Used Continuous Furnace for sale (5,101)

Condition: new, Electrically heated continuous furnace, make VEI-Engineering Pjded Sg Hhepfx Ad Negg type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Pgodpfx Asyabxyed Nsg Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Year of construction: 2016, condition: new, heated length: 4000 mm conveyor belt width: 900 mm temperature: max. 950 ° C Podpfocdizfsx Ad Njgg

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C) Pgsdpfoxpuahjx Ad Njg

Year of construction: 2001, condition: used, machine/vehicle number: 12117, Continuous Furnace / Brazing Furnace Pgedpfswku N Usx Ad Nsg Max. operating temperature: 1120°C Normal operating temperature: 1050°C Conveyor Belt: Useful width of conveyor belt: 250mm Useful height of conveyor belt: 150mm Heating Chamber: Heating Chamber Length: 1530mm Heating Chamber Width: 500mm Height: 500mm Installed Power, Gas: 33kW Number of Heating Zones: 3 Number of Control Zones: 3 Voltage: 3 x 400/230V Frequency: 50Hz You are welcome to visit us by appointment.

Year of construction: 2012, condition: ready for operation (used), System type: - Pressing station with subsequent continuous furnace (curing) and sorting station Psdpfx Aswbt N Usd Njgg - Year of manufacture: 2012 - Condition: Fully functional Process description: - Ceramic slabs are manually placed on a buffer belt - Transport of the slabs under the pressing station - Pressing under pressure and heat - Further transport of the slabs into the continuous furnace - Curing at constant temperature Temperatures: - Pressing station: 120 °C - Continuous oven: 120 °C Oven length: 4m

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C Pgsdpfx Adeclupdj Nsg water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Pgedpfewkiipsx Ad Nsg

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Pgedpfx Ajxdantod Njg

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: Psdpexfcdyefx Ad Nogg - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: new, Year of construction: 2025, functionality: fully functional, Your advantages at a glance Modular operating equipment system: Enables quick and clean handling of operating resources. Highest protection class IP55: Dust and splash-water protected, ideal for demanding production environments. Maintenance-friendly: Easy maintenance due to the modular print head and a single, long-lasting filter element. Pgodpfxowpr I Ej Ad Njg Intuitive operation: Large 10-inch touchscreen display for simple setup and handling. Printing of up to 5 lines with various fonts and flexibly controllable data sources. Efficiency and sustainability: Low solvent consumption and durable components sustainably lower operating costs. The continuous inkjets are particularly suitable for industries such as cosmetics, dietary supplements, food and beverage production, pet food, chemicals, as well as logistics and packaging. Thanks to the robust construction and flexible printing options, the devices can be individually adapted. Easy integration into your system.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, As new! Used for only 15 production days. Hot Air Furnace — Capacity: 2,000,000 kca This unit is in excellent condition, practically as new, with only 15 days of operation. Ideal for industrial heating or drying applications. For more details or photos, please contact us. Pgedpfx Adjxq Rv Ie Neg

Condition: like new (used), Chanber size: Pgsdpfx Aded Sm Dis Neg 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production. Pjdpjq Nyzbefx Ad Negg

Condition: used, Year of construction: 2025, The HTST (High-Temperature Short-Time) pasteuriser from Dairy Machinery UK is designed to provide efficient pasteurization of liquid dairy products while preserving their quality and safety. Here are some key features: - Process Efficiency: HTST pasteurisation involves heating the dairy product to a high temperature (typically around 72°C and other temperatures on request ) for a short time (15-30 seconds and other timings on request ), which kills harmful bacteria and extends shelf life. - Quality Preservation: This method retains the taste and nutritional value of the dairy products better than traditional pasteurization methods, minimizing the impact on flavor and color. - Automated Control: Many HTST systems come with automated controls that monitor temperatures and flow rates, ensuring consistent pasteurisation and reducing human error. - Compliance Standards: Designed to meet industry hygiene and safety standards, HTST pasteurisers help dairy producers comply with food safety regulations. - Versatility: Suitable for various dairy products including milk, cream, cheese, and yogurt, making it a valuable asset for dairy processors. Capacities: 500 Litres to 30,000 Litres per Hour Heating: Electric, Hot water and Steam Controls: Fully Automated PLC SIEMENS CE Certified: Yes Skid Mounted: Stainless steel Skid 316L Psdpsxfr Smefx Ad Nsgg Safety valves: Yes Non return Valve: Yes Balance Tank: Yes Product Pump: Yes Water Pump: Yes Regulating Valve for Hot water: Yes Heavy Duty Construction: Yes Temperatures: 73-75-80-85-90 Depending on Request UHT Possibility: Yes Finance: Available for UK Clients

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Model - RFE 300. Serial Number - 24-810. Date of manufacture - 2024. Freon gas - R404A. Control unit: 1 x ROKK Processing Ltd SP40BC Control Unit. Serial Number - 92152600300. • Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pgsdpfxsydlg As Ad Neg Pipes for connection to pasteuriser included Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Pgodpjh Uyg Nsfx Ad Nsg

Condition: not inspected (used), 3m x 1000mm thermal oil fryer, direct from closed snack food factory where it was frying samosas and onion bhaajis. Complete with top hold down belt and teflon infeed. Machine was removed from the factory when it closed in 2015 and has been in storage ever since. Pgjdsh Uhamepfx Ad Neg

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V output 3 kw range - high tensile Innen 295x230x125 mm Pgodethr Ncopfx Ad Nsg

Year of construction: 1990, condition: used, degree max 1800 total power requirement 5 kW Pgjdpforgbyvjx Ad Nog

Condition: not inspected (used), Well maintained 7m x 1000mm thermal oil fryer, direct from closed poultry factory where it was frying chicken burgers and nuggets. Complete with top hold down belt. The hoists to lift the canopy have been lost by the storage company so these will need to be remanufactured. Machine was in lovely condition prior to being removed from the factory when it closed in 2016. Pgedpfxsht T Ils Ad Nsg

Year of construction: 2021, condition: used, Carbolite GERO Carbolite GERO Muffle Furnace ELF 11/6B – 1100 °C – Year of manufacture: 2021 Pjdjx T A U Rspfx Ad Negg Product description For sale is a Carbolite GERO muffle furnace, type ELF 11/6B, equipped with a 301 temperature controller. The unit is in good used condition and originates from professional use. The furnace has been functionally tested and reaches the set temperature (see display on photos). Ideally suited for laboratories, industry, training, material testing, ceramics, metallurgy, or research. Technical data Manufacturer: Carbolite GERO Ltd. Model: ELF 11/6B Year of manufacture: 2021 Max. temperature: 1100 °C Usable volume: approx. 6 liters Heating power: 2000 W Power supply: 230 V / 50–60 Hz Phases: 1 + N Rated current: approx. 9.7 A Temperature controller: Model 301 Country of origin: United Kingdom Certification: CE / UKCA Weight & dimensions External dimensions (W × D × H): approx. 420 × 530 × 615 mm Weight: approx. 40 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2017, Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame 6 – Platform with stairs and mixer support Pjdpfx Asx R An Eed Negg Manufacturer: IJSSEL technology

Condition: used, Manufacturer: Ernens Pgodpfx Adex Rz Rle Nsg Materials: Stainless steel. Nature of the cleaning fluid: liquid / water – Capacity: example with sultanas 600 to 800 kg/h – Feeding belt: 350 cm x 1500 mm – 2 compartment bowl 600 x 900 x 600 mm including : 1 inclined screw for product recovery d.150 mm 1 screw + horizontal draining drum d.300 mm – Heating by external recycling of the fluid

Condition: used, Material: stainless steel Pgjdpex Rz N Isfx Ad Nsg Double screw: 2 nylon brushes in two sections: Ø 200 mm x 3000 mm Quick disassembly Mounted on a mobile frame: 4 wheels Power: 0,55 kw Speed controller : mechanical Support for feeders and dosing systems Overall dimensions 3800 x 550 x 1700