle arrangement enables all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle and frame adjustment to suit component • Customizable useful dimensions, load capacity, and pump output Process steps occur in successive treatment zones: Nedpsxcun Esfx Agwokw • Spray cleaning – series connection of various wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank capacities: Washing tank: 800 liters Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pumps: 3.0 kW Rinsing tank pumps: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine includes stainless steel drip trays for leakage protection—these are included in the price and will be delivered with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Nkodpfxsxcb Hne Agwow Max temperature: 1000°C

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Nodpfx Asfzccnegwokw 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Njdpofx Nfmefx Agwokw Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2007, Glass tempering furnace GMC FOR GLASS INDUSTRY THF 150300S - Year: 2007 1500x3000 mm 210x75 mm 2.8-19 mm 16380x5000 mm Njdpfsx Hxutsx Agwekw 400 V Control cabinet – 2 pcs Computer with monitor, mouse, keyboard Additional computer Roller table 3500x1550 mm – 2 pcs

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Nkjdeyfv N Ropfx Agwsw

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Nkjdpfx Aexp Rbhsgwow

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Njdjvxvgrjpfx Agwskw

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Nkjdew Igvtspfx Agwjw

Year of construction: 2019, condition: ready for operation (used), A belt washing machine is available for pre-washing and feeding food into downstream machines. Input height: 1000mm, output height: 1000mm, machine dimensions X/Y/Z: approx. 4600mm/1500mm/1500mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Nksdpfxeu Tiyve Agwew

Year of construction: 2018, condition: ready for operation (used), Two identical Göztepe belt fryers are available for vegetables (onions, potatoes, nuts, etc.). Working length: 6800mm, working width: 700mm, inlet height: 1280mm, outlet height: 1060mm, working temperature: 180°C, plastic belt length and width bottom: 14000mm/720mm, plastic belt length and width top: 8500mm/720mm. Machine dimensions X/Y/Z: approx. 6900mm/1800mm/3500mm, total output: 135kW. Documentation available. On-site inspection is possible. Nkodpfx Aou Tiy Negwew

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Nksdpeygw S Aofx Agwew

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Nkodpext Rmlsfx Agwow

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Nksdpfx Astxb Avogwew

Condition: ready for operation (used), Year of construction: 2015, Connected load: 160kVA, length: 8328mm, width: 2768mm, height: 3665mm, weight: 9.5t, with documentation. Nkjdpfxelnmv Dj Agwjw

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Nkodpfx Asw Emyzsgwow

Condition: ready for operation (used), Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Nkjdju N Hdyspfx Agwsw

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Nkodpfx Agotxb Apewsw

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Nkodpjxyk Trofx Agwew

Year of construction: 2010, condition: ready for operation (used), A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible. Nsdpjuzx Uujfx Agwjkw