Used Construction Machine for sale (76,611)

Condition: used, functionality: limited functionality, Four-compartment dosing unit, skid-mounted, mobile, used – row-type feeder. Each hopper approx. 20 t, loader feeding width approx. 3.65 m, continuous operation output approx. 400 t/h. Complete with hopper extensions, main discharge belt, separate 18 m inclined conveyor, motor-driven swiveling undercarriage, material moistening, material shortage sensors. For production of mineral mixes, base layers, etc. Option: Additional cost for new control system. Ibsdpjx Rvc Ajfx Afujc

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph = Additional options and accessories = - Originally painted - Tool box = Remarks = BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool Iedex D A R Dopfx Afujbc and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Iedpfxezrnkrs Afujbc Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: used, Year of construction: 2015, Agile 4x4 forklift, lifting capacity 2 tons. Isdpfezmgtbox Afuobc

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, Iodpsz Eh Nljfx Afujbc spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating Ibedjx D Df Njpfx Afuoc - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system. Ibsdpfxszzzm Ej Afusc

Year of construction: 2021, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Optimas PlanMatic Pro PM 200 2D / Zettelmeyer wide attachment / Year of manufacture: 2021 / In stock & immediately available / Very good condition Price: €24,890.00 net / €29,619.10 gross - Basic width: 2.00 m - Working width (hydraulically adjustable): 2.00 m to 2.60 m - Dead weight: 780 kg Iedjz Efnxjpfx Afuebc Attachment: - Zettelmeyer wide Additional features: - 2D control (see photos) - Leica MLS 820 laser - Leveling through backward and forward movement - Simple operation – short training time - Side flaps hydraulically adjustable - Simple & intuitive: A central joystick with a large display shows only the relevant information – for uncomplicated operation - Flexible & storable: Up to 46 device settings can be saved – ideal for changing carrier devices - Quick start: Automatic retraction of the blade to the 0 position at the push of a button In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal No.: 200443 = Further information = Unladen weight: 780 kg Please contact Marius Herden for further information.

Condition: new, empty load weight: 700 kg, maximum load weight: 2,800 kg, overall weight: 3,500 kg, loading space length: 3,950 mm, loading space width: 1,820 mm, loading space height: 250 mm, Car trailer for transporting construction machinery from the trailer manufacturer TEMARED model Builder3-4018/2S 3500kg. Standard equipment of the machine trailer is a stable frame, drive-over flap, bucket rest, support wheel and a V-drawbar. Isdpov A T Ihofx Afujbc

Condition: used, functionality: fully functional, fuel type: electric, Year of construction: 2019, operating hours: 624 h, machine/vehicle number: 608024, Construction year: 2019 Operating hours: 624 h Description: Vehicle weight: 930 kg Load capacity: 608 kg Cargo bed dimensions: 240 x 83 x 153 cm Iodpfx Afez Hkhgouobc CE marking: yes Technical condition: very good Visual condition: very good For more information, please contact the seller. Smartlift SL 608 vacuum lifter * 2019 * 624 operating hours * Battery-powered * Working height of 3.3 meters * Telescopically extendable arm + jib * Lateral movement * Load capacity 608 kg * Vehicle weight 930 kg * Additional hook * Two plates with long spindles Vink Machinery 6604 LZ Wijchen, NL

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SCK 60 0 0 00 10 318 98 5, empty load weight: 680 kg, maximum load weight: 2,820 kg, overall weight: 3,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 07/2001, next inspection (TÜV): 03/2028, suspension: steel, tire condition: 85 %, maximum speed: 100 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2001, operating hours: 300 h, Equipment: trailer coupling, from the vehicle registration document "permissible drawbar load, kingpin load or axle load in compliance with the total weight: drawbar load 150 kg, 1st axle 1750 kg, 2nd axle 1750 kg, tandem axle 3500 kg" 2 movable ramps; non-slip birch plywood floor; threaded support wheel; overrun brake; manual cable winch; rear fog light; 8 lashing hooks; 4 recessed, folding lashing rings; 2 wheel chocks; Extra: 2 motorcycle mountings with screw fixation Ibedpfxjyvul Tj Afujc

Condition: excellent (used), functionality: fully functional, fuel tank capacity: 10 l, color: original, overall weight: 570 kg, empty load weight: 570 kg, operation weight: 570 kg, lifting power: 150 kg/m, Year of construction: 2015, operating hours: 1,400 h, Equipment: pallet forks, Probst Jumbo-BV-Vario vacuum kerb lifter. In perfect working order but has some age related marks. Very well maintained and regularly serviced. This machine enables the laying of up to 400m of kerbs to be laid daily with just one operator feeding the kerb layer with no manual handling and just moving levers! Honda GXV390 petrol engine which is bullet proof when filters are cleaned regularly. Also available with the machine are Quick Hitch fork attachments to suit a Manitou telehandler and numerous different lifting plates to suit a variety of kerb shapes and sizes. Videos are available of the machine working. Ibjdpjxvqclofx Afusc

Condition: used, Year of construction: 2004, machine/vehicle number: 90380, Edgebanding machine, year of manufacture 2004 Isdpfx Afjxxzk Souebc

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Ibodpfxezkbiro Afusc Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2022, condition: used, Westtech Woodcracker CL190 Available immediately Year of manufacture: 2022 - Cutting diameter softwood (mm): 250 - Cutting diameter hardwood (mm): 190 - Gripper opening = shear opening (mm): 685 - Own weight (basic – fully equipped) (kg): 210 – 310 - Recommended oil flow main circuit (l/min): 40-80 - Recommended operating pressure main circuit (bar): 250 - Recommended oil flow auxiliary circuit (l/min): 20-30 - Recommended operating pressure auxiliary circuit (bar): 200 - Carrier vehicle operating weight (t): 2.5 – 7.5 - Optional: Autospeed - Optional: Accumulation gripper - Optional: Cylinder slewing drive: 2 x 40° Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are the official distribution and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz service, Iveco service, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. Iodpfx Aoyfpmpsfujbc We supply the complete range of Westtech Woodcracker products! Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: used, Westtech Woodcracker R900 R1300 Root Shears Immediately available Westtech Woodcracker R900 - Opening width: 955 mm - Cutting force (depending on operating pressure): up to 45 t - Own weight: 1,200 kg - Recommended oil flow: 100–190 l/min - Recommended operating pressure: 240–280 bar - Maximum carrier vehicle operating weight: 25 t Westtech Woodcracker R1300 - Opening width: 1,300 mm - Cutting force (depending on operating pressure): up to 65 t - Own weight: 1,200 kg - Recommended oil flow: 100–190 l/min - Recommended operating pressure: 240–280 bar - Maximum carrier vehicle operating weight: 25 t Various configurations and adapter plates available Price on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used commercial vehicles, one of the largest commercial vehicle dealers in Germany. We supply the entire Westtech Woodcracker product range! Rental available = Further Information = New: Yes Ibodpfsyfrdwjx Afujc Please contact Tobias Ebert for more information.

Condition: used, Westtech Woodcracker C450 Immediately available Features: - Collection grapple Isdpfx Afoyfqcxjujbc - Endless rotatable tiltator - Autospeed function - Cutting diameter softwood: 500 mm - Cutting diameter hardwood: 450 mm - Grapple opening width: 1,600 mm - Shear opening: 800 mm - Hydraulic flow: 80–160 l/min - Hydraulic flow for auxiliary functions (e.g. rotation): 45–60 l/min - Recommended operating pressure: 280 bar - Carrier vehicle operating weight: 20–25 t - Integrated multigrip Adapter plates available on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental available = More information = Condition: New Please contact Tobias Ebert for further information.

Condition: used, Westtech Woodcracker CL320 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening / shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended flow rate main circuit (l/min): 70 – 150 Recommended operating pressure main circuit (bar): 280 Ibedpfxeyfvp Ro Afuoc Recommended flow rate auxiliary circuit (l/min): 45–60 Recommended operating pressure auxiliary circuit (bar): 200 Carrier vehicle operating weight (t): 12 – 20 Optional: Autospeed Optional: Collector grapple Optional: Cylinder Swing Device: 2 x 48° Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products. Rental available = More information = New: Yes Please contact Tobias Ebert for further information.

Condition: used, Westtech Woodcracker G1250 Root Rake Iedpfx Asyfquzofujbc - New equipment In stock - Working width: 1250 mm - Own weight approx. 1420 kg - Hydraulic flow rate: 50-90 l/min - Operating pressure: 200-250 bar - Carrier vehicle: approx. 15-22 tons - 2x hydraulic grapple arms - Optional: fine rake Many adapter plates available on request. We are an official sales and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. We offer the complete Westtech Woodcracker range for you! Rental available = More information = New: Yes Contact Tobias Ebert for further details.

Condition: used, Westtech Woodcracker C350 Immediately available Equipment: - Collection grab - Endless rotatable tiltator - Autospeed function - Cutting diameter for softwood: 400 mm - Cutting diameter for hardwood: 350 mm - Gripper opening width: 1,430 mm - Shear opening: 700 mm - Hydraulic flow: 70–150 l/min - Hydraulic flow for auxiliary functions (e.g. rotation function): 45–60 l/min Adapter plates available on request. We are an official sales and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Ibodpfxjyfq Ibo Afujc We supply you with the complete Westtech Woodcracker product range! Rental possible = Further Information = New: Yes For more information, please contact Tobias Ebert.

Condition: used, Westtech Woodcracker W600 W820 W1000 W1350 W1800 Log Splitter Tongs Available immediately Westtech Woodcracker W600 - Jaw opening: 620 mm - Splitting force at 240 bar: 26 t Ibodpjyfqc Sjfx Afusc - Dead weight (basic version): 295 kg - Recommended oil flow rate: 25–60 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 6 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W820 - Jaw opening: 820 mm - Splitting force at 240 bar: 26 t - Dead weight (basic version): 360 kg - Recommended oil flow rate: 25–60 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 10 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W1000 - Jaw opening: 1040 mm - Splitting force at 240 bar: 26 t - Dead weight (basic version): 580 kg - Recommended oil flow rate: 40–80 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 14 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W1350 - Jaw opening: 1370 mm - Splitting force at 240 bar: 34 t - Dead weight (basic version): 950 kg - Recommended oil flow rate: 80–150 l/min - Recommended operating pressure: 220–270 bar - Carrier vehicle operating weight: 20 t - Optional: Rotator Westtech Woodcracker W1800 - Jaw opening: 1830 mm - Splitting force at 240 bar: 50 t - Dead weight (basic version): 1990 kg - Recommended oil flow rate: 100–190 l/min - Recommended operating pressure: 240–300 bar - Carrier vehicle operating weight: 20 t - Optional: Rotator Various versions and adapter plates available Price on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We can supply the complete range of Westtech Woodcracker products for you! Rental available = More information = New: Yes Please contact Tobias Ebert for further information.

Condition: used, Westtech Woodcracker C250 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 300 Cutting diameter hardwood (mm): 280 Grapple opening (mm): 930 Shear opening (mm): 450 Net weight (basic – fully equipped) (kg): 580-970 Recommended hydraulic flow (l/min): 50-100 Recommended hydraulic flow for auxiliary functions (l/min): 35-50 Recommended operating pressure (bar): 280 Ibsdpfx Asyfq U Uofusc Carrier vehicle service weight* (t): 7-15 Multigrip: integrated Optional: Autospeed Optional: Twin-cylinder slew drive: 2 x 48° Optional: Continuously rotatable tiltator Optional: Collector Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are an official Westtech Woodcracker distributor and service partner, Magni telehandler distributor and service partner, JCB construction equipment distributor and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Rental available = Further information = New: Yes Please contact Tobias Ebert for more information.

Condition: used, Westtech Woodcracker CL260 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 320 Cutting diameter hardwood (mm): 260 Ijdpfxsyfpzye Afuobc Grapple opening = shear opening (mm): 760 Own weight (basic – fully equipped) (kg): 350 – 630 Recommended main circuit oil flow (l/min): 50 – 100 Recommended main circuit operating pressure (bar): 280 Recommended auxiliary circuit oil flow (l/min): 40–60 Recommended auxiliary circuit operating pressure (bar): 200 Carrier vehicle operating weight (t): 6 – 14 Optional: Autospeed Optional: Collector grapple Optional: Cylinder swivel mechanism: 2 x 48° Adapter plates (MS01 / MS03 / MS08 / etc...) on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with more than 800 used vehicles one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you. Rental possible = Additional information = New: Yes Contact Tobias Ebert for further details.

Condition: new, overall weight: 200 kg, Year of construction: 2026, Root cutter for excavators from 20 tons upwards, very high cutting force. Ibsdpfx Afszfwqhouoc

Condition: used, Westtech Woodcracker L540 / L700 / L920 / L1200 Westtech L540: Ibedpsyfq I Iofx Afuec Jaw opening: 540 mm Splitting force (depending on operating pressure): up to 14 t Own weight (basic version): 195 kg Recommended hydraulic flow rate: approx. 25–60 l/min Recommended operating pressure: 180–240 bar Optional: Base stand Optional: Excavator attachment Optional: Yard loader attachment Westtech L700: Jaw opening: 700 mm Splitting force (depending on operating pressure): up to 22 t Own weight (basic version): 285 kg Recommended hydraulic flow rate: approx. 25–60 l/min Recommended operating pressure: 180–240 bar Optional: Base stand Optional: Excavator attachment Optional: Yard loader attachment Westtech L920: Jaw opening: 920 mm Splitting force (depending on operating pressure): up to 22 t Own weight (basic version): 370 kg Recommended hydraulic flow rate: approx. 25–60 l/min Recommended operating pressure: 180–240 bar Optional: Base stand Optional: Excavator attachment Westtech L1200: Jaw opening: 1,200 mm Splitting force (depending on operating pressure): up to 33 t Own weight (basic version): 1,100 kg Recommended hydraulic flow rate: approx. 80–150 l/min Recommended operating pressure: 220–270 bar Optional: Base stand Numerous adapter plates available on request. We are an official sales and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz service, and Iveco service, and with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Rental available = Further information = Condition: New Contact Tobias Ebert for more details.