Used Coiler Decoiler for sale (422)

Year of construction: 2008, condition: ready for operation (used), A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible. Iajdpoxgucwsfx Aagst

Year of construction: 1986, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Iaedpfxsxxzius Aagst

Condition: new, Year of construction: 2012, strip width: max. 600 mm Iaedpfx Aowzu E Doagjt strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used)

Condition: excellent (used), Year of construction: 1980, spool width: max. 1.600 mm spool ID: 150/250/400 mm coil weight: max. 4 t coil OD: max. 1.250 mm Ijdpswzuwtofx Aageat year: approx. 1980

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used) Iedpewzu Edofx Aagjat

Year of construction: 1994, condition: used, Material width: 20-80 mm Material thickness: 0,3-1,5 mm Speed: 0-40 meter/min. working direction left-right Iodsdc Ez Hepfx Aagoat Rolls: 20 pcs., diameter 30 mm Decoiler capacity: 300 kg pneumatic break

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Iaodpfxewvv Rqj Aagot Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons Ijdpfx Aasyangkjgsat

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm Iaedpew U Rztofx Aagjt strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² Ijdjw U R Adjpfx Aagjat coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm Iodpfx Aaernq T Njgoat strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t Iaodoxayy Iopfx Aagot coil OD: max. 1.600 mm

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm Iaodpfx Ajrnq Ufoagst strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t Iajdpfxexayynj Aagst coil OD: max. 1.600 mm

Condition: used, Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton Standard configuration Iedpeuqdq Eofx Aagsat braked reel, not poweredOperating instructions not available

Condition: used, Year of construction: 2001, machine/vehicle number: 07011175, Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Iaodpfsuqdgasx Aagst Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Isdpouqc Ivsfx Aagoat Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Condition: used, Year of construction: 1981, machine/vehicle number: 11798-214, Coil weight: 1 ton Iodpfx Aaeu Uc Tlogoat Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Isdpfx Aju Icgujagoat Machine can be demonstrated under power. i.D. *

Year of construction: 2010, condition: good (used), weight 3000 kg Iaodpfx Aaohhiawsgot

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Iaodpfxoxiyx Nj Aagjt

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 Iodpjt Hmk Tjfx Aageat weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m

Condition: used, Year of construction: 1985, machine/vehicle number: 30522, sheet width:120 mm Iaodpocxxq Sofx Aagot coil weight:75 kg dimensions of the machine ca.:2,50 x 1,25 x 1,50 m

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm Iajdeh Ra Spopfx Aagst coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: used, Year of construction: 1974, sheet width:130 mm Iodpfx Aecxxprjagsat coil internal dia.:300 - 500 mm coil external diameter:1200 mm